Panasonic TH-47LFX6U Operating Instructions Manual
Full hd lcd display
Hide thumbs
Also See for TH-47LFX6U:
- Operating instructions manual (71 pages) ,
- Service manual (50 pages)
Related Manuals for Panasonic TH-47LFX6U
Summary of Contents for Panasonic TH-47LFX6U
- Page 1 Model No. TH-47LFX6U TH-47LFX6W Operating Instructions (Details) FULL HD LCD Display Please read these instructions before operating your set English and retain them for future reference.
- Page 2 Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.
-
Page 3: Precautions For Installation
Precautions for Installation • Do not install by yourself. Please ask a installation professional or your dealer to install. • This product corresponds to IP44 dust and water protection standard. Do not change or damage dust or water resistance of the product. •... -
Page 4: Installation Conditions
• When an abnormality or fault such as loose screw is detected, ask an installation professional or your dealer immediately for repair. • Panasonic will not be responsible for any damages from an accident such as defect of installation, improper use, modifi cation, or natural disaster. - Page 5 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a t r i a n g l e i s i n t e n d e d t o is in tend ed to tell the user...
-
Page 6: Important Safety Instructions
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Clean only with dry cloth. 6) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi... -
Page 7: Fcc Statement
Any changes or modifi cations not expressly approved by Panasonic Corp. of North America could void the user's authority to operate this device. -
Page 8: Important Safety Notice
If the plug contains a removable fuse cover, you must ensure that it is refi tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug. -
Page 9: Table Of Contents
Table of Contents Precautions for Installation ........iii Customizing the Input labels ......... 35 Important Safety Instructions ......... vi Selecting the On-Screen Menu Language .... 36 FCC STATEMENT ............ vii Customizing the On-Screen Menu Display ..36 Important Safety Notice ........viii Setup for MULTI DISPLAY ........ -
Page 10: Safety Precautions
• The Display may fall off or tip over. Do not place any objects on top of the Display. • If any foreign objects get inside the Display, please consult your local Panasonic dealer. Transport only in upright position! • Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry. - Page 11 If foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately. • A short circuit may occur, which could cause fi re. Contact your local Panasonic dealer for any repairs that need to be made.
-
Page 12: Cleaning And Maintenance
Safety Precautions CAUTION When using the LCD Display Be sure to disconnect all cables before moving the Display. • If the Display is moved while some of the cables are still connected, the cables may become damaged, and fi re or electric shock could result. - Page 13 Safety Precautions Maintaining air fi lters The cooling structure of the Display is designed to circulate air taken in from outside inside the Display using fans. Air fi lters are built into the inlet and outlet. When “Filter” is displayed on the screen as you turn on the power, or when the power indicator is blinking green and orange alternately, there is accumulated dust on the air fi...
-
Page 14: Accessories
Main plug types vary between countries. Make sure to use the power supply cord with the voltage and shape appropriate to your country and region. (see page 8) Panasonic badge An installation professional or service provider will Used by a service provider attach it to the Display frame at the time of installation. -
Page 15: Remote Control Batteries
Accessories Remote Control Batteries Requires two R6 batteries. 2. Insert batteries - note correct 3. Replace the cover. 1. Pull and hold the hook, then open polarity ( + and -). the battery cover. “R6 (UM3, AA)” size Helpful Hint: For frequent remote control users, replace old batteries with Alkaline batteries for longer life. -
Page 16: About Power Supply Cord
About Power Supply Cord Main plug types vary between countries. Check the shape of the power plugs to choose the appropriate cable for you. Country name and applicable model name Appropriate AC Cables TH-47LFX6U: Asia India Cable A Indonesia Cable B or Cable C... -
Page 17: Connections
Connections How to remove terminal cover A terminal cover is attached to the input and output terminals to protect them from dust and water. To remove the terminal cover to connect a cable or other item, remove all 12 screws from the terminal cover. Opening the terminal cover with some screws left on will damage the terminal cover. -
Page 18: Video Equipment Connection
Connections Video equipment connection Remove the terminal cover (see page 9) LAN, DIGITAL LINK* Connect to a DIGITAL LINK input terminal network to control the Display. Alternatively, connect to a device that sends video and audio signals via the DVI-D IN DIGITAL LINK terminal. -
Page 19: Audio Out Connection
Connections AUDIO OUT connection Note: Additional equipment and cables shown are not supplied with this set. Stereophonic sound code audio equipment line-in HDMI connection [Pin assignments and signal names] DVD player Pin No. Signal Name Pin No. Signal Name T.M.D.S Clock T.M.D.S Data2+ Shield HDMI... -
Page 20: Dvi-D In Connection
Connections DVI-D IN connection PC with DVI-D video out Less than Less than 1.97 inch 1.97 inch Ferrite core (5 cm) (5 cm) (supplied) Shared with PC IN. DVI-video cable (Within 5 m) Stereo mini plug (M3) Installing the Ferrite core Pull back the tabs Open the Route the... -
Page 21: Pc Input Terminals Connection
Connections PC Input Terminals connection (Female) Conversion adapter (if necessary) Mini D-sub 15p COMPUTER Shared with (Male) DVI-D IN. Connect a cable which matches the audio output terminal on the computer. Audio Stereo mini plug (M3) Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. -
Page 22: Serial Terminals Connection
Connections SERIAL Terminals connection The SERIAL terminal is used when the Display is controlled by a computer. COMPUTER Pin layout for SERIAL Terminal RS-232C Straight cable (Female) (Male) D-sub 9p Notes: • Use the RS-232C straight cable to connect the computer to the Display. •... -
Page 23: Example Connection Using The Digital Link Terminal
Display via the DIGITAL LINK terminal. Display Connection Terminals Control Computer When a Panasonic ET-YFB100 is used Video Cassette Recorder DVD Player Computer Notes: • When connecting with DIGITAL LINK, be sure to confi gure each of the “Network Setup” settings. (see page 43-45) •... -
Page 24: Power On / Off
Power On / Off Connecting the AC cord plug to the Display. Remove the terminal cover (See page 9) Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type fi... -
Page 25: Outdoor Mode
Power On / Off When fi rst switching on the unit Following screen will be displayed when the unit is turned on for the fi rst time. Select the items with the remote control. Unit buttons are invalid. OSD Language English (UK) OSD Language Deutsch... -
Page 26: Selecting The Input Signal
Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Display. Input signals will change as follows: DIGITAL LINK HDMI HDMI: HDMI input terminal in AV IN (HDMI). PC: PC input terminal in PC IN. -
Page 27: Basic Controls
Basic Controls Main Unit Power Indicator The Power Indicator will light. • Power-OFF ..Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ..Red Orange (When the control terminal selection is “LAN”... -
Page 28: Remote Control Transmitter
Basic Controls Remote Control Transmitter OFF TIMER button The Display can be preset to switch to stand-by after a fi xed period. The setting changes to 30 ACTION button minutes, 60 minutes, 90 minutes and 0 minutes Press to make selections. (off timer cancelled) each time the button is pressed. -
Page 29: Aspect Controls
ASPECT Controls The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Note: Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture, you may be violating the copyright under copyright law. -
Page 30: Digital Zoom
Digital Zoom This displays an enlargement of the designated part of the displayed image. Display the operation guide. Exit Press to access Digital Zoom. The operation guide will be displayed. During Digital Zoom, only the following buttons can be operated. [Remote control] POSITION / ACTION button... -
Page 31: On-Screen Menu Displays
On-Screen Menu Displays Remote Control Unit Display the menu screen. Press several times. Press to select. (Example: Picture menu) Each time the MENU button is pressed, the menu screen will switch. Normal Viewing Picture Sound Pos. /Size Setup Select the item. Select. -
Page 32: Adjusting Pos. /Size
Adjusting Pos. /Size Pos. /Size Press to display the Pos. /Size menu. Normalise Normal Auto Setup Press to select the menu to adjust. H-Pos H-Size V-Pos V-Size Clock Phase Dot Clock Press to adjust the menu. 1:1 Pixel Mode Notes: Unadjustable items are grayed out. - Page 33 Adjusting POS. /SIZE H-Pos Adjust the horizontal position. V-Pos Adjust the vertical position. H-Size Adjust the horizontal size. V-Size Adjust the vertical size. Clock (During PC input signal) Phase Eliminate the fl ickering and distortion. Dot Clock (During PC input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed.
-
Page 34: Picture Adjustments
Picture Adjustments Press to display the Picture menu. Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. -
Page 35: Advanced Settings
Picture Adjustments Notes: Item Effect Adjustments • You can change the level of each function Adjusts luminance of the back (Backlight, Contrast, Brightness, Sharpness) Backlight light. Darker Brighter for each Picture Mode. • The setting details for normal, dynamic Selects the proper brightness and cinema respectively are memorized Contrast* and density for the room. -
Page 36: Sound Adjustment
Sound Adjustment Sound Press to display the Sound menu. Normalise Normal Sound Mode Normal Select to adjust each item. Bass Treble Press to select the menu to adjust. Balance Surround Select the desired level by listening to the sound. Press to exit from adjust mode. Item Details Normal*... -
Page 37: Present Time Setup / Set Up Timer
PRESENT TIME Setup / Set up TIMER The timer can switch the Display On or Off. Before attempting Timer Set, confi rm the PRESENT TIME and adjust if necessary. Then set POWER ON Time / POWER OFF Time. Setup Press to display the Setup menu. MULTI DISPLAY Setup Press to select Set up TIMER or PRESENT TIME Setup. -
Page 38: Set Up Timer
PRESENT TIME Setup / Setup TIMER Set up TIMER Set the program for turning the power On/Off and select the input signal at the specifi ed time. Up to 20 programs can be set. [Setting Example] Program 1, Every Monday, 12:00, Power On, Input: HDMI Set up TIMER PRESENT TIME MON 0 : 03 Set the program number. -
Page 39: Screensaver (For Preventing Image Retention)
Screensaver (For preventing image retention) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used. When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each. Black→Dark Gray→Gray→Light Gray→White Setup Press to display the Setup menu. -
Page 40: Setup Of Screensaver Time
Screensaver (For preventing image retention) Setup of Screensaver Time After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.) Press to select Start Time / Finish Time Screensaver (When Time Designation is selected). -
Page 41: No Activity Power Off
No activity power off Press to select the menu to adjust. Setup Signal Screensaver Input label ECO Mode settings Wobbling YUV/RGB-in select No activity power off Press to select “Enable” or “Disable”. Disable English ( UK ) OSD Language Press to exit from Setup. When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of the Display for 4 hours. -
Page 42: Eco Mode Settings
ECO Mode settings Setup ECO Mode settings Signal select Screensaver ECO Mode Custom Input label adjust ECO Mode settings No signal power off Wobbling Disable PC Power management YUV/RGB-in select DVI-D Power management No activity power off Disable Power save English ( UK ) OSD Language ECO Mode... -
Page 43: Customizing The Input Labels
Customizing the Input labels This function can change the label of the Input signal to be displayed. (see page 18) Setup Press to display the Setup menu. Signal Screensaver Input label Press to select Input label. ECO Mode settings Wobbling YUV/RGB-in select Press to display the Input label screen. -
Page 44: Selecting The On-Screen Menu Language
Selecting the On-Screen Menu Language Press to display the Setup menu. Press to select the OSD Language. Press to select your preferred language. Selectable languages Setup English (UK) Signal Screensaver Deutsch Input label ECO Mode settings Français Wobbling YUV/RGB-in select Italiano No activity power off Disable... -
Page 45: Setup For Multi Display
Setup for MULTI DISPLAY By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each display has to be set up with a Display number to determine its location. (Example) group of 4 (2 ×... -
Page 46: Id Remote Control Function
Setup for MULTI DISPLAY Item Details Select the required arrangement number. (A1-E5 : Refer to the following) Display Number locations for each arrangement. (Examples) ( 2 × 1) ( 2 × 3 ) ( 4 × 2 ) ( 4 × 4 ) ( 5 ×... -
Page 47: Setup For Input Signals
Setup for Input Signals YUV / RGB-in select Select to match the signals from the source connected to DVI-D IN terminal. YUV signals “YUV” RGB signals “RGB” Press to display the Setup menu. Setup Signal Press to select the “YUV / RGB-in select”. Screensaver Input label ECO Mode settings... -
Page 48: Cinema Reality
Setup for Input Signals Cinema reality* Cinema reality*: When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to off. Press to select Cinema reality*. -
Page 49: Hdmi Range
Setup for Input Signals HDMI Range Switches the dynamic range according to the input signal from HDMI terminal. Press to select “HDMI Range”. [ Digital ] Signal Press to select “Video(16-235)”, “Full(0-255)”, “Auto”. Cinema reality HDMI Range Auto Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer Auto: Switches the dynamic range automatically between “Video(16-235)”... -
Page 50: Maintenance Information
Maintenance information Maintenance information related to the fan and air fi lter is displayed. Maintenance information Setup Maintenance information Fan inspection required. MULTI DISPLAY Setup Please contact service provider. Set up TIMER PRESENT TIME Setup Press Network Setup No.1 No.2 Menu Display Duration 15 S No.3... -
Page 51: Network Setup
Network Setup Confi gure the various settings required to use the network function. Network Setup Setup Network Setup MULTI DISPLAY Setup DIGITAL LINK mode Auto AMX D.D. Set up TIMER Press Control l/F Select Crestron Connected™ PRESENT TIME Setup RS232C (Serial) Extron XTP Network Setup Display name... - Page 52 Network Setup LAN Setup Detailed network settings for the LAN established via the LAN terminal of the Display or twisted pair cable transmitter can be confi gured. DHCP, IP address, Subnet mask, and Gateway settings Select “LAN Setup” and press Set DHCP.
- Page 53 Network Setup DIGITAL LINK status Display the DIGITAL LINK connection environment. DIGITAL LINK status LINK status No Link Select “DIGITAL LINK status” and press HDMI status No HDMI Signal quality -XX dB -YY dB LINK status : Either “No link”, “DIGITAL LINK”, or “Ethernet” will be displayed. No link : No LAN connection, etc.
-
Page 54: Options Adjustments
Options Adjustments Options Press to display the Setup menu. Input Search On screen display Press to select “OSD Language”. Initial input Initial VOL level Maximum VOL level Input lock Button lock Press for more than 3 seconds. Remocon User level Press to select “Options”. - Page 55 Options Adjustments Item Adjustments MENU&ENTER Off: All the buttons on main unit can be used. MENU&ENTER: Locks buttons on main unit. MENU On: Locks all the button on main unit except the Power switch. Button lock Sets Button lock with the unit buttons in the following procedure. Off: Press four times→Press four times→Press...
-
Page 56: Input Search
On: Power switch operation is disabled. Power Switch Lock Off: Power switch operation is enabled. Note: This function is only for TH-47LFX6U. Normalisation When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID”... -
Page 57: Using Network Function
Using Network Function Network Connection This unit has a network function to control the network connected display with your computer. Note: To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 43) When “LAN”... -
Page 58: Digital Link Connections (Connecting With A Twisted Pair Cable Transmitter)
Do not pull cables hard. Also avoid forcefully bending or folding them. ● Other This device is compatible with our Digital Interface Box (ET-YFB100). For the twisted pair cable transmitter ● of the other maker, refer to the following URL. (http://panasonic.net/prodisplays/products/47lfx6/index.html) -
Page 59: Command Control
Commands used in the serial control are supported. (see page 14) Note: Consult your local Panasonic dealer for detail instructions on command usage. PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™... -
Page 60: Using Web Browser Control
The password can be changed on the Password ● Setup screen after logging in (see page 54). The user name cannot be changed. Under no circumstances, Panasonic Corporation ● or it's associated companies will ask customers their password directly. Even if you are asked directly, please do not reveal your password. -
Page 61: Display Control (Basic Control/Option Control Screen)
Using Web Browser Control TOP screen structure of the Web browser control After logging in, the TOP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item Details BASIC... -
Page 62: Network Setting (Network Setting Screen)
Enter the old password. PASSWORD Enter the new password. PASSWORD Notes: Enter the password entered in “NEW • The default password is “Panasonic”. PASSWORD PASSWORD” for confi rmation. • Up to 32 alphanumeric characters can be used for a (RETYPE) password. -
Page 63: Crestron Connected™ Page
Using Web Browser Control Crestron Connected™ page You can monitor or control the Display using Crestron Connected™. When you click [Crestron Connected™], the Crestron Connected™ operation page is displayed. If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does not appear. - Page 64 Using Web Browser Control Info page Click Info on the operation page. 1 Display name Displays the name of the Display. 2 Mac Address Displays the MAC address. 3 Resolution Displays the resolution of the Display. 4 Power Status Displays the status of the power. 5 Source Displays the selected video input.
-
Page 65: Troubleshooting
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Electrical Appliances Interference Noisy Sound Cars / Motorcycles Fluorescent light Volume Normal Picture No Sound (Check whether the mute function has been activated on the remote control.) Not plugged into AC outlet Not switched on No Picture... - Page 66 Troubleshooting LCD Display panel Symptoms Check The screen darkens slightly The screen will darken slightly when photos, still images of a computer or other pictures with minimal when bright pictures with minimal movements are shown for an extended period. This is done to reduce image retention on the screen movements are shown.
-
Page 67: Applicable Input Signals
Applicable Input Signals PC signals Mark: Applicable input signal Horizontal Vertical frequency PC IN DVI-D IN Signal name HDMI frequency (kHz) (Hz) (Dot clock (MHz)) (Dot clock (MHz)) 640x400@70Hz 31.46 70.07 * (25.17) 640x480@60Hz 31.47 59.94 * (25.18) * (25.18) 640x480@72Hz 37.86 72.81... -
Page 68: Shipping Condition
Shipping condition This function allows you to reset the unit to the factory setting. Setup Press to display the Setup menu. Signal Screensaver Input label Press to select “OSD Language”. ECO Mode settings Wobbling YUV/RGB-in select No activity power off Press for more than 3 seconds. -
Page 69: Specifi Cations
Specifi cations TH-47LFX6U TH-47LFX6W Power Source 110 - 127 V AC, 220 - 240 V AC, 50/60 Hz 50/60 Hz Power Consumption Power on 370 W Power off condition 0.3 W Stand-by condition 0.5 W Outdoor mode On: 41 W... - Page 70 <Software Information for This Product> This product has software installed partially licensed under the Free BSD LICENSE. Free BSD LICENSE regulations under the above specifications are as follows: (These regulations are set by the third party; therefore the original (English) regulations are stated.) Copyright ©...
- Page 71 Mississauga, Ontario L4W 2T3 For TH-47LFX6W Pursuant to the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R. Germany Web Site : http://panasonic.net © M0413-2063 Panasonic Corporation 2013...