Seal The Openings - GE JGB281 Owner's Manual & Installation Instructions
Self-cleaning gas ranges
Hide thumbs
Also See for JGB281:
- Owner's manual and installation instructions (208 pages) ,
- Owner's manual & installation instructions (52 pages) ,
- Owner's manual & installation instructions (52 pages)
Table of Contents
Advertisement
3
ELECTRICAL CoNNECTIoNS
B. Usage Situations where Appliance Power Cord will
Be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the 2-prong
wall receptacle replaced with a 3-prong (grounding)
receptacle by a qualified electrician before using the
appliance.
The installation of appliances designed for mobile
home installation must conform with the Manufactured
Home Construction and Safety Standard, Title 24 CFR,
Part 3280 (formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or,
when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-Ups),
ANSI A225.1, latest edition, or with local codes. In Canada,
mobile home installation must be in accordance with the
current CAN/CSA Z240/MH Mobile Home Installation Code.
Electric Disconnect
n Locate disconnect plug on the range back.
n Pinch sides of connector and pull out of range back.
SEAL THE oPENINGS
4
Seal any openings in the wall behind the range and
in the floor under the range when hookups are completed.
Installation Instructions
(CoNT.)
42
5
CHECK oPERATIoN oF SURFACE
BURNERS
Operation of all cooktop and oven burners should be checked
after the range and gas supply lines have been carefully
checked for leaks.
Lighting the Burners
Select a top burner knob and simultaneously push in and turn
to LITE position. You will hear a clicking sound indicating proper
operation of the spark module. Once the air has been purged
from the supply lines, burners should light within 4 seconds.
After burner lights, rotate knob out of the LITE position. Try
each burner in succession until all burners have been checked.
quality of Flames
The combustion quality of burner flames needs to be
determined visually.
If burner flames look like (A), call for service. Normal burner
flames should look like (B) or (C), depending on the type of gas
you use.
With LP gas, some yellow tipping on outer cones is normal.
CHECK oPERATIoN oF oVEN BURNERS
6
A. Remove oven bottom:
Remove the 2 screws at the rear of the oven bottom.
n
n
Grasp the oven bottom at slots on each side.
n
Lift the rear enough to clear the lip of the range frame,
push it back, and then pull it up and out.
Call for service
Normal for LP gas
Normal
for natural gas
Hide quick links:
Advertisement
Table of Contents
