Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Epson STYLUS CPD-7738
Summary of Contents for Epson STYLUS CPD-7738
- Page 1 Start Here Start Here To get going quickly with your To get going quickly with your EPSON Stylus ® COLOR 900, you’ll need to: ® EPSON Stylus COLOR 900, you’ll need to: Set up the printer Set up the printer...
-
Page 2: Set Up The Printer
1 Unpack the Printer Remove any tape and packing material from the printer as described on the unpacking sheet in the printer box. Make sure you’ve got a cable to connect the printer to your computer, and these items: paper support... -
Page 3: Install The Ink Cartridges
3 Install the Ink Cartridges 1. Plug the printer’s power cord into a grounded outlet. Don’t use an outlet that can be turned off by a wall switch or timer, or one on the same circuit as a large appliance. - Page 4 5. Lift up the black ink cartridge clamp. 6. Place the black ink cartridge in its holder with the label facing up and toward the back of the printer. Then press down the clamp until it locks into place. If ink gets on your hands, wash them thoroughly with soap and water.
-
Page 5: Load Paper
Windows 98 ® 1. Turn off the printer and computer. 2. Connect square end of the USB cable to your printer’s USB connector and the other end to your computer’s USB connector or USB hub. or iMac ™ only) - Page 6 If you’re using a USB hub, connect the printer’s cable to the first tier of the hub or the printer may malfunction. If the printer doesn’t work with the hub, connect it directly to the USB port. Connecting to a PC Parallel Port To ensure your computer is capable of matching your printer’s maximum speed,...
-
Page 7: Install The Software
PhotoMAX Pro are not available with Windows 3.1 or Macintosh. If you don’t have a CD-ROM drive, you can download the drivers or order diskettes from EPSON. See “Ordering Printer Software Diskettes” in the Printer Basics book. Keep this card with you as you install your printer software so you can refer to it when you need to. -
Page 8: Windows 98 With Usb Connection
1. Make sure your printer and computer are connected and turned off. Then turn on your computer and wait until you see the Windows 98 desktop icons. 2. Turn on your printer. You see the Add New Hardware Wizard screen. 3. Insert your printer software CD-ROM and click 4. - Page 9 11. Continue with “Install Your Bonus Software and Electronic Manual” on the back of this card. Windows 3.1 1. Make sure your printer and computer are connected and turned off. 2. Turn on your printer and wait until the stops flashing.
- Page 10 Once you’ve restarted your system, you can install the rest of the software on your CD-ROM. (This section does not apply to Windows 3.1 or Macintosh.) 1. Make sure the printer software CD-ROM is in your drive. Start 2. Click , select is your CD-ROM drive letter).
-
Page 11: Print An Image
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright © 1998 by Epson America, Inc.