Table of Contents
Advertisement
Putting the door glass panels back.
1. From above insert the door glass panels one af-
ter the other into the door profile at the bot-
tom edge of the door at an angle and lower
them.
The two smaller panels first, then the larger
3
panel.
2. Take hold of the door trim (B) at each side, posi-
tion it on the inside edge of the door and plug
the door trim (B) into the upper edge of the
door.
On the open side of the door trim (B) there is a
3
guide bar (C). This must be pushed between the
outer door panel and the guide corner (D).
The clip seal (E) must be snapped in.
Cleaning and Care
35
Advertisement
Table of Contents
