Epson PowerLite Home Cinema 725HD Quick Setup
Quick setup and warranty
Hide thumbs
Also See for PowerLite Home Cinema 725HD:
- Operation manual (109 pages) ,
- User manual (204 pages)
Advertisement
Quick Links
PowerLite
Home Cinema 725HD/730HD
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Video device
Connect up to 4 video devices and use the Source Search button on the
projector or remote control to switch between them.
Computer
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Note: For information on connecting the projector to your computer or other
devices (camera, USB flash drive, etc.), see the online User's Guide.
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a connected
video source (DVD player, streaming device, etc.) using an HDMI cable. If you
do not use an HDMI connection, you must connect your device's audio output
to the projector's audio input.
External speakers
Connect your device's audio output to your home theater receiver or powered
speakers.
Note: If you are using an HDMI connection to the projector, you may need to
reduce the projector speaker volume to zero (0), or make sure that the correct
audio output is selected on your device.
S-Video cable
Component video
to VGA cable
HDMI cable
RCA video cable
(composite video)
HDMI cable
Audio cable
Home theater system
Video source
Surround sound
Receiver
Powered speakers
External speakers
Video source
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
4
Press the
power button. The projector beeps, the Status light flashes
blue, and then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
Video cable
Projector
Video cable
Projector
power light on the projector turns blue.
power button twice, then
Advertisement
Related Manuals for Epson PowerLite Home Cinema 725HD
Summary of Contents for Epson PowerLite Home Cinema 725HD
-
Page 1: Quick Setup
PowerLite Home Cinema 725HD/730HD ® Quick Setup Home theater system Before using the projector, make sure you read the safety instructions in the Video source online User’s Guide. Connect the projector Video cable Choose from the following connections. See the sections below or the online Surround sound Receiver Projector... -
Page 2: Using The Remote Control
Using the remote control The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press Enter. Select Language and press Enter. Make sure the batteries are installed as shown (two AA batteries). Select your language and press Enter. -
Page 3: Where To Get Help
Epson will pay Notices for all freight charges if you choose to send your unit to Epson for repair. If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred. - Page 4 EPSON and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark and Epson Connection is a service mark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.