DMR-EZ47 RRT Firmware Installation Instructions Table of Contents Table of Contents ....................1 Firmware History....................2 1.1 Applicable Models ..................2 1.2 Purpose...................... 2 Download Firmware ..................3 Burn Firmware....................4 3.1 Windows® OS CD Writing Program ..............4 3.2 Other OS CD Writing Program................ 5 3.3 3 Party CD Burning Software ...............
Firmware History Applicable Models DMR-EZ47, DMR-EZ475 Includes models with the suffix K, S, VK, or VS Purpose The RRT Firmware will enable the DVD Recorder to download the new V-Chip Regional Rating Table data stream. DMR-EZ47 DVD Recorder RRT Firmware Installation Instructions Page 2 of 8...
Download Firmware 1) Left click on the DOWNLOAD icon for the DMR-EZ47 RRT Firmware. - DMR-EZ47 Regional Rating Table (RRT) Firmware 2) Left click on SAVE. The file name displayed should be PANA_DVD.FRM. 3) Left click on DESKTOP, and then left click on SAVE. NOTE: The PANA_DVD.FRM file will be placed on the DESKTOP.
Burn Firmware Use one of the below methods to burn firmware to CD-R disc. Windows OS CD Writing Program ® 1) Insert a blank CD-R disc into a CD Burner Drive installed in or attached to the computer. 2) If the below (or similar) screen appears (Windows XP), left click on CANCEL. 3) Right click on the PANA_DVD.FRM file on the DESKTOP, mouse over...
5) Lift click on the YOU HAVE FILES WAITING TO BE WRITTEN TO THE CD icon in the SYSTEM TRAY. 6) Left click on WRITE THESE FILES TO 7) Type a name for the CD, check the CLOSE THE WIZARD AFTER THE FILES HAVE BEEN WRITTEN check box, and then left click on NEXT.
Dragging & Dropping If an icon for the CD Burner Drive has been placed on the DESKTOP, left click on the firmware file, hold the left mouse button down, drag the file to the CD Burner Drive icon and release the left mouse button. If using Windows XP operating system, use procedure beginning at STEP 5 of SECTION 3.1 on PAGE 5 of 8.
Install Firmware CAUTION: Do not turn the DVD Recorder OFF or press any buttons on the DVD Recorder while the firmware update is in progress. 1) Power the DVD Recorder on. 2) Press the [OPEN/CLOSE] button to OPEN the disc tray. 3) Place the CD-R with the firmware update into the disc tray with the label side facing up.
Page 8
• When the DVD Recorder is powered back on, the FIRST TIME SETUP screen should be displayed. 9) Follow the on-screen prompts to complete the FIRST TIME SETUP. DMR-EZ47 DVD Recorder RRT Firmware Installation Instructions Page 8 of 8...