Table of Contents
Advertisement
Default Settings
Parameter
Username
Password
LAN IP
DHCP Range
3
Installing the WRV210
Placement Options
You can place the router horizontally on a desktop or mount it on the wall.
Desktop Option
For desktop placement, place the router horizontally on a surface so it sits
on its four rubber feet.
Wall Option
To mount the router on the wall, follow these steps.
Determine where you want to mount the router.
S
1
TEP
Install two screws (not supplied) 2-9/16 in. apart (approximately
S
2
TEP
6.45 cm.) Leave about 1/8 in. (about 3 mm) of the head exposed.
With the back panel pointing up (if installing vertically), position the
S
3
TEP
router so that the wall-mount crisscross slots on the bottom panel
line up with the two screws.
Place the wall-mount slots over the screws and slide the router
S
4
TEP
down until the screws fit snugly into the wall-mount slots.
Cisco Small Business WRV210 Quick Start Guide
Value
admin
admin
192. 1 68. 1 . 1
192. 1 68. 1 . 1 00 to 192. 1 68. 1 .253
Wall
mount
slots
2-9/16
3
Advertisement
Table of Contents
