Hitachi RAC-X10HAK Instruction Manual
Split type indoor unit/outdoor unit
Hide thumbs
Also See for RAC-X10HAK:
- Installation manual (2 pages) ,
- Instruction manual (18 pages) ,
- Instruction manual (36 pages)
Related Manuals for Hitachi RAC-X10HAK
Summary of Contents for Hitachi RAC-X10HAK
- Page 1 RAS-X10HAK/RAC-X10HAK RAS-X13HAK/RAC-X13HAK RAC-X10HAK RAS-X10HAK RAS-X13HAK RAC-X13HAK...
- Page 2 The sign indicate the following meanings.
-
Page 3: Precautions During Operation
PRECAUTIONS DURING OPERATION Do not connect the power cable with an extension cable or do not plug too many leads of the other electric appliance into the socket where this cable is plugged. In addition, wire the cable with some allowances to prevent the cable from stretching. Not doing so will cause an electrical shock, heat generation or fire. - Page 4 FRONT PANEL (AIR INLET) VERTICAL MODEL WIDTH (mm) HEIGHT (mm) DEPTH (mm) RAS-X10HAK/RAS-X13HAK RAC-X10HAK RAC-X13HAK...
-
Page 5: Operation Indicator
OPERATION INDICATOR The auto restart feature prompts the air-conditioner to restart in its previous setting right after the power failure. In case of the power failure during the use of timer mode (Sleep Timer or ON/OFF Timer), timer mode is cancelled and the air-conditioner stops operation. - Page 10 Adjustment of the conditioned air in the upward and downward directions. The horizontal air deflector is automatically set to the proper angle suitable for each operation. The deflector can be swung up and down continuously and also set to the desired angle using the “...
- Page 11 When using the remote control,if there is no response from the air conditioner unit and / or the remote control has fading and dim displays,the batteries in the remote control device need to be removde and replaced with new ones...
-
Page 14: Air Filter
CAUTION Cleaning and maintenance must be carried out when filter lamp lights. Before cleaning, stop operation and switch off the power supply. AIR FILTER Clean the Pre-filter, as it removes dust inside the room. In case the Pre-filter is full of dust, the air flow will decrease and the cooling capacity will be reduced. -
Page 15: Cleaning Of Front Panel
CLEANING OF FRONT PANEL Remove the front panel and wash with clean water. Wash it with a soft sponge. After using neutral detergent, wash thoroughly with clean water. When front panel is not removed, wipe it with a soft dry cloth. Wipe the remote controller thoroughly with a soft dry cloth. - Page 16 PLEASE CHECK THE FOLLOWING POINTS BY QUALIFIED SERVICE PERSONAL EITHER EVERY HALF YEARLY OR YEARLY. CONTACT YOUR SALES AGENT OR SERVICE SHOP. Is the earth line disconnected or broken? Is the mounting frame seriously affected by rust and is the outdoor unit tilted or unstable? Is the plug of power line firmly plugged into the socket? (Please ensure no loose contact between them).