Making Connections; Connecting Your Pc Or Macintosh Computer - NEC VE280X User Manual
Portable projector
Hide thumbs
Also See for VE280X:
- User manual (88 pages) ,
- Quick setup manual (6 pages) ,
- Quick setup manual (6 pages)
Table of Contents
Advertisement
Making Connections
Connecting Your PC or Macintosh Computer
NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode
and before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management
software.
Enabling the computer's external display
Displaying an image on the notebook PC's screen does not necessarily mean it outputs a signal to the projector.
When using a PC compatible laptop, a combination of function keys will enable/disable the external display.
Usually, the combination of the 'Fn" key along with one of the 12 function keys gets the external display to come on
or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through
external display selections.
VE280X/VE280
AUDIO IN
NOTE:
• Before connecting an audio cable to the headphone jack of a computer, adjust the computer's volume level to low. After connecting
the projector to the computer, adjust the volume of both projector and computer to suitable level as desired to avoid damage to
your ear.
• If an audio output jack of your computer is a mini jack type, connect the audio cable to it.
• An image may not be displayed correctly when a Video source is played back via a commercially available scan converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
- When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.
- The COMPUTER IN connector supports Plug & Play (DDC2B).
COMPUTER IN
AUDIO IN
Computer
cable
(VGA)
(supplied)
Stereo mini-plug audio cable
(not supplied)
NOTE: For older Macintosh,
use a commercially available
pin adapter (not supplied) to
connect to your Mac's video
port.
HDMI IN
COMPUTER IN
Computer cable (VGA)
(supplied)
To mini D-Sub 15-pin connector on the
projector. It is recommended that you
use a commercially available distribution
amplifier if connecting a signal cable
longer than the cable supplied.
Stereo mini-plug audio cable (not supplied)
12
2. Installation and Connections
VE281X/VE281/VE282X/VE282
HDMI cable (not supplied)
Use High Speed HDMI
®
Cable.
IBM VGA or Compatibles (Notebook
type) or Macintosh (Notebook type)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
