ENGLISH SAFETY INFORMATION Before the installation and use of the appli- • The sides of the appliance must stay ad- ance, carefully read the supplied instruc- jacent to appliances or to units with the tions. The manufacturer is not responsible same height.
www.electrolux.com – be careful when you remove or install the accessories. WARNING! • Discoloration of the enamel has no effect Risk of injury, burns or electric on the performance of the appliance. It is shock or explosion. not a defect in the sense of the warranty law.
Page 5
ENGLISH DISPOSAL WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door catch to prevent chil- dren and pets to get closed in the appli- ance.
www.electrolux.com PRODUCT DESCRIPTION Control panel Electronic programmer Socket for the core temperature sen- Heating element Lamp Rear wall heating element Bottom heat Shelf support, removable Shelf positions ACCESSORIES Wire shelf For cookware, cake tins, roasts. Baking tray For cakes and biscuits. Grill- / Roasting pan To bake and roast or as a pan to collect fat.
ENGLISH BEFORE FIRST USE WARNING! Refer to "Safety information" chap- ter. INITIAL CLEANING AND PREHEATING • Remove all parts from the appliance. • Clean the appliance before first use. • Heat up the empty appliance at 150°C for 30 minutes with function Refer to chapter "Care and Clean- ing".
www.electrolux.com CONTROL PANEL ELECTRONIC PROGRAMMER Use the sensor fields to operate the appli- ance. Sensor Function Description Field DISPLAY Shows the current settings of the appli- ance. ON / OFF To activate and deactivate the appliance. Use it to access the heating functions. OPTIONS To set an automatic programme, cleaning function or a heating function.
Page 9
ENGLISH DISPLAY Heating function symbol Temperature / time display Clock / residual heat display (also Mi- nute Minder and Time of Day) Residual heat indicator Indicators for the clock functions (refer to the table "Clock functions" ) Heat-up indicator Number of a heating function / pro- gramme OTHER INDICATORS OF DISPLAY Symbols...
10 www.electrolux.com DAILY USE WARNING! • Automatic programmes - to prepare a Refer to "Safety information" chap- dish when you do not have knowledge ter. or experience in cooking. To operate the appliance you can use: • manual mode - to set a heating func- tion, the temperature and the cooking time manually.
ENGLISH When the appliance is at the set tempera- or you must use the clock functions ture, an acoustic signal sounds three times. (Duration, End, Time delay). The heat-up indicator goes off the display. – When the appliance is off, you can use the heat to keep food warm.
12 www.electrolux.com CLOCK FUNCTIONS SYM- FUNCTION DESCRIPTION TIME OF DAY To show the time of day. To change the time of day, re- fer to 'Setting the time of day'. DURATION To set how long the appliance operates. To set when the appliance deactivates. You can use Du- ration and End at the same time (Time delay) if you want the appliance to activate and deactivate automatically later.
Page 13
ENGLISH Touch a sensor field to stop the acous- tic signal. SETTING THE TIME DELAY FUNCTION DURATION and END can be used at the same time, if the appliance is to be switched on and off automatically later. In case first set the DURATION and then function (refer to "Setting the DU- RATION"...
14 www.electrolux.com AUTOMATIC PROGRAMMES WARNING! Touch or the settings save auto- Refer to "Safety information" chap- matically after five seconds. ter. The appliance starts. The display shows a symbol of the weight. During There are 9 automatic programmes this time you can change the default and recipes.
ENGLISH USING THE ACCESSORIES WARNING! Touch or the settings save auto- Refer to "Safety information" chap- matically after 5 seconds. ter. You can set the core temperature only when flashes. If is in CORE TEMPERATURE SENSOR the display but does not flash be- fore you set the core temperature, The core temperature sensor measures the core temperature of the meat.
16 www.electrolux.com When you cook with the core tem- • The current oven temperature perature sensor, you can change • The current core temperature the temperature shown in the Tem- The set core temperature changes into the perature / Time display. After you current core temperature and the current put the core temperature sensor in oven temperature changes into the set...
ENGLISH ADDITIONAL FUNCTIONS MY FAVOURITE PROGRAMME Touch and hold at the same time for 2 seconds. An acoustic FUNCTION signal sounds. SAFE comes on or goes out in the display. Use this function to save your favourite set- tings of temperature and time for a heating function or programme.
18 www.electrolux.com The display shows "SET1" and "1" AUTOMATIC SWITCH-OFF flashes. For safety reasons the appliance deacti- Touch to set the setting. vates automatically after some time: Touch • if a heating function operates. Touch to change the value of •...
ENGLISH CARE AND CLEANING WARNING! cleaning process (1 hour). You cannot Refer to "Safety information" chap- set the Duration, but you can use the ter. End function to delay start of cleaning process. Notes on cleaning: An acoustic signal operates after the •...
20 www.electrolux.com SHELF SUPPORTS Removing the shelf supports You can remove the shelf supports to clean the side walls. Pull the front of the shelf support away from the side wall. Pull the rear end of the shelf support away from the side wall and remove it. Valid for telescopic runners: The retaining pins on the telescopic Installing the shelf supports...
Page 21
ENGLISH Close the door until it is at an angle of approximately 45°. Hold the door with one hand on each side and pull it away from the appli- ance at an upwards angle. Put the door with the outer side 45°...
22 www.electrolux.com WHAT TO DO IF… WARNING! Refer to "Safety information" chap- ter. Problem Possible cause Solution The appliance does not The appliance is deactiva- Activate the appliance. heat up. ted. The appliance does not The time of day is not set. Set the clock.
24 www.electrolux.com INSTALLATION WARNING! The handle can be replaced to Refer to "Safety information" chap- match the décor of your kitchen. ter. The change must be done by an authorized person. Use only genu- ine replacement parts. min. 3 mm To lift the appliance, do not use the door handle.
ENGLISH Use a minimum of 2 screws to attach the oven on the 2 sides (Detail A). INSTALLING THE OVEN UNDER A WORK SURFACE Before the installation, connect the oven to the electrical supply. Refer to "Electrical connection". A = appliance N = recess ca.50 WARNING!
Page 26
26 www.electrolux.com Only a qualified person can con- 400V 3~ 400V 2~ nect the appliance to the electricity supply. L2 L3 Do the electrical connections as in the connection illustration. Phase definitions: L1, L2 (or R, S). Secure the cord grip. CAUTION! If service is required always discon- nect the appliance from the power...
Page 27
ENGLISH ELECTRICAL CONNECTION WITH THE HOB You can connect the oven to an independ- ent hob from the current range of Electro- lux and AEG hobs. You can purchase the necessary connection cable separately: • AK - EB/GKTC (S) 1 m for ceramic hobs. •...
28 www.electrolux.com GARANTIE, GARANZIA, GUARANTEE KUNDENDIENST, SERVICE-CLIENTÈLE, SERVIZIO CLIENTI, CUSTOMER SERVICE CENTRES Servicestellen Points de Service Servizio dopo Point of vendita Service 5506 Mägenwil/Zürich In- 3018 Bern Mor- 1028 Prévereng- 6916 Grancia dustriestrasse 10 genstrasse 131 es Le Trési 6 Zona Industri- ale E 9000 St.
ENGLISH ENVIRONMENT CONCERNS and electronic appliances. Do not dispose Recycle the materials with the symbol with appliances marked with the symbol Put the packaging in applicable containers to recycle it. the household waste. Return the product Help protect the environment and human to your local recycling facility or contact health and to recycle waste of electrical your municipal office.