hit counter script
Asus I220GC User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. I220GC
  6. User manual
Asus I220GC User Manual

Asus I220GC User Manual

User manual
Hide thumbs Also See for I220GC:
Table of Contents

Advertisement

Quick Links

Download this manual
I220GC

Advertisement

Table of Contents
loading

Related Manuals for Asus I220GC

Summary of Contents for Asus I220GC

  • Page 1 I220GC...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Contents Notices ......................vi Safety information ..................vii About this guide ..................viii I220GC specifications summary ..............x Chapter 1: Product introduction Welcome! ..................1-2 Package contents ................. 1-2 Special features ................1-2 1.3.1 Product highlights ............1-2 1.3.2 Innovative ASUS features ..........1-3 Before you proceed ..............
  • Page 4 Chapter 2: BIOS setup Managing and updating your BIOS ..........2-2 2.1.1 Creating a bootable floppy disk ........2-2 2.1.2 ASUS EZ Flash 2 utility ........... 2-3 2.1.3 AFUDOS utility ..............2-4 2.1.4 ASUS CrashFree BIOS 3 utility ........2-6 2.1.5 ASUS Update utility ............
  • Page 5 Boot Device Priority ............2-32 2.6.2 Boot Settings Configuration .......... 2-33 2.6.3 Security ................. 2-34 Tools menu ................. 2-36 ASUS EZ Flash 2 ................. 2-36 Exit menu ..................2-37 Chapter 3: Software support Installing an operating system ........... 3-2 Support CD information .............. 3-2 3.2.1...

  • Page 6: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.

  • Page 8: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 9: Conventions Used In This Guide

    Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.

  • Page 10: I220Gc Specifications Summary

    I220GC specifications summary Integrated (FC-BGA6) Intel Celeron Processors 200 ® ® Series Intel EM64T and Execute Disable Bit Technology ® Chipset Northbridge: Intel 945GC ® Southbridge: Intel ICH7 ® Front Side Bus CPU supports 533 MHz; Chipset supports 800/533 MHz.
  • Page 11 I220GC specifications summary Internal connectors 2 x USB 2.0 connectors for 4 additional USB 2.0 ports 1 x Floppy disk drive connector 1 x IDE connector 4 x Serial ATA connectors 1 x CPU fan connector 1 x Chassis fan connector...

  • Page 13: Chapter 1: Product Introduction

    This chapter describes the motherboard features and the new technologies it supports. Product introduction...

  • Page 14: Welcome

    ® The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

  • Page 15: Innovative Asus Features

    1.3.2 Innovative ASUS features ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 allows users to restore corrupted BIOS data from a USB flash disk containing the BIOS file. See page 2-6 for details. ASUS EZ Flash 2 EZ Flash 2 is a user-friendly BIOS update utility. Simply press the predefined hotkey to launch the utility and update the BIOS without entering the OS.

  • Page 16: Before You Proceed

    The illustration below shows the location of the onboard LED. I220GC SB_PWR Standby Powered Power I220GC Onboard LED Chapter 1: Product introduction...

  • Page 17: Motherboard Overview

    Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis I220GC ASUS I220GC...

  • Page 18: Motherboard Layout

    1.5.3 Motherboard layout 18.8cm(7.4in) PS/2KBMS T: Mouse ATX12V B: Keyboard BIOS I220GC USB34 Intel MCH 945GC LAN_USB12 RTM876-660 AUDIO CR2032 3V PCIEX1_1 Lithium Cell CMOS Power Atheros SB_PWR Super I/O PCI1 Intel ICH7 PCI2 ALC662 SPDIF_OUT FLOPPY AAFP USB78 USB56...

  • Page 19: Central Processing Unit (Cpu)

    I220GC CPU Socket Celeron 220 Series • Ensure that the CPU fan cable is connected to the onboard CPU_Fan connector. • Use only ASUS qualified CPU on this motherboard to get the maximum performance. CPU_FAN +12V CPU FAN IN I220GC...

  • Page 20: System Memory

    240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket. The figure illustrates the location of the DDR2 DIMM sockets: I220GC I220GC 240-pin DDR2 DIMM Sockets Channel Sockets Channel A...

  • Page 21: Memory Configurations

    DDR2 Qualified Vendors List The following table lists the memory modules that have been tested and qualified for use with this motherboard. Visit the ASUS website (www.asus.com) for the latest DDR2 DIMM modules for this motherboard. Make sure to choose the right QVLs (Qualified Vendors List) from ASUS website according to the version of your mother board.
  • Page 22 DDR2 533 Qualified Vendors List DIMM support Size Vendor Model Brand Side(s) Part No. 512MB Kingston KVR533D2N4/512 Infineon HYB18T512800AF3733336550 · · Kingston KVR533D2N4/1G Hynix HY5PS12821EFP-Y5 · · HYMP512U64CP8-C4 AB Hynix HY5PS12821CFP-C4 · · Corsair VS1GB533D2 Corsair 64M8CFEGQIB0900718 · · 512MB Elpida EBE51UD8ABFA-5C-E Elpida...

  • Page 23: Memory Configuration

    B*: - supports one pair of modules inserted into the yellow slots as one pair of Dual-channel memory configuration. Visit the ASUS website (www.asus.com) for the latest memory Qualified Vendor List (QVL). Make sure to choose the right QVLs according to the version of your mother board.

  • Page 24: Installing A Dimm

    1.7.4 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. To install a DIMM: DDR2 DIMM notch Unlock a DIMM socket by pressing the retaining clips outward.

  • Page 25: Expansion Slots

    Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for information on BIOS setup. Assign an IRQ to the card. Refer to the tables on the next page. Install the software drivers for the expansion card. ASUS I220GC 1-13...

  • Page 26: Interrupt Assignments

    1.8.3 Interrupt assignments Standard interrupt assignments Standard Function System Timer Keyboard Controller Re-direct to IRQ#9 Communications Port (COM1)* IRQ holder for PCI steering* Floppy Disk Controller Printer Port (LPT1)* System CMOS/Real Time Clock IRQ holder for PCI steering* IRQ holder for PCI steering* IRQ holder for PCI steering* PS/2 Compatible Mouse Port* Numeric Data Processor...

  • Page 27: Pci Slots

    PCI Express x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications. The figure shows a network card installed on the PCI Express x1 slot. ASUS I220GC 1-15...

  • Page 28: Jumpers

    Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data. Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure! CLRTC I220GC Normal Clear RTC (Default) Clear RTC RAM...
  • Page 29 ATX power supply that can supply at least 500 mA on the +5VSB lead, and a corresponding setting in the BIOS. I220GC PS2_USBPWR1-8 I220GC USB Device Wake Up The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. ASUS I220GC...

  • Page 30: 1.10 Connectors

    1.10 Connectors 1.10.1 Rear panel connectors PS/2 mouse port (green). This port is for a PS/2 mouse. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. LAN (RJ-45) port. This port allows 10/100M connection to a Local Area Network (LAN) through a network hub.

  • Page 31: Internal Connectors

    Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5. I220GC FLOPPY PIN1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. Floppy Disk Drive Connector I220GC ASUS I220GC 1-19...
  • Page 32 Ultra DMA 100/66 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to configure your device(s). I220GC IDE Connector I220GC Drive jumper setting...

  • Page 33: Serial Ata Connectors

    SATA3/4 Black Slave Data Disk Speaker connector (4-pin SPEAKER) This 4-pin connector is for the chasis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. I220GC SPEAKER Speaker Out I220GC Speaker Out Connector ASUS I220GC 1-21...
  • Page 34 This connector is for the S/PDIF audio module to allow digital sound output. Connect one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF module. I220GC SPDIF_OUT I220GC Digital Audio Connector The S/PDIF out module is purchased separately. 1-22 Chapter 1: Product introduction...

  • Page 35: Atx Power Connectors

    +12 Volts +5 Volts +5V Standby +5 Volts I220GC Power OK -5 Volts Ground Ground +5 Volts Ground Ground Ground +5 Volts PSON# Ground Ground +3 Volts -12 Volts I220GC ATX Power Connector +3 Volts +3 Volts ASUS I220GC 1-23...

  • Page 36: Usb Connectors

    CD-ROM, TV tuner, or MPEG card. (black) I220GC I220GC Internal Audio Connector Enable the CD-IN function in the audio utility when using this connector. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
  • Page 37 Azalia-compliant Legacy AC 97-compliant pin definition pin definition I220GC AAFP I220GC Front Panel Audio Connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability. • By default, this connector is set to AC97 Audio. If you want to connect a High Definition front panel audio module to this connector, set the Front Panel Support Type item in the BIOS to [HD Audio].

  • Page 38: System Panel Connector 10-1 Pin F_Panel

    Ground PLED- IDELED- PLED+ IDELED+ I220GC System Panel Connector • System power LED (2-pin PWRLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

  • Page 39: Chapter 2: Bios Setup

    This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup...

  • Page 40: Managing And Updating Your Bios

    The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. ASUS EZ Flash 2 (Updates the BIOS in DOS mode using a floppy disk or USB flash disk.) ASUS AFUDOS (Updates the BIOS in DOS mode using a bootable floppy disk.)

  • Page 41: Asus Ez Flash 2 Utility

    2.1.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing <Alt>...

  • Page 42: Afudos Utility

    Extension name Press <Enter>. The utility copies the current BIOS file to the floppy disk. A:\>afudos /oOLDBIOS1.rom AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB)) Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..done Write to file..ok A:\>...

  • Page 43: Updating The Bios File

    Visit the ASUS website (www.asus.com) and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable floppy disk. Make sure to choose the right BIOS files from ASUS website according to the version of your mother board. Refer to your Printed Circuit Board (PCB) for version information.

  • Page 44: Asus Crashfree Bios 3 Utility

    2.1.4 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD , the floppy disk or the USB flash disk that contains the updated BIOS file.

  • Page 45: Recovering The Bios From The Support Cd

    BIOS file. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “I220GC.ROM”. Completed. Start flashing... DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! Restart the system after the utility completes the updating process.

  • Page 46: Recovering The Bios From The Usb Flash Disk

    Restart the system after the utility completes the updating process. • Only the USB flash disk with FAT 32/16 format and single partition can support ASUS CrashFree BIOS 3. The device size should be smaller than 8GB. • DO NOT shut down or reset the system while updating the BIOS! Doing so...

  • Page 47: Asus Update Utility

    2.1.5 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows environment. The ASUS Update utility allows you ® • Save the current BIOS file • Download the latest BIOS file from the Internet •...
  • Page 48 To update the BIOS through the Internet: Launch the ASUS Update utility from the Windows desktop by clicking Start ® > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from Select the ASUS FTP site nearest...
  • Page 49 To update the BIOS through a BIOS file: Launch the ASUS Update utility from the Windows desktop by clicking Start ® > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from a file option from the drop-down menu, then click Next.

  • Page 50: Bios Setup Program

    • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. Make sure to choose the right BIOS files according to the version of your mother board. Refer to your Printed Circuit Board (PCB) for version information.

  • Page 51: Bios Menu Screen

    At the bottom right corner of a menu screen are the navigation keys for that particular menu. Use the navigation keys to select items in the menu and change the settings. Some of the navigation keys differ from one screen to another. ASUS I220GC 2-13...

  • Page 52: Menu Items

    2.2.4 Menu items The highlighted item on the menu bar BIOS SETUP UTILITY Main Advanced Power Boot Tools Exit displays the specific items for that menu. System Time [19:34:30] Use [ENTER], [TAB] or System Date [Fri 03/28/2008] Legacy Diskette A [1.44M, 3.5 in] [SHIFT-TAB] to select a field.

  • Page 53: Main Menu

    Allows you to set the system date. 2.3.3 Legacy Diskette A [1.44M, 3.5 in.] Sets the type of floppy drive installed. Configuration options: [Disabled] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.] ASUS I220GC 2-15...

  • Page 54: Primary, Third And Fourth Ide Master/Slave

    2.3.4 Primary, Third and Fourth IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information. Primary IDE Master Select the type of device connected...

  • Page 55: Ide Configuration

    Disables or allows selection of the IDE operation mode depending on the operating system (OS) that you installed. Set to Enhanced Mode if you are using native OS, such as Windows XP/Vista. ® Configuration options: [Disabled] [Compatible Mode] [Enhanced Mode] ASUS I220GC 2-17...

  • Page 56: System Information

    Enhanced Mode Support On [S-ATA] The default setting S-ATA allows you to use native OS on Serial ATA and Parallel ATA ports. We recommend that you do not change the default setting for better OS compatibility. In this setting, you may use legacy OS on the Parallel ATA ports only if you did not install any Serial ATA device.

  • Page 57: Advanced Menu

    Allows selection of CPU frequency and auto adjustment of relevant parameters. Frequencies higher than CPU manufacturer recommends are not guaranteed to be stable. If the system becomes unstable, return to the default. Configuration options: [Manual] [Auto] [Overclock Profile] ASUS I220GC 2-19...
  • Page 58 The following item appears only when you set the AI Overclocking item to [Manual]. CPU Frequency [XXX] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to adjust the CPU frequency.

  • Page 59: Usb Configuration

    Allows you to enable or disable the USB 2.0 controller. Configuration options: [Enabled] [Disabled] USB 2.0 Controller Mode [HiSpeed] Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed] ASUS I220GC 2-21...

  • Page 60: Cpu Configuration

    2.4.3 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. BIOS SETUP UTILITY Advanced Configure advanced CPU settings Disabled for Windows XP Module Version: 3D.06 Manufacturer: Intel Brand String: Intel(R) Celeron(R) CPU @ 1.20GHz Frequency : 1.20GHz FSB Speed...

  • Page 61: Chipset

    Sets the RAS Activate timing to Precharge timing. Configuration options: [4 Clock] [5 Clocks] ~ [18 Clocks] DRAM Write Recovery Time [4 Clocks] Sets the DRAM Write Recover Time. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] [6 Clocks] ASUS I220GC 2-23...
  • Page 62 Hyper Path 3 [Auto] Sets this item to enabled to reduce bottlenecks of memory bandwidth. Sets it to disabled for safe mode. Configuration options: [Disabled] [Enabled] [Auto] DRAM Throttling Threshold [Auto] Allows you to enable DRAM Thermal Throttling to make your system more stable. Configuration options: [Disabled] [Auto] Boot Graphic Adapter Priority [PCI/Int-VGA] Allows selection of the graphics controller to use as primary boot device.

  • Page 63: Onboard Devices Configuration

    Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] Parallel Port Address [378] Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378] [278] [3BC] ASUS I220GC 2-25...

  • Page 64: Pci Pnp

    Parallel Port Mode [ECP] Allows you to select the Parallel Port mode. Configuration options: [Normal] [Bi-Directional] [EPP] [ECP] ECP Mode DMA Channel [DMA3] Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set the Parallel Port ECP DMA. Configuration options: [DMA0] [DMA1] [DMA3] Parallel Port IRQ [IRQ7] Configuration options: [IRQ5] [IRQ7]...
  • Page 65 IRQ-xx assigned to [PCI Device] When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] ASUS I220GC 2-27...

  • Page 66: Power Menu

    Power menu The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options. BIOS SETUP UTILITY Main Advanced Power...

  • Page 67: Apm Configuration

    Thus, connection cannot be made on the first try. Turning an external modem off and then back on while the computer is off causes an initialization string that turns the system power on. ASUS I220GC 2-29...
  • Page 68 Power On By PCI Devices [Disabled] When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN or modem card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled] Power On By PCIE Devices [Disabled] When set to [Enabled], this parameter allows you to turn on the system through a...

  • Page 69: Hardware Monitor

    (RPM). If the fan is not connected to the chassis, the specific field shows N/A. Configuration options: [Ignored] [N/A] VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. ASUS I220GC 2-31...

  • Page 70: Boot Menu

    Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. BIOS SETUP UTILITY Main Advanced Power Boot Tools Exit Specifies the Boot Boot Settings Device Priority sequence.

  • Page 71: Boot Settings Configuration

    This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Set this item to [Enabled] to use the ASUS MyLogo2™ feature. AddOn ROM Display Mode [Force BIOS] Sets the display mode for option ROM.

  • Page 72: Security

    Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled] 2.6.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options. Security Settings <Enter>...

  • Page 73: Change User Password

    The message “Password Installed” appears after you set your password successfully. To change the user password, follow the same steps as in setting a user password. Clear User Password Select this item to clear the user password. ASUS I220GC 2-35...

  • Page 74: Tools Menu

    (C)Copyright 1985-2007, American Megatrends, Inc. ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice. See section 2.1.2 for details.

  • Page 75: Exit Menu

    If you attempt to exit the Setup program without saving your changes, the program prompts you with a message asking if you want to save your changes before exiting. Press <Enter> to save the changes while exiting. ASUS I220GC 2-37...

  • Page 76: Discard Changes

    Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to fields other than System Date, System Time, and Password, the BIOS asks for a confirmation before exiting. Discard Changes This option allows you to discard the selections you made and restore the previously saved values.

  • Page 77: Chapter 3: Software Support

    This chapter describes the contents of the support CD that comes with the motherboard package. Software support...

  • Page 78: Installing An Operating System

    The contents of the support CD are subject to change at any time without notice. Visit the ASUS website(www.asus.com) for updates. 3.2.1 Running the support CD Place the support CD to the optical drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer.

  • Page 79: Drivers Menu

    Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstallAll driver installation wizard. Intel Chipset Driver This item installs the Intel Chipset INF Update Program.

  • Page 80: Utilities Menu

    ASUS InstAll - Installation Wizard for Utilities Launches the ASUS InstallAll utilities installation wizard. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in a Windows environment. This utility requires an Internet connection either through a ®...
  • Page 81 TV and movies, capturing videos, or playing games in your computer. Visit the Microsoft website (www.microsoft.com) for updates. ASUS Motherboard Installation Guide Click to open the ASUS Motherboard Installation Guide. The installation guide is in Portable Document Format (PDF). Install the Adobe...

  • Page 82: Asus Contact Information

    3.2.4 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. Chapter 3: Software support...

Table of Contents