Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Advertisement
Table of Contents
Related Manuals for Sharp Notevision PG-M20X
Summary of Contents for Sharp Notevision PG-M20X
- Page 1 OPERATION MANUAL MODEL PG-M20X DIGITAL MULTIMEDIA PROJECTOR...
- Page 2 IMPORTANT For your assistance in reporting the loss or theft of your Model No.: PG-M20X Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that Serial No.: you have checked the contents of the carton thoroughly against the list of “Supplied accessories”...
- Page 3 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
- Page 4 The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese (Traditional Chinese and Simplified Chinese), Korean and Arabic. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch, Niederländisch, Portugiesisch, Chinese (Traditionelles Chinesisch und einfaches Chinesisch), Koreanisch und Arabisch.
- Page 5 2. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.
-
Page 6: Product Disposal
L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE. NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-PGM20X//1. RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX. ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN. -
Page 7: Outstanding Features
Outstanding Features 1. Image Quality • Superior image quality with Fujinon™ optical lens system • Newly developed DDR (Double Data Rate) chip eliminates Color Break- ing phenomena common with previous generation DLP™ projectors. • Newly developed 12° DMD™ chip provides significantly improved opti- cal efficiency and excellent contrast ratio. -
Page 8: Table Of Contents
Contents Introduction Adjusting the Picture ........40 Adjusting Image Preferences ........40 Outstanding Features ......... 3 Selecting the Signal Type ........40 Contents ............... 4 Progressive Mode ............ 41 IMPORTANT SAFEGUARDS ....... 6 Adjusting Computer Images ......42 How to Access the PDF Operation Manuals ..9 When Auto Sync is OFF ........... - Page 9 Removing and Installing the Lamp Unit ....72 Resetting the Lamp Timer ........73 Connecting Pin Assignments ......74 Computer Compatibility Chart ......75 Troubleshooting ..........76 For SHARP Assistance ........78 Specifications ............ 79 Dimensions ............80 Glossary ............. 81 Index ..............82...
-
Page 10: Important Safeguards
IMPORTANT SAFEGUARDS CAUTION : Please read all of these instructions before you operate this product and save these instructions for later use. Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. - Page 11 IMPORTANT READ BEFORE USING THE PRODUCT • You have acquired a product that includes software licensed to SHARP Corporation by Lineo, Inc. (“Lineo”). The Software is protected by copyright laws, international copyright treaties, and other intellectual prop- erty laws and treaties. Lineo and its suppliers retain all ownership of, and intellectual property rights in...
-
Page 12: Be Sure To Read The Following Safeguards When Setting Up Your Projector
I For minimal servicing and to maintain high image qual- Cautions regarding the transportation of the pro- ity, SHARP recommends that this projector be installed jector in an area free from humidity, dust and cigarette smoke. -
Page 13: How To Access The Pdf Operation Manuals
How to Access the PDF Operation Manuals PDF operation manuals in several languages are included in the CD-ROM. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can download it from the Internet (http:// www.adobe.com) or install it from the CD-ROM. -
Page 14: Part Names
Part Names Projector (Front and Top View) TEMPERATURE LAMP REPLACEMENT WARNING indicator indicator Illuminates in green Illuminates in green normally. normally. When the Replace the lamp when the internal temperature indicator illuminates in red. rises, this indicator will POWER indicator illuminate in red. -
Page 15: Projector (Side View)
Projector (Side View) USB terminal INPUT 1 terminal For connecting a compu- Port for DVI digital, computer RGB, and COMPONENT ter using a USB cable. signals. INPUT AUDIO terminal INPUT 2 terminal Shared audio terminal for Terminal for connecting video INPUT 1, INPUT 2, and equipment with an S-VIDEO INPUT 3. -
Page 16: Remote Control
Part Names (cont.) Remote Control Remote control signal transmitter FORWARD/BACK button POWER button Moves forward or backwards Turns the power on or off. when connected to a computer using a USB cable. Same as the ENLARGE (Enlarge/Reduce) [Page Down] and [Page Up] buttons keys on a computer keyboard. -
Page 17: Using The Remote Control
Using the Remote Control Available Range of the Remote Control I The remote control can be used to control the projector within the ranges shown in the illustration. Note Remote • The signal from the remote control can be reflected off a screen control 45°... -
Page 18: Accessories
If you cannot connect after changing computer ports, be sure to check you computer’s specifications. If you are still having difficulty connecting, a conversion connector (commercially available) may be necessary. • All cables may not be available in all regions. Please check with your nearest Sharp Authorized Note Projector Dealer or Service Center. -
Page 19: Setup And Connections
Setup and Connections... -
Page 20: Setup
Setup Foot releases Adjustment feet Using the Adjustment Feet The height of the projector can be adjusted using the adjustment feet when the surface of the projector is placed on is uneven or when the screen is slanted. The projection of the image can be made higher by adjusting the projector when it is in a location lower than the screen. -
Page 21: Setting Up The Screen
Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult. -
Page 22: Screen Size And Projection Distance
Setup (cont.) Screen Size and Projection Distance Screen Base line: Horizontal line passing through the lens center. Lens center 90° L:Projection distance NORMAL Mode (4:3) Distance from the lens Picture (Screen) size Projection distance (L) center to the bottom The formula for picture size and Diag. -
Page 23: Projecting A Reversed/Inverted Image
The image is reversed. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount When using the default setting. MOn-screen Display bracket for this installation. -
Page 24: Connecting The Projector To Other Devices
Connecting the Projector to Other Devices Before Connecting Note • Before connecting, be sure to turn off both the projector and the devices to be connected. After making all connections, turn on the projector and then the other devices. When connecting a computer, be sure that it is the last device to be turned on after all the connections are made. -
Page 25: Connecting The Projector To A Computer
ø3.5 mm stereo audio ø3.5 mm stereo audio cable (commercially available or cable (commercially available available as Sharp service or available as Sharp service part QCNW-4870CEZZ) part QCNW-4870CEZZ). DVI to 15-pin D-sub cable Note • See page “Computer Compatibility... - Page 26 ø3.5 mm stereo audio ø3.5 mm stereo audio cable cable (commercially available (commercially DVI cable or available as Sharp service available or available (sold separately) as Sharp service part part QCNW-4870CEZZ). QCNW-4870CEZZ) Note •...
-
Page 27: Connecting To Video Equipment
Connecting to Video Equipment 3RCA to 15-pin Connecting to D-sub cable Component Video Type: AN-C3CP (9'10" (3.0 m)) Optional Equipment accessories DVI to 15-pin Use a 3 RCA to 15-pin D-sub cable and DVI to D-sub adaptor 15-pin D-sub adaptor when connecting to the Model: AN-A1DV INPUT 1 terminal, component video equipment (7.9"... - Page 28 Connecting the Projector to Other Devices (cont.) Connecting to Video Equipment Using an S-VIDEO, a Composite To S-VIDEO output terminal Video or an Audio Cable To video output terminal Using an S-VIDEO, video, or audio cable, a VCR, To audio output terminal laser disc player or other audio-visual equipment can be connected to INPUT 2, IN- VCR or other audio-visual equipment...
-
Page 29: Connecting To A Monitor
Connecting to a Monitor RGB monitor loop-out Watching Images on Optional adaptor Type: AN-A1MY accessory Both the Projector and (7.9" (20 cm)) a Monitor You can display computer images on both the projector and a separate monitor using an RGB To RGB input port monitor loop-out adaptor and an RGB cable. -
Page 30: Using The Wireless Presentation Function Of The Remote Control
Connecting the Projector to Other Devices (cont.) Using the Wireless Presentation Function of the Remote Control The Wireless Presentation function on the projector works the same as the [Page Up] and [Page Down] keys on a computer keyboard. It can also be used to move forward or backward when viewing images of presentation software such as Power Point Using the Wireless Pre- Supplied... -
Page 31: Basic Operation
Basic Operation... -
Page 32: Image Projection
Image Projection MProjector indicators LAMP REPLACEMENT indicator Basic Procedure POWER indicator Connect the required external equipment to the projector before operating the following procedures. The language preset at the factory is English. If you want to change the on-screen display to another language, reset the language ac- cording to the procedure on page 30. - Page 33 "On-screen Display (Example) Press on the INPUT 1 Mode remote control to select the INPUT Mode. Using DVI digital • Pressing on the projector switches the inputs in the following order: ¡ INPUT 1 ¡ INPUT 2 ¡ INPUT 3 Using Analog Note Using...
-
Page 34: Selecting The On-Screen Display Language
Image Projection (cont.) Press to temporarily turn off the picture and sound. AV MUTE button Note • Pressing POWER again will turn the pic- ture and the sound back on. button Press , then press again while the confirmation message is displayed, to turn off the pro- jector. -
Page 35: Adjusting The Lens
Press to select the desired language, and then press Press • The desired language will be set as the on-screen display. Zoom knob Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. -
Page 36: Correcting The Trapezoidal Distortion (Keystone Correction)
Correcting the Trapezoidal Distortion (Keystone Correction) Correcting the Trap- ezoidal Distortion LENS button This function allows for Keystone (On-screen Trapezoidal Distortion) Correction. ENTER button Note buttons • Keystone Correction is the correction for UNDO button trapezoidal distortion that occurs when the image is positioned away from the center axis of the screen. - Page 37 For easier viewing, this function shifts the entire image projected on Digital Shift Setting the screen up or down when projecting 16:9 images from DVD players and DTV* decoders. * DTV is the umbrella term used to describe the new digital television system in the United States.
-
Page 38: Menu Bar Items
“Fine Sync” only “Signal Info”, “Auto Sync” and “Auto Sync Disp” can be used. • When the signal type is set as “Component”, in the “Picture” menu of INPUT 1 “Color”, “Tint” and “Sharp” are displayed. - Page 39 Page Page Bright Break Timer –30 PRJ Mode Color –30 Front Ceiling + Front Tint –30 Rear Ceiling + Rear Sharp –30 Keylock Level Normal –30 Level A Level B Blue –30 CLR Temp –3 Password Old Password New Password...
-
Page 40: Using The Menu Screen
Using the Menu Screen This projector has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following proce- dure. On-screen menu for INPUT 2 or INPUT 3 Mode On-screen menu for INPUT 1 RGB mode Menu Bar... - Page 41 Press to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages and 35. Press to select the item you want to adjust. Note • To display a single adjustment item, press after selecting the item.
-
Page 42: Basic Operations (Settings)
Using the Menu Screen (cont.) MENU button Basic Operations buttons (Settings) Press Note • The “Picture” menu screen for the selected input mode is displayed. • The on-screen display shown on the right is displayed when the INPUT 1 ENTER button mode is selected. - Page 43 Press • The cursor shifts to the sub menu. Sub menu Press to select the setting of the item displayed in the sub menu. Press • The item selected is set. Note • Some adjustment items will display a confirmation message. When setting an item, press to select “Yes”...
-
Page 44: Adjusting The Picture
Preferences Adjust the Picture menu➝ For adjustments, see page 36. Note • “Color”, “Tint” and “Sharp” are not dis- played when selecting INPUT 1 and the “Signal Type” is “RGB” . • The picture adjustments can be stored separately in each input mode. -
Page 45: Progressive Mode
Progressive Mode This function allows you to select the pro- gressive display of a video signal. The pro- gressive display projects a smoother video image. Select “Progressive Mode” in the “Pic- ture” menu ➝ For settings, see page Note • 2D Progressive This function is useful to display fast- moving images such as sports and ac-... -
Page 46: Adjusting Computer Images
Adjusting Computer Images Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in portions of the screen. Selected Item Description Clock Adjusts vertical noise. Phase Adjusts horizontal noise (similar to tracking on your VCR). H-Pos Centers the on-screen image by moving it to the left or right. -
Page 47: Selecting Adjustment Settings
Selecting Adjustment Settings Adjustment settings stored in the projector can be easily accessed. Select “Select Setting” in the “Fine Sync” menu ➝ For details, see page 38. Note • If a memory position has not been set, a resolution and frequency setting will not be displayed. -
Page 48: Auto Sync Adjustment
Adjusting Computer Images (cont.) Auto Sync Adjustment Used to automatically adjust a computer im- age. Select “Auto Sync” in the “Fine Sync” menu ➝ For settings, see page 38. Note When setting to “ Normal” or “ High Speed”: • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a com- Screen display during Auto Sync... -
Page 49: Easy To Use Functions
Easy to Use Functions... -
Page 50: Selecting The Picture Display Mode
Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY DOT”, “BORDER”, “STRETCH” or “SMART STRETCH” image. Switching the Picture Display Using Different Input Signals... - Page 51 COMPUTER NORMAL FULL DOT BY DOT SVGA (800 × 600) 1024 × 768 800 × 600 — XGA (1024 × 768) 1024 × 768 — — aspect ratio SXGA (1280 × 960) 1024 × 768 1280 × 960 — UXGA (1600 × 1200) 1024 ×...
-
Page 52: Displaying A Still Image
Displaying a Still Image This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you more time to explain the image to the audience. Storing an Image in Still Image Format Press... -
Page 53: Enlarging A Specific Portion Of An Image
Enlarging a Specific Portion of an Image This function allows you to enlarge a specific portion of an image. This is useful when you want to display a detailed portion of the image. Displaying an Enlarged Portion of an Image Press •... -
Page 54: Gamma Correction Function
Gamma Correction Function Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. When you are displaying images with frequent dark scenes, such as a film or concert, or when you are displaying images in a bright room, this feature makes the dark scenes easier to see and gives the impression of greater depth in the image. -
Page 55: Displaying Dual Pictures (Pict In Pict)
Displaying Dual Pictures (Pict in Pict) Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 2 or 3 as an inset picture overlapping the main picture from INPUT 1. (This function can only be set in the RGB menu.) Displaying the Inset Picture Select “Pict in Pict”... -
Page 56: Selecting The Power Save Mode
Selecting the Power Save Mode The Power Save Mode or the Automatic Power Shutoff function allows you to reduce the power consumption of the projector. Setting the Power Save Mode Function to control the quantity of projected light. Select “ON” or “OFF” to decrease or increase brightness and power consumption. -
Page 57: Activating The Srgb Color Management Function
Activating the sRGB Color Management Function This function calibrates the projector’s output to conform to sRGB standard (6,500K). Setting the Color Manage- ment Function (sRGB) Select “sRGB” in the “Options (1)” menu ➝ For settings, see page 36. Note • When setting sRGB to “ON”, the pro- jected image may become dark;... -
Page 58: Video Digital Noise Reduction (Dnr) System
Video Digital Noise Reduction (DNR) System Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color noise. Reducing Image Noise (DNR) Select “DNR” in the “Options (1)” menu ➝ For settings, see page 38. Note •... -
Page 59: Setting The Video Signal
Setting the Video Signal The video input system mode is preset to “Auto”; however, a clear picture from the con- nected audio-visual equipment may not be received, depending on the video signal differ- ence. In that case, switch the video signal. Setting the Video Signal Select “Video System”... -
Page 60: Saving Projected Images
Saving Projected Images • This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being received. • You can capture the images that are input using analog RGB signals and Digital DVI XGA signals. -
Page 61: Setting A Background Image
Background Image This function allows you to select the image displayed when no signal is being sent to the projector. Selected Item Description Sharp SHARP default image Custom User customized image (i.e. company logo) Blue Blue screen None Black screen *1 You can set a captured image as a background image by selecting “Custom”. -
Page 62: Using An Rgb Monitor Loop-Out Adaptor
Select “Options (2)” menu to see the lamp usage time. Note • It is recommended that the lamp be changed after approximately 1,900 cumu- lative hours of use. For lamp replacement, contact your near- est Sharp Authorized Projector Dealer or Service Center. -
Page 63: Displaying The Break Timer
Displaying the Break Timer Displaying and Setting the Break Timer Select “Break Timer” from the “Options (2)” menu ➝ For details, see page 36. When “ ” is displayed, press "On-screen Display to set the Break Timer. • You can set anywhere between 1 and 60 minutes (in 1 minute units). -
Page 64: Reversing/Inverting Projected Images
Reversing/Inverting Projected Images This projector is equipped with a reserve/invert image function that allows you to reverse or invert the projected image for various applications. Selected Item Description Front Normal image Ceiling + Front Inverted image Rear Reversed image Ceiling + Rear Reversed and inverted image Setting the Projection Mode... -
Page 65: Canceling The Keylock Setting
Canceling the Keylock Setting When the Keylock Level is set to “Normal”, all buttons are functional. Select “Keylock Level” in the “Options Normal”. ➝ For (2)” menu and set “ settings, see page 38. Note • When a password has been set, and “Keylock Level”... -
Page 66: Changing The Password
Setting up a Password (cont.) Changing the Password Select “Password” in the “Options (2)” menu ➝ For selecting, see page 38. Press to enter the password in “Old Pass- word” and press Press to set the new password and press Enter the new 4-digit password again in “Reconfirm”... -
Page 67: Setting The Anti-Theft
Setting the Anti-Theft The anti-theft function prevents unauthorized use of the projector. You can choose to use this function or not. If you do not want to use this function, just do not enter the keycode. Once the theft-deterrent function is activated, users will need to enter the correct keycode each time the projector is started. -
Page 68: Changing The Keycode
If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 78). You may need to bring your projector to them to restore the projector to original factory condition (password and keycode reset). -
Page 69: Initializing The Settings
Initializing the Settings This function allows you to initialize the settings you have made in the projector. Returning to the Default Settings Select “All Reset” in the “Options (2)” menu ➝ For resetting, see page 36. Note • If a password has been set, the pass- word input box will be displayed when selecting “All Reset”. -
Page 70: Displaying The Adjustment Settings
Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Checking the Adjustment Settings on a List Select the “Status” menu and press ➝ For details, see page 36. -
Page 71: Appendix
Appendix... -
Page 72: Carrying The Projector
Carrying the Projector How to Use the Carrying Case When carrying the projector, attach the lens cap to the lens, and place it in the included carrying case. Open the cover of the carrying case. Remove the inner padding from the carrying case, and fold it in the direction of the arrows. -
Page 73: Maintenance
Maintenance Cleaning the projector Cleaning the lens I Be sure to unplug the power cord before clean- I Use a commercially available blower or lens ing the projector. cleaning paper (for glasses and camera lenses) I The cabinet as well as the operation panel is for cleaning the lens. -
Page 74: Maintenance Indicators
• Cooling fan break- • Take the projector to your nearest TURE temperature is Red on/ WARNING down Sharp Authorized Projector Dealer abnormally high. Power off • Internal circuit failure indicator or Service Center (see page 78) • Clogged air intake for repair. -
Page 75: Regarding The Lamp
• Wait at least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool before removing the lamp unit. I If the new lamp does not light after replacement, take your projector to the nearest Sharp Autho- rized Projector Dealer or Service Center for repair. Purchase a replacement lamp unit of type BQC- PGM20X//1 from your nearest Sharp Authorized Projector Dealer or Service Center. -
Page 76: Removing And Installing The Lamp Unit
Regarding the Lamp (cont.) Removing and Install- ing the Lamp Unit Lamp BQC-PGM20X//1 unit Info • Be sure to remove the lamp unit by the handle. Be sure not to touch the glass surface of the lamp unit or the inside of the projector. -
Page 77: Resetting The Lamp Timer
Remove the lamp unit. • Remove the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow. Insert the new lamp unit. • Press the lamp unit firmly into the lamp Securing unit compartment. -
Page 78: Connecting Pin Assignments
Connecting Pin Assignments DVI Digital / Analog INPUT 1 port : 29 pin connector • DVI Digital INPUT Pin No. Signal Pin No. Signal • • • • • • • • • • • • • • • • • • T.M.D.S data 2–... -
Page 79: Computer Compatibility Chart
Computer Compatibility Chart • Multiple signal support Horizontal Frequency: 15–126 kHz Vertical Frequency: 43–200 Hz* Pixel Clock: 12–230 MHz • Compatible with sync on green and composite sync signals • UXGA and SXGA compatible in advanced intelligent compression • AICS (Advanced Intelligent Compression and Expansion System) resizing technology The following is a list of modes that conform to VESA. -
Page 80: Troubleshooting
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. — • The selected input mode is wrong. • Cables incorrectly connected to side panel of the projector. 21–26 •... - Page 81 Problem Check Page • The Keylock level is set. Power cannot be turned on or off using the If the Keylock level is set to Level B, all the buttons are locked. POWER button on the If the Keylock level is set to Level A, only the INPUT, VOLUME projector and AV MUTE buttons work.
-
Page 82: For Sharp Assistance
If you encounter any problems during setup or operation of this projector, first refer to the “Troubleshooting” section on pages and 77. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation... -
Page 83: Specifications
(TINS-7609CEN1), Quick reference guides * Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated. This SHARP projector uses a DMD panel. This very sophis- This unit has some inactive pixels within acceptable toler- ticated panel contains 786,432 pixels. As with any high tech- ances which may result in inactive dots on the picture screen. -
Page 84: Dimensions
Dimensions Units: inches (mm) Rear View Side View Top View Side View (318.3) (302.5) (223) (219) (128) Front View (38.7) (76.1) (82.9) (34.2) (115.5) (195) (82.5) (55.5) (60) (80) (7.5) Bottom View (104) (261.5) -
Page 85: Glossary
Glossary Advanced intelligent compression Keystone correction High quality resizing of lower and higher resolu- Function to digitally correct a distorted image when tion images to fit the projector’s native resolution. the projector is set up at an angle, smoothens out jaggies on keystone images and compresses the Anti-theft image not only horizontally but vertically keeping... -
Page 86: Index
Index 2D Progressive ............ 41 Lens adjustment ..........31 3D Progressive ............ 41 LENS button ............32 Lens cap .............. 68 AC socket ............20 Lens cap strap ............. 11 Adjustment buttons ..........36 Adjustment feet ............ 16 MENU button ............36 All Reset .............. - Page 87 SHARP CORPORATION...