Table of Contents
Advertisement
DEUTSCH
Für Erlauterungen in Deutsch, konsultieren Sie bitte die mitgelieferte CD-ROM.
FRANÇAIS
Pour des explications en français, veuillez vous reporter au CD-ROM fourni.
ITALIANO
Per le istruzioni in italiano, vedere il CD-ROM in dotazione.
ESPAÑOL
Para la explicación en español, consulte el CD-ROM suministrado.
Before operating this product, please read the instructions carefully and save this manual for future use.
SS0112KT0 -PS
Printed in Japan
Operating Instructions
BT-LH1850P
Model No.
BT-LH1850E
Model No.
LCD Video Monitor
ENGLISH
VQT4F03
Advertisement
Table of Contents
Related Manuals for Panasonic BT-LH1850
Summary of Contents for Panasonic BT-LH1850
-
Page 1: Operating Instructions
Operating Instructions LCD Video Monitor BT-LH1850P Model No. BT-LH1850E Model No. DEUTSCH Für Erlauterungen in Deutsch, konsultieren Sie bitte die mitgelieferte CD-ROM. FRANÇAIS Pour des explications en français, veuillez vous reporter au CD-ROM fourni. ITALIANO Per le istruzioni in italiano, vedere il CD-ROM in dotazione. ESPAÑOL Para la explicación en español, consulte el CD-ROM suministrado. -
Page 2: Read This First ! (For Bt-Lh1850P)
Wrongly wired extension cords are a major cause of fatalities. The fact that the equipment operates satisfac- This Monitor is for use only with Panasonic Wall Mount torily does not imply that the power outlet is grounded or Adaptor, BT-WMA17G. Use with other Wall Mount or Rack that the installation is completely safe. -
Page 3: Important Safety Instructions
Read this first ! (for BT-LH1850P) (continued) FCC NOTICE (USA) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation CAUTION: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC... -
Page 4: Read This First ! (For Bt-Lh1850E)
CAUTION: Always keep the tilt stand screws and protective panel This Monitor is for use only with Panasonic Wall Mount mounting screws out of the reach of infants and small chil- Adaptor, BT-WMA17G. Use with other Wall Mount or Rack dren. - Page 5 If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. Fuse indicates safety information. Note regarding the Power Management function specified under COMMISSION REGULATION (EC) No 1275/2008 implementing Directive 2009/125/EC of the European Parliament and of the Council.
-
Page 6: Transportation Precautions
Read this first ! (for BT-LH1850E) (continued) EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1. Applicable standards and operating environment The apparatus is compliant with: • standards EN55103-1 and EN55103-2 2009, and • electromagnetic environments E1, E2, E3 and E4. 2. -
Page 7: About This Instruction Manual
About this instruction manual • This instruction manual refers to BT-LH1850P/1850E as “this unit.” • The illustrations, explanatory drawings, and other figures included in this instruction manual are for illustrative purposes only and may differ from actual display. • HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries. -
Page 8: Table Of Contents
Contents Read this first ! (for BT-LH1850P) ...........2 How to Use the On Screen Menu ..........18 Main menu ................18 Read this first ! (for BT-LH1850E) ...........4 FUNCTION menu ..............18 Transportation precautions .............6 INPUT SELECT menu ............18 About this instruction manual ..........7 Picture adjusting menu ............19 Audio volume .................19 Precautions for Use..............7... -
Page 9: About Pdf Manuals
About PDF manuals Supplied CD-ROM is provided with Operating Instructions which are in the form of a PDF(Portable Document Format) file. • You need to have the Adobe ® Reader ® installed to open and view PDF files. • Download the Adobe ®... -
Page 10: Dimensions
Dimensions Unit: mm (inches) 76.5 (3) (3-15/16) 44.3 (1-3/4) 479 (18-7/8) 4-M4 P=0.7 32.2 (1-1/4) Depth 20 (Max) 411.4 (16-3/16) 44.9 (1-3/4) 121.9 (4-13/16) Center of tilt rotation • When installing the monitor in one place permanently, we recommend that you fix the monitor in place using the screw holes on the back of the stand. -
Page 11: Controls And Their Functions
Controls and Their Functions Video monitor Front panel Rear panel Front panel Power supply Rear panel (This page) (you can switch between AC (→page 12) and DC (→page 13)) Tally Lamps (Red and Green) Tilt Stand Can be lit by a control signal (red tally and green tally) from The tilt stand allows you tilt the unit approx. -
Page 12: Rear Panel
Controls and Their Functions (continued) PICTURE: MENU button, rotary knobs (with push-on switch (PIC- When no menu is displayed, press the rotary knob to TURE)) and RETURN/VOLUME button (→page 15) open the picture adjusting menu. (→page 15) Use these buttons to display menus, select and adjust set- VOLUME: tings and perform menu selections. -
Page 13: Power Supply
Power supply Connecting the power cable Attach the power cable to the unit. „ When using external DC power (12 V DC) „ You can slide open the power cover to switch from AC input to external DC input. Power cover <Note>... -
Page 14: Detaching And Attaching The Tilt Stand
Detaching and Attaching the Tilt Stand The tilt stand is detachable. • When detaching and attaching the tilt stand, it is recommended that you place the unit flat on the edge of a desk or table with a soft cloth or similar material spread underneath. Detaching the tilt stand Attaching the tilt stand Plate... -
Page 15: Main Menu, Function Menu, Input Select Menu Indications
On-screen Display (continued) Main menu, FUNCTION menu, INPUT SELECT menu indications Press MENU when no menu is displayed. • The TOP MENU appears. [TOP MENU] MAIN MENU FUNCTION INPUT SELECT MENU EXIT Turn the rotary knob to select a menu (MAIN MENU, FUNCTION, INPUT SELECT) and press the rotary knob. •... -
Page 16: Sharpness Display
On-screen Display (continued) Sharpness display • Indicates the “SHARPNESS H/V” setting value of the “VIDEO CONFIG” menu. • If no operation is performed for 2 minutes, the setting value is confirmed and the display disappears. [SHARPNESS H] 14 MENU EXIT RETURN RETURN FUNCTION display... -
Page 17: Time Code (Tc) Display
On-screen Display (continued) Time code (TC) display • Use the menu to display the time code for HD-SDI signal input. It also allows you to switch display mode (LTC, VITC, LUB, VUB). (→page 40) In VITC and LTC display mode: •... -
Page 18: How To Use The On Screen Menu
How to Use the On Screen Menu Press the rotary knob. Main menu • Each press of the rotary knob changes the set value and • For details on how to display MAIN MENU, refer to “Main enables function operation. menu, FUNCTION menu, INPUT SELECT menu indications”... -
Page 19: Picture Adjusting Menu
How to Use the On Screen Menu (continued) Turn the rotary knob to select a set value and press the Picture adjusting menu rotary knob. Turn the rotary knob to select a menu item and press the • The set value is confirmed and the menu reappears. rotary knob. -
Page 20: User Data
User Data This unit can save up to five combinations of set values for main menu and screen adjustments made in the picture adjusting menu as user data that can be recalled. You can also return settings and adjustments to their factory defaults. User data include the following settings. -
Page 21: Main Menu
Main menu Menu configuration MAIN MENU MARKER MARKER 16:9 GAMMA SELECT VIDEO CONFIG FILM GAMMA BACK SYSTEM CONFIG SUB WINDOW COLOR TEMP. CENTER MENU POSITION SHARPNESS MODE USER0-63 CROSS STATUS DISPLAY SHARPNESS H COLOR INPUT NAME SETUP SHARPNESS V GPI MARKER1 VIDEO I-P MODE GPI MARKER2... -
Page 22: Marker
Main menu (continued) MARKER The underlined values are factory preset setting values. Sub menu Settings Description MARKER Enables the MARKER setting. 16:9 Selects/displays the marker type for when the angle of view of the displayed image is 16:9. 13:9 <OFF> No marker display 14:9 <4:3>... - Page 23 TYPE1 Selects conventional monitor or camera recorder marker size. TYPE2 <TYPE1> Conventional monitor marker size <TYPE2> Marker size compliant with the camera recorder (Panasonic made) CROSS HATCH Turns the cross hatch grid on and off and sets its density. <OFF>...
-
Page 24: Types Of Marker
Main menu (continued) Types of MARKER „ 16:9 marker „ 4:3 marker „ „ (Displayed for HD input and SD input with 16:9 aspect ratio.) (Displayed for SD input in 4:3 aspect ratio mode) The marker is only displayed as a vertical bar. In addition, This marker is displayed as a dotted line. -
Page 25: Video Config
Main menu (continued) VIDEO CONFIG The underlined values are factory preset setting values. Sub menu Settings Description GAMMA SELECT STANDARD Selects gamma curve. FILM <STANDARD> Standard mode (2.2 gamma value) STDIO/PST <FILM> Film mode <STDIO/PST> Color emphasis mode (2.35 gamma value) •... - Page 26 Main menu (continued) Sub menu Settings Description MONO Switches between color and monochrome (MONO). <OFF> Color <ON> Monochrome • When ON, the CHROMA setting of the picture adjusting knob is fixed at 0. ANAMO With an Anamo lens and HD-SDI input, the picture is resized to Anamo magnification (the vertically enlarged signal can be vertically compressed and corrected for display).
-
Page 27: System Config
Main menu (continued) „ GAIN/BIAS RGB direct adjustment mode „ Press the rotary knob when the “GAIN” or “BIAS” item is selected in the WHITE BALANCE VAR (1 to 3) menu, to switch to the adjust- ing screen and use the rotary knob to directly adjust RGB while checking the picture. If “WHITE BALANCE”... - Page 28 Main menu (continued) Sub menu Settings Description POWER ON SETUP LAST Selects the settings used when the power is turned on. FACTORY <LAST> Starts in the mode used when the power was last turned off. USER1 <FACTORY> Starts up using the factory defaults. USER2 <USER1 - 5>...
-
Page 29: Performing Auto Calibration
Main menu (continued) „ Equipment required for calibration „ • Konica Minolta CA-310 display color analyzer (optional accessory) • Konica Minolta CA-PU12 or CA-PU15 standard measurement probe (optional accessory) • A RS-232C cable (male to male, straight) (optional accessory) Connect the RS-232C input terminal on this unit to the RS-232C terminal on the display color analyzer using a straight cable. •... -
Page 30: Reset Operation
Main menu (continued) RESET operation Turn the rotary knob in the “SYSTEM CONFIG” menu to Select “YES” and press the rotary knob. select the “CALIBRATION” submenu and press the rotary This starts calibration. knob. [RESET] Turn the rotary knob to select the “RESET” submenu and press the rotary knob. - Page 31 Main menu (continued) Sub menu Settings Description (From the previous <FOCUS-IN-RED> Turns On/Off the function that highlights in red the section of the image that is page) being focused. <LEVEL METER> Turns the AUDIO LEVEL METER display On and Off. <CROSS HATCH>...
- Page 32 Main menu (continued) „ FUNCTION setting restrictions „ Under the following conditions, “INVALID FUNCTION” is displayed and the settings cannot be configured. Settings Inoperable Condition or Mode HV DELAY • SUB WINDOW • WFM • PIXEL TO PIXEL • During DVI-I (digital or analog signal PC) input •...
- Page 33 Main menu (continued) „ Functions displayed during FUNCTION button operation „ Pressing any of the [FUNCTION1] to [FUNCTION5] buttons displays the operations assigned to each button as shown below. • HV DELAY • PIXEL TO PIXEL DELAY OFF/H DELAY/V DELAY/HV DELAY PIXEL TO PIXEL OFF/PIXEL TO PIXEL CENTER/ •...
- Page 34 Main menu (continued) „ HV DELAY „ This displays the blanking period. Each press of the button changes the display as follows: H blanking display → V blanking display → H and V blanking display → no blanking display. „ SUB WINDOW „...
- Page 35 Main menu (continued) „ WFM/VECTOR „ The WFM/VECTOR function enables display of the waveform and vector display. Use DISPLAY SETUP in the main menu to select WFM and VECTOR display. (→page 40) Press the button ([FUNCTION1] to [FUNCTION5] (→page 11)) to which the WFM/VECTOR function has been assigned to switch the display in the following order.
- Page 36 Main menu (continued) „ PIXEL TO PIXEL and PIXEL POSITION „ The PIXEL TO PIXEL function allows you to check images at their actual pixel resolution (HD signals only). Press the button ([FUNCTION1] to [FUNCTION5] (→page 11)) to which the PIXEL TO PIXEL function has been assigned to turn the function on.
-
Page 37: Gpi
Main menu (continued) „ FOCUS-IN-RED „ FOCUS-IN-RED shows the outline of a subject that is in focus in red to simplify focusing the camera. Each press of the button (“FUNCTION1” to “FUNCTION5”) to which the FOCUS-IN-RED has been assigned turns the function on and off. -
Page 38: Input Select
Main menu (continued) INPUT SELECT The underlined values are factory preset setting values. Sub menu Settings Description VIDEO AUTO Selects the VIDEO input format. NTSC <AUTO> Automatically selects NTSC or PAL. <NTSC> NTSC <PAL> NTSC SETUP Selects NTSC setup level. <00>... -
Page 39: Audio
Main menu (continued) AUDIO Sets the audio level meters to audio output (speakers, headphones). The underlined values are factory preset setting values. Sub menu Settings Description INPUT SELECT AUTO Selects speaker, headphones output and audio level meter indication. ANALOG <AUTO> When an SDI input line is selected with the INPUT SELECT button (→page 11) on the front panel: Embedded audio (SDI terminal) When an HDMI input line is selected with the INPUT SELECT button... -
Page 40: Display Setup
Main menu (continued) DISPLAY SETUP The underlined values are factory preset setting values. Sub menu Settings Description WFM/VECTOR Switches between “WFM/VECTOR” waveform and vector display. <WFM Y> - <WFM B> Displays waveforms. WFM Y <VECTOR> Displays vector waveforms. WFM R WFM G WFM B VECTOR... -
Page 41: Control
Main menu (continued) Sub menu Settings Description IN MONITOR DISPLAY Enables IMD display. POSITION Selects the position for the IMD display. BOTTOM <TOP> <BOTTOM> Bottom CHAR. COLOR Selects IMD font color. WHITE <CMD> Color specified by command BLUE <WHITE> White GREEN <BLUE>... -
Page 42: Setting Item Restrictions
Setting Item Restrictions „ List of Setting Item Restrictions „ (: Can be set) DVI-I ANALOG DIGITAL Input CH VIDEO SDI1/SDI2 HDMI RGB- COMP. VIDEO Settings COMP. — — — MARKER ... - Page 43 Setting Item Restrictions (continued) (: Can be set) DVI-I ANALOG DIGITAL Input CH VIDEO SDI1/SDI2 HDMI RGB- COMP. VIDEO Settings COMP. — — — VIDEO NTSC SETUP ...
-
Page 44: Remote Specifications
REMOTE Specifications This monitor permits remote operation via GPI input terminal, RS-232C input terminal or RS-485 input/output terminal. GPI input terminal GPI screen items correspond to the following terminals. Use the GPI menu to Pin number Signal assign functions to each terminal (→page 37). GPI1 The functions assigned to each terminal are executed as specified depending on GPI input terminal... -
Page 45: Rs-232C Input Terminal
REMOTE Specifications (continued) Assigned item Function Operating conditions PIXEL TO PIXEL Switches screen display between input size and display Level operation size. (Short-circuited: ON, Open: OFF) FOCUS-IN-RED Displays the outlines of the subject that are in focus in Level operation (Short-circuited: ON, Open: OFF) REMOTE STANDBY Sets REMOTE STANDBY (the backlight is turned off). -
Page 46: Rs-485 Input/Output Terminal
REMOTE Specifications (continued) RS-485 input/output terminal The RS-485 interface enables external operations. The figures below show RS-485 input/output terminal pin arrangement and connections. TSL protocol version3.1 or version4.0 is supported. Make sure that the same TSL protocol versions are used on external control devices and the monitor. - Page 47 REMOTE Specifications (continued) „ Setting command „ Send Command Command Name Data Response IIS:<data> INPUT SELECT 0 : SDI1 1 : SDI2 2 : VIDEO 6 : DVI 8 : HDMI 9 : INT-SG VPC:CON<data> CONTRAST 00 - 60 VPC:BRI<data> BRIGHT 00 - 60 VPC:CRO<data>...
- Page 48 REMOTE Specifications (continued) Send Command Command Name Data Response DWM:<data> WFM/VECTOR 0 : OFF 1 : WFM Y ON 2 : WFM R ON 3 : WFM G ON 4 : WFM B ON 5 : VECTOR ON VWB:RGN<data> WHITE BALANCE 0000 - 1023 : RED GAIN settings (R GAIN) VWB:GGN<data>...
- Page 49 REMOTE Specifications (continued) „ Query command „ Command: Description Response data Parameter INPUT SELECT 0 : SDI1 1 : SDI2 2 : YP (DVI-ANALOG-VIDEO) 4 : VIDEO 6 : RGB-COMP. (DVI-ANALOG-COMP.) 9 : DVI-DIGITAL-VIDEO 10 : DVI-DIGITAL-COMP. 11 : HDMI 12 : INT-SG QPC:CON CONTRAST...
- Page 50 6 : 7ch 7 : 8ch AUDIO MUTE 0 : OFF 1 : ON MODEL CHECK BT-LH1850 Responds with the current setting status of the CLOSED CAPTION, CC TYPE, CAPTION CHANNEL, CAPTION SERVICE sub menu items under the DISPLAY SETUP menu.
-
Page 51: Error And Warning Displays
Error and Warning Displays If for any reason an error occurs in the monitor, the following indications are made to notify the error or warning. Error and Warning Displays Displayed information Remedy Warning of drop in external DC A “LOW VOLTAGE” indication in blue If the power goes off, connect an external DC input voltage/LOW VOLTAGE flashes on the screen. -
Page 52: Specifications
Specifications „ General „ Power input Power supply Power consumption AC : 100 V – 240 V, 50/60 Hz 0.30 A – 0.15 A DC : 12 V (11 V – 17 V) 1.8 A indicates safety information. Dimensions (W x H x D): 479 mm x 390.7 mm x 240 mm ( 18-7/8 inches x 15-3/8 inches x 9-7/16 inches) (including tilt stand) 479 mm x 339 mm x 76.5 mm (18-7/8 inches x 13-3/8 inches x 3 inches) (monitor only not including tilt stand) - Page 53 Specifications (continued) „ List of supported video input signal formats (: Supported) „ DVI-I Input Signal Format/ VIDEO SDI1/SDI2 HDMI ANALOG DIGITAL Status display VIDEO NTSC 640×480 (59.94p) 640×480 (60p) 480/59.94i 480/59.94p ...
- Page 54 Specifications (continued) „ Closed Caption Decoding „ Supported Signals Composite NTSC, PAL SD-SDI 480/59.94i, 576/50i HD-SDI 1080/60i , 720/60p , 1080/50i, 720/50p, 1080/24PsF , 1080/25PsF, 1080/30p , 1080/24p 1080/25p Supported Standards Composite EIA/CEA-608 (VBI) , OP-42 SD-SDI EIA/CEA-608 (VBI) , EIA/CEA-608 (ANC) , OP-42 HD-SDI EIA/CEA-608 (708) , EIA/CEA-708, OP-47 Supported Specifications (EIA/CEA-608)
- Page 55 Specifications (continued) „ INT-SG (Internal chart for adjustment) „ 90% 100% 90% 100% GRAY GRAY YELLOW YELLOW CYAN CYAN GREEN GREEN MAGENTA MAGENTA BLUE BLUE WHITE WHITE BLACK BLACK BLACK BLACK BLACK -4% BLACK +4% BLACK...
-
Page 56: Index
INDEX Numerics GPI MARKER1 ............... GPI MARKER2 ............... 4:3 ................... GREEN ................... 16:9 ..................HDMI terminal ................. Adjusting monitor angle ............HEADPHONES output jack ............ ANALOG ................. HEAD ROOM ................. ANAMO .................. HOURS METER ..............AUDIO ..................H POSITION ................AUDIO input terminal .............. - Page 57 INDEX (continued) RESET ..............RETURN button ..............RGB-COMP................Rotary knob ................RS-232C input terminal ........... RS-485 ID SETUP ..............RS-485 input/output terminal ........... RS-485 STX&ETX ..............SCAN ................SD ASPECT ..............SDI terminal ................SELECT L ................SELECT R ................SETUP LOAD .................
- Page 58 MEMO...
- Page 59 MEMO...
- Page 60 Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Web Site: http://panasonic.net © 2012...