Table of Contents
Advertisement
5
Select the parameter value.
Press the [Tracking +, -] button on the projector (lower the [Enter] button left or right on
the remote control unit) to select the parameter value.
Point
·
(Enter) is attached to the rear of the sub item names that execute the parameters and
continue onto the lower hierarchies. Press the [Enter] button to set this selection, and
then select the parameter setting again.
· Refer to the list of settings for further information on the function of each setting. (see
page 68)
6
Set all of the other items in the same way.
7
Press the [Menu] button.
The menu will end.
Point
· Press the [ESC] button to return to the previous menu in the hierarchy.
· The items displayed on the image menu will differ in accordance with the projected input
source, and menus other than that belonging to the projected input source cannot be
adjusted.
· Image menus cannot be adjusted when no image signals are being input.
Language
Select [English]
Startup Screen
:
ON
OFF
Color Setting
:
Auto
Manual
Comp2Sync Termination
:
Rear Proj.
:
ON
OFF
Ceiling
:
ON
OFF
Reset
Execute
Select
ON
OFF
Menu Operations - 67
Advertisement
Table of Contents
