[3D Settings] Menu (Pt-Dz21Ku And Pt-Ds20Ku Only); [3D System Setting]; [3D Sync Setting] - Panasonic PT-DS20KU Operating Instructions Manual
Dlp projector
Hide thumbs
Also See for PT-DS20KU:
- Specification (18 pages) ,
- Brochure (8 pages) ,
- Operating instructions manual (186 pages)
Table of Contents
Advertisement
[3D SETTINGS] menu
[3D SETTINGS] menu (PT-DZ21KU and PT-DS20KU only)
Select [3D SETTINGS] from the main menu, and
select the item from the sub-menu.
Refer to "Navigating through the menu"
(
page 61) for the operation of the menu screen.
z After selecting the item, press ▲▼◀▶ to set.
[3D SYSTEM SETTING]
Set a picture display method for use during 3D signal
input as necessary for the 3D system in use.
1) Press ▲▼ to select [3D SYSTEM
SETTING].
2) Press ◀▶ to switch [3D SYSTEM
SETTING].
▶
z The setting will change as follows each time
you press the button.
[SINGLE]
During 3D signal input, sequential
frames of images for the right eye
[SINGLE]
and images for the left eye are
alternately displayed.
[DUAL
Only images for the left eye are
(LEFT)]
displayed during 3D signal input.
[DUAL
Only images for the right eye are
(RIGHT)]
displayed during 3D signal input.
Note
z When 2D images are input, 2D images are
displayed regardless of [3D SYSTEM SETTING]
settings.
82 - ENGLISH
[DUAL (LEFT)]
[DUAL (RIGHT)]
(PT-DZ21KU and PT-DS20KU only)
[3D SYNC SETTING]
Set the way in which the <3D SYNC 1 IN/OUT>
terminal and the <3D SYNC 2 OUT> terminal will be
used.
Attention
z Before connecting the external device with the
cables to the <3D SYNC 1 IN/OUT> terminal and
the <3D SYNC 2 OUT> terminal, finish the [3D
SYNC MODE] setting and confirm that the device is
turned off.
z Changing [3D SYNC MODE] while connecting the
cables may result in malfunctions of the projector or
external devices connected.
1) Press ▲▼ to select [3D SYNC
SETTING].
2) Press the <ENTER> button.
▶
z The precaution message related to 3D SYNC
setting is displayed.
3) Press the <ENTER> button.
▶
z The [3D SYNC SETTING] screen is displayed.
4) Press ▲▼ to select [3D SYNC MODE].
5) Press ◀▶ to switch [3D SYNC MODE].
▶
z The setting will change as follows each time
you press the button.
[OFF]
[11]
[10]
[9]
[8]
[7]
▶
zItems set in [3D SYNC1]
[OFF]
Not used.
[1]
3D trigger output
[2]
3D trigger output
[3]
Stereo synch input
[4]
Stereo synch input
[5]
Stereo synch input
[6]
Frame synch input
[7]
Frame synch input
[8]
Frame synch input
[9]
3D trigger output
[10]
Stereo synch output
[11]
3D IR TRANSMITTER (+) output
[1]
[2]
[3]
[4]
[5]
[6]
Advertisement
Table of Contents
