TOSHIBA USB Sleep
and Charge Utility
Trusted Platform
Module (TPM)
To enable TPM through the BIOS setup:
1. Turn on the computer. Press the F2 key When the TOSHIBA
2. Set the TPM in the Security tab to Enabled.
3. Press the F10 key.
4. Press the Y key to accept the changes. The computer will restart.
In order to change the TPM setting when the Hide TPM setting is currently
set to Yes, switch the Hide TPM setting from Yes to No.
Optional devices
Optional devices can expand the computer's capabilities and its versatility.
This section describes the connection or installation of the following
devices:
Cards/memory
■
ExpressCard (ExpressCard/34 only)
■
Smart Card
■
Bridge media slot
■
■
■
■
■
Additional memory module
User's Manual
This utility is able to either enable or disable the
USB Sleep and Charge function.
Shows the positions of USB ports that support
the USB Sleep and Charge function and displays
the battery's remaining capacity.
To start this utility, click Start -> All Programs ->
TOSHIBA -> Utilities -> USB Sleep and
Charge.
The TPM (Trusted Platform Module) is a security
encryption device for the hard disk drive.
BIOS setup and Infineon TPM Software
Professional Package must be configured in
order to use TPM.
Leading Innovation >>> screen appears.
Secure Digital™ (SD) Card (SD memory card, SDHC memory card,
miniSD Card, microSD Card)
Memory Stick (Memory Stick, Memory Stick PRO, Memory Stick
Duo, Memory Stick PRO Duo, Memory Stick Micro)
xD picture card
MultiMediaCard
Hardware, Utilities and Options
3-15