Toshiba Tecra M11 User Manual page 88
Satellite pro s500m series
Hide thumbs
Also See for Tecra M11:
- Maintenance manual (477 pages) ,
- User manual (253 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to
Replacing the battery pack
Modes, if required).
5. Loosen the screw securing the memory module cover in place - please
note that the screw is attached to the cover in order to prevent it from
being lost.
6. Slide your fingernail or a thin object under the cover and lift it off.
7. Push the latches away from the module in order to release it - a spring
will force one end of the module up at an angle.
8. Grasp the module by its edges and remove it from the computer.
■
If you use the computer for a long time, the memory modules and the
circuits locating close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them. Or
you will get burnt if you touch any of them.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
1. Latches
9. Seat the memory module cover in place and secure it with the screw.
Take care to ensure that the memory module cover is firmly closed.
10. Install the battery pack - refer to
Chapter 6, Power and Power-Up Modes, if required.
11. Turn your computer over.
User's Manual
section in Chapter 6, Power and Power-Up
Figure 3-11 Removing the memory module
Replacing the battery pack
Hardware, Utilities and Options
1
section in
3-27
Hide quick links:
Advertisement
Table of Contents
