hit counter script
GE CV936 Owner's Manual & Installation Instructions
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Ventilation Hood
  5. Appliances CV936
  6. Owner's manual & installation instructions
GE CV936 Owner's Manual & Installation Instructions

GE CV936 Owner's Manual & Installation Instructions

Vented range hoods
Hide thumbs Also See for CV936:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Instructions & Owner's Manual
www.GEAppliances.ca
Safety Instructions
. . . . . . . . . 2, 3
Operating Instructions
Light Controls . . . . . . . . . . . . . . . .4
Vent Controls . . . . . . . . . . . . . . . .4
Grease Filters . . . . . . . . . . . . . . . .5
Hood Lights . . . . . . . . . . . . . . . . .6
Hood Surfaces . . . . . . . . . . . . . . . .5
Stainless Steel Surfaces . . . . . . . . .5
. . . . . . . .20
Consumer Support
Consumer Support . . . Back Cover
Product Registration . . . . . .21, 22
Warranty . . . . . . . . . . . . . . . . . . . 23
Write the model and serial
numbers here:
Model # ________________
Serial # ________________
You can find them on a label
on the inside of the hood.
. . .7-18
Owner's Manual and
Installation Instructions
JV936
CV936
350A4502P550 08-07 ATS

Advertisement

Table of Contents
loading

Related Manuals for GE CV936

Summary of Contents for GE CV936

  • Page 1: Table Of Contents

    Warranty ....23 Write the model and serial numbers here: Model # ________________ Serial # ________________ You can find them on a label on the inside of the hood. Owner’s Manual and Installation Instructions JV936 CV936 350A4502P550 08-07 ATS...

  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. SAFETY PRECAUTIONS WARNING – ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer. B.

  • Page 3: Read And Save These Instructions

    SAFETY PRECAUTIONS WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: A. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings. B.

  • Page 4: Light Controls

    Using the hood controls. Throughout this manual, features and appearance may vary from your model. FAN Control Turn the FAN speed control to LO, MED LO, MED HI or HI, as needed. Continuous use of the fan system while cooking helps keep the kitchen comfortable and less humid.

  • Page 5: Care And Cleaning

    Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood. If it ever becomes necessary to replace the metal grease filters, they may be ordered from your GE supplier. Heavy-duty commercial filters may also be used in place of the filters. For 30” (76.2 cm) hoods, order Kit no.

  • Page 6: Hood Lights

    Care and cleaning of the vent hood. Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood. Hood Lights Receptacle Socket NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.

  • Page 7: Installation Instructions

    Installation Instructions Questions? Call 1-800-561-3344 BEFORE YOU BEGIN Read these instructions completely and carefully. IMPORTANT – • instructions for local inspector’s use. IMPORTANT – • governing codes and ordinances. Note to Installer – • Be sure to leave these instructions with the Consumer. Note to Consumer –...

  • Page 8: Installation Clearances

    INSTALLATION CLEARANCES These vent hoods are designed to be installed onto a wall. They may be installed beneath a soffit or cabinet. • Install these hoods 24” Min. to 36” Max above the cooking surface. SOFFIT INSTALLATION SOFFIT 24" MIN. 36"...

  • Page 9: Advance Planning

    ADVANCE PLANNING Ductwork Planning • This hood may be vented vertically through upper cabinets, soffit or ceiling. A duct transition piece is supplied for vertical exhaust. Use locally supplied elbows to vent horizontally through the rear wall. See page 13. •...
  • Page 10 Round roof vent *Actual length of straight duct plus duct fitting equivalent. Equivalent length of duct pieces are based on actual tests conducted by GE Evaluation Engineering and reflect requirements for good venting performance with any ventilation hood. Total Equivalent...

  • Page 11: Tools And Materials Required

    TOOLS AND MATERIALS REQUIRED (NOT SUPPLIED) Pencil and Phillips and tape measure Flat blade screwdrivers Electric drill with 1/8” and 3/8” bits Spirit level Flashlight cUL Listed Wire nuts Pliers Hammer Wire Cutter/Stripper Saber saw or Key Hole Saw Ladder Additional Materials: •...

  • Page 12: Parts Provided

    Installation Instructions PARTS PROVIDED Locate the hardware accessory box packed with the hood and check contents. 2 Aluminum Grease Filters DUCT COVER REQUIREMENTS We recommend that the vent hood and decorative duct cover (if used) be on site before final framing and wall finishing.

  • Page 13: House Wiring Location

    DETERMINE HOOD, DUCTWORK AND WIRING LOCATIONS • Measure desired distance from the bottom of the hood to the cooking surface, 24” min. to 36” max. Refer to the previous page if the accessory duct cover will be used. • Use a level to draw a horizontal line indicating the bottom of the hood.
  • Page 14 INSTALL HOOD SUPPORT IMPORTANT: Framing must be capable of supporting 100 lbs (45.3 kg) • Locate at least 2 vertical studs at the wood mounting location by tapping drywall with a hammer or use a stud finder. • Center the supplied wood horizontal support, left to right and below the marked line.

  • Page 15: Install Hood To Soffit Or Beneath Cabinets

    Alternate Mounting Method INSTALL HOOD TO SOFFIT OR BENEATH CABINETS SKIP THIS STEP IF USING WALL MOUNTING METHOD IMPORTANT: Framing must be capable of supporting 100 lbs (45.3 kg) When necessary, the hood may be installed so that it is supported by the soffit.

  • Page 16: Connect Ductwork

    INSTALL CEILING BRACKET The ceiling bracket must be installed when the duct cover is used to span 24” or more height above the hood. The bracket will hold the decorative duct cover in place at the top. Note: The ceiling bracket is not required when using only the 12”...

  • Page 17: Install Duct Covers

    INSTALL MOTOR • Align and engage the Motor Attachment Bracket slots in the blower assembly to the 3 hooks at the rear of the exhaust opening. • Rotate motor upwards until it aligns with the attachment screw location. • Secure the motor to attachment bracket at the front of the opening with washer...
  • Page 18 INSTALL FILTERS • Remove protective film covering the filters. • Insert the filter into the “C” clips mounted to the top of the vertical front panel. • Tap the filter against one side to align with outside opening. • Pull the filter down into the lower slots at the bottom of the filter support.
  • Page 19 Notes. www.GEAppliances.ca...

  • Page 20: Troubleshooting Tips

    Before you call for service… Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. Problem Possible Causes Fan does not operate A fuse may be blown or a when the switch is on circuit breaker tripped.

  • Page 21: Product Registration

    Please place in envelope and mail to: Veuillez mettre dans une enveloppe et envoyez à : OWNERSHIP REGISTRATION P.O. BOX 1780 MISSISSAUGA, ONTARIO L4Y 4G1 (FOR CANADIAN CONSUMERS ONLY - POUR RÉSIDENTS CANADIENS SEULEMENT)
  • Page 22 For Canadian Customers Pour les consommateurs canadiens OWNERSHIP REGISTRATION CERTIFICATE – FICHE D’INSCRIPTION DU PROPRIÉTAIRE Please register your product to enable us to contact you in the remote event a safety notice is issued for this product and to allow for efficient communication under the terms of our warranty, should the need arise.
  • Page 23 Range Hood Warranty. All warranty service provided by our Factory Service Centers, or an authorized Customer Care on-line, 24 hours a day, visit us at www.GEAppliances.ca, or call 1.800.561.3344. For The Period Of: Mabe Will Replace: One Year Any part of the range hood which fails due to a defect in materials or workmanship. From the date of the During this full one-year warranty, Mabe will also provide, free of charge, all labor and original purchase...

  • Page 24: Consumer Support

    Consumer Support. GE Appliances Website Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day, any day of the year! For greater convenience and faster service, you can now download Owner’s Manuals, order parts or even schedule service on-line.

This manual is also suitable for:

Jv936

Table of Contents

Save PDF