Digital Camera Quick Start Guide For the full vewrsion of the p550 product user manual go to: www.hp.com/support p550 :www.hp.com/support p550 :www.hp.com/support p550 : www.hp.com/support p550 . : www.hp.com/support...
Quick Start Guide ENGLISH General Guide The numbers in parentheses indicate the pages where each item is explained. Camera Front Back [ SET ] 1 Zoom controller 9 Back lamp 17 Control button 2 Shutter button 10 [ ] (9LGHR) button ([ ] [ ] [ ] [ ]) 3 Flash 11 Strap hole...
Page 3
Configuring Basic Settings the First Time You Power On the Camera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with SKRWRs.
Using the Control Panel The Control Panel can be used to configure camera settings. In the REC mode, press [SET]. This will select one of the Control Panel icons and display its settings. [ ] [ ] [ ] [ ] Available settings Control Panel [SET]...
Using the Simple Mode The Simple mode eliminates troublesome setups and simplifies snapshot recording. This mode is recommended for those who are new to digital SKRWRJUDSK\. In the REC mode, press [SET]. Use [ ] and [ ] to select the third option from the bottom in the Control Panel (Simple Mode).
Page 6
To shoot an SKRWR with Scene Mode In the REC mode, press [SET]. Currently selected scene (with boundary) [ ] [ ] [ ] [ ] Use [ ] and [ ] to select the bottom Control Panel option (SCN) and then press [SET].
Using On-screen Menus Example REC Menu Screen Operation [ ] [ ] [ ] [ ] In the REC mode, press [SET]. Use [ ] and [ ] to select the second Control Panel option from the bottom (MENU) and then press [SET].
Using the PLAY Panel Pressing [SET] in the PLAY mode will display the PLAY Panel. Example PLAY Panel Operation In the PLAY mode, press [SET]. [ ] [ ] PLAY Panel The PLAY Panel will appear along the right side of the monitor screen. Use [ ] and [ ] to select the PLAY Panel item you want, and then press [SET].