hit counter script
Cisco CISCO7204VXR Installation And Configuration Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. CISCO7204VXR
  6. Installation and configuration manual
Cisco CISCO7204VXR Installation And Configuration Manual

Cisco CISCO7204VXR Installation And Configuration Manual

Installation guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Cisco 7200 VXR Installation and
Configuration Guide
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Customer Order Number:
Text Part Number: OL-5013-08

Advertisement

Table of Contents
loading

Related Manuals for Cisco CISCO7204VXR

Summary of Contents for Cisco CISCO7204VXR

  • Page 1 Cisco 7200 VXR Installation and Configuration Guide Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Customer Order Number: Text Part Number: OL-5013-08...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...

  • Page 3: Table Of Contents

    Cisco 7204VXR Overview Cisco 7206VXR Overview Field-Replaceable Units 1-10 Network Processing Engine or Network Services Engine 1-11 Input/Output Controller 1-32 LED Descriptions 1-40 NPE-G2 LEDs 1-41 NPE-G1 LEDs 1-42 Input/Output Controller C7200-I/O LEDs 1-43 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 4 Checking the Shipping Container Contents 2-12 Site Log 2-13 Installing a Cisco 7200 VXR Router C H A P T E R Rack-Mounting a Cisco 7200 VXR Router Attaching the Chassis Rack-Mount and Cable-Management Brackets Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 5 Starting the System and Observing Initial Conditions Configuring a Cisco 7200 VXR Router Performing a Basic Configuration Using AutoInstall Performing a Basic Configuration Using the Setup Facility Configuring Global Parameters Configuring the Native Gigabit Ethernet Interfaces Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 6 Troubleshooting the NPE-G1 or NPE-G2 Troubleshooting the Network Processing Engine or Network Services Engine Troubleshooting the Port Adapter Jacket Card Troubleshooting the Port Adapters or Service Adapters Troubleshooting the Cooling Subsystem 5-10 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 7 Bit 11 and Bit 12 Bit 13 Bit 15 Displaying the Configuration Register While Running Cisco IOS Displaying the Configuration Register While Running ROM Monitor Setting the Configuration Register While Running Cisco IOS Setting the Configuration Register While Running ROM Monitor...
  • Page 8 Contents Cisco 7200 VXR Installation and Configuration Guide viii OL-5013-08...

  • Page 9: Preface

    See “Product Documentation DVD” section on page xvii for more information. You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com. Translated documentation is available at http://www.cisco.com/public/countries_languages.shtml. Audience...

  • Page 10: Organization

    Preface Organization the Cisco 7200 VXR routers. It contains procedures for unpacking and installing the router hardware, creating a basic software configuration file, and starting up the router. After completing the installation and basic configuration procedures covered in this guide, you will then use the appropriate companion publications to more completely configure your system.
  • Page 11 Document Conventions screen screen boldface screen boldface screen italic screen italic screen The symbol ^ represents the key labeled Control—for example, the key combination ^D Control < > Nonprinting characters, such as passwords, are in angle brackets. Default responses to system prompts are in square brackets. !, # An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.

  • Page 12: Warning Definition

    Tässä asiakirjassa esitettyjen varoitusten käännökset löydät laitteen mukana toimitetuista ohjeista. Huomautus SÄILYTÄ NÄMÄ OHJEET Huomautus Tämä asiakirja on tarkoitettu käytettäväksi yhdessä tuotteen mukana tulleen asennusoppaan kanssa. Katso lisätietoja asennusoppaasta, kokoonpano-oppaasta ja muista mukana toimitetuista asiakirjoista. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 13 Nota CONSERVARE QUESTE ISTRUZIONI Nota La presente documentazione va usata congiuntamente alla guida di installazione specifica spedita con il prodotto. Per maggiori informazioni, consultare la Guida all'installazione, la Guida alla configurazione o altra documentazione acclusa. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 14 OBS! SPARA DESSA ANVISNINGAR OBS! Denna dokumentation ska användas i samband med den specifika produktinstallationshandbok som medföljde produkten. Se installationshandboken, konfigurationshandboken eller annan bifogad ytterligare dokumentation för närmare detaljer. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 15: Terms And Acronyms

    CWDM GBIC—Coarse Wavelength-Divison Multiplexing Gigabit Interface Converter • DCE—data communications equipment • DMA—direct memory access • DRAM—dynamic random-access memory • DTE—data terminal equipment • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 16: Related Documentation

    Related Documentation Your Cisco 7200 VXR router and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources: •...

  • Page 17: Obtaining Documentation

    Obtaining Documentation Obtaining Documentation Cisco.com Product Documentation DVD DOC-DOCDVD=) from Cisco Marketplace at this URL: http://www.cisco.com/go/marketplace/ Ordering Documentation tech-doc-store-mkpl@external.cisco.com or by fax at 1 408 519-5001 in the United States and Canada, or elsewhere at 011 408 519-5001.

  • Page 18: Documentation Feedback

    Documentation Feedback Documentation Feedback Cisco Product Security Overview • • • Reporting Security Problems in Cisco Products • • • •...

  • Page 19: Obtaining Technical Assistance

    Technical Support & Documentation website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.

  • Page 20: Submitting A Service Request

    For a complete list of Cisco TAC contacts, go to this URL: http://www.cisco.com/techsupport/contacts To ensure that all service requests are reported in a standard format, Cisco has established severity definitions. Severity 1 (S1)—Your network is “down,” or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
  • Page 21 Obtaining Additional Publications and Information • • iQ Magazine • technology investment decisions. You can access iQ Magazine at this URL: http://www.cisco.com/go/iqmagazine or view the digital edition at this URL: http://ciscoiq.texterity.com/ciscoiq/sample/ Internet Protocol Journal Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 23: Chapter 1 Cisco 7200 Vxr Product Overview

    Cisco 7200 VXR Product Overview • • • • • • Warning Before you install, operate, or service the system, read the “Site Preparation and Safety” section of the Regulatory Compliance and Safety Information for the Cisco 7200 Series Routers Statement 200 Physical Description...

  • Page 24: Router

    Downloadable software—Allows you to load new images into Flash memory remotely, without having to physically access the router, for fast, reliable upgrades. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 25 Table 1-1 Physical Specifications Specification • • • controller, maximum number of port adapters, 2 power supplies, and a fan tray: ~ 50 lb (22.7 kg) Heat dissipation 370W (1262 BTU Chassis fan noise Tested: levels—single speed Front (I/O controller and port adapter side) 44.2 dB Back (power supply side) 43.7 dB Left (fan side) 47.2 dB Right 44.8 dB...

  • Page 26: Software Requirements

    4. VAC = volts alternating current 5. A = amperes 6. Hz = hertz 7. AWG = American Wire Gauge 8. VDC = volts direct current Note Software Requirements • • • • • • • • Cisco 7204VXR Overview...
  • Page 27 Cisco 7204VXR Overview Note Figure 1-1 Cisco 7204VXR Router—Front View Cisco 7200 SERIES ETHERNET-10BFL SERIAL-EIA/TIA-232 FAST ETHERNET INPUT/OUTPUT CONTROLLER...
  • Page 28 NETWORK PROCESSING ENGINE-300 PWR OK LED AC power cable-retention clip...

  • Page 29: Cisco 7206Vxr Overview

    Cisco 7206VXR Overview Caution Note Cisco 7206VXR Overview Note...
  • Page 30 Chapter 1 Cisco 7200 VXR Product Overview Cisco 7206VXR Overview Note Figure 1-3 Cisco 7206VXR Router—Front View ETHERNET-10BFL FAST ETHERNET INPUT/OUTPUT CONTROLLER Cisco 7200 Series VXR Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 31 Figure 1-4 Cisco 7206VXR Router—Rear View NETWORK PROCESSING ENGINE-300...

  • Page 32: Field-Replaceable Units

    Field-Replaceable Units Caution Note Field-Replaceable Units • • • • • • • 1-10...

  • Page 33: Network Processing Engine Or Network Services Engine

    Network Processing Engine or Network Services Engine Note Network Processing Engine and Network Services Engine Installation and Configuration – – a BCM 1250 microprocessor that operates at an internal clock speed of 700 MHz. – – – – Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 34 – – – – – – – – – – – – – – – – 1-12...
  • Page 35 – – – – – – – – – – – 1-13...
  • Page 36 1-14...
  • Page 37 Figure 1-5 NPE-G2 Table 1-2 NPE-G2 Memory Specifications Component Location Memory Type Size Quantity Description on the NPE-G2 Board 1-15...
  • Page 38 G B I C R J 4 5 G B I C R J 4 5 G B I C C O M PA C T F L A S H CONSOLE Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 39 Cisco 7200 VXR Product Overview Field-Replaceable Units Component Location on the NPE-G1 Memory Type Size Quantity Description Board NPE-G1 SDRAM SODIMM Memory Configurations—Configurable Memory Only Total SDRAM SDRAM Bank Quantity Product Number Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 40 Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Memory Type Size Quantity Description Location Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 41 1 256-MB DIMM MEM-SD-NSE-256MB= Figure 1-8 NPE-400 Temperature sensor (U31) Midplane connector Keying post Boot ROM (U7) RM7000 microprocessor Temperature sensor System controller SODIMM (J1) Captive installation screw Standoff and screw Handle Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 42 Table 1-8 lists the NPE-400 memory specifications, and Table 1-9 lists factory-installed SDRAM configurations and their product numbers. SDRAM-configurable 128, 256, or 128-, 256-, or 512-MB 512 MB SODIMM Boot ROM 512 KB ROM for the ROM monitor program Primary cache 16 KB —...
  • Page 43 Figure 1-9 NPE-300 Midplane connectors RM7000 microprocessor Keying post Temperature sensor (U42) DIMM 3 (U44) Keying post Bank 1 (user configurable) Temperature sensor DIMM 2 (U45) Boot ROM (U1) Captive installation screw DIMM 0 (U16) Handle Bank 0 (fixed size) System controllers U15 never populated Table 1-10...
  • Page 44 1-9. 2. Bank 0 is used exclusively for packet memory and is not user configurable. 3. Bank 1 contains the Cisco IOS software, processor memory, and packet memory. 4. OTP = one-time programmable The NPE-300 contains two banks of SDRAM. Both SDRAM banks are used for all packet memory requirements;...
  • Page 45 Network controller board Handle System controller Midplane connectors Processor engine board Boot ROM (U1) Captive installation screw Temperature sensor RM5271 microprocessor SDRAM DIMM (U15) Table 1-12 lists the NPE-225 memory specifications, and Table 1-13 lists factory-installed SDRAM configurations and their product numbers.

  • Page 53: Show Version

    Image text-base:0x600089B8, data-base:0x6196E000 ROM:System Bootstrap, Version 12.2(20011219:132854) (display text omitted) cisco 7206VXR (NPE-G1) processor (revision 0x00) with 245760K/16384K bytes of memory. Processor board ID 13250983 BCM12500 CPU at 500Mhz, Implementation 1, Rev 0.1, 512KB L2 Cache 6 slot VXR midplane, Version 2.0...
  • Page 54 2. The I/O controller with the Product Number C7200-I/O-FE-MII has a single MII Fast Ethernet receptacle only. Although still supported by Cisco Systems, this I/O controller with a single MII receptacle is no longer an orderable product as of May 1998.
  • Page 55 C7200-I/O-GE+E—With GBIC Gigabit Ethernet and RJ-45 Ethernet Receptacles ETHERNET GIGABIT ETHERNET INPUT/OUTPUT CONTROLLER C7200-I/O-GE+E Figure 1-16 C7200-I/O-2FE/E—With Two RJ-45 Ethernet/Fast Ethernet Receptacles...
  • Page 56 DUAL FAST ETHERNET INPUT/OUTPUT CONTROLLER C7200-I/O-2FE/E 11 12...
  • Page 57 Figure 1-17 C7200-I/O-FE—With MII and RJ-45 Fast Ethernet Receptacles (Version 1)
  • Page 58 Figure 1-18 C7200-I/O-FE—With MII and RJ-45 Fast Ethernet Receptacles (Version 2)
  • Page 59 Figure 1-19 C7200-I/O—Without Fast Ethernet Port (Version 1)
  • Page 60 Figure 1-20 C7200-I/O—Without Fast Ethernet Port (Version 2)
  • Page 61 Figure 1-21 C7200-I/O-FE-MII—With Single MII Fast Ethernet Receptacle...

  • Page 62: Led Descriptions

    Flash memory 16 or Up to 2 Contains the default All models PC Card slot 0 card 20 MB Cisco IOS image and slot 1 Flash Disk 32, 48, or Up to 2 128 MB NVRAM 128 KB Nonvolatile EPROM...
  • Page 63 Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Caution Note I/O Controller LEDs Color Function NPE-G2 LEDs LED Label Color Status in the Power Up State Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 64 RJ-45 and Green GBIC ports EN (Enable), RJ-45 ports Green 0/1, 0/2, 0/3 only SLOT ACTIVE CompactFlash Green On when the slot is being used. Disk POWER ON Green On and stays on. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 65: Input/Output Controller C7200-I/O-Ge+E Leds

    Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Input/Output Controller C7200-I/O LEDs C7200-I/O LEDs and CPU Reset Button Input/Output Controller C7200-I/O-GE+E LEDs Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 66: Input/Output Controller C7200-I/O-2Fe/E Leds

    Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units ETHERNET GIGABIT ETHERNET INPUT/OUTPUT CONTROLLER C7200-I/O-GE+E Color Function Input/Output Controller C7200-I/O-2FE/E LEDs DUAL FAST ETHERNET INPUT/OUTPUT CONTROLLER C7200-I/O-2FE/E Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 67: Input/Output Controller C7200-I/O-Fe Leds

    Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Color Function Note Input/Output Controller C7200-I/O-FE LEDs Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 68 Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Color Function Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 69: Input/Output Controller C7200-I/O-Fe-Mii Leds

    Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Note Input/Output Controller C7200-I/O-FE-MII LEDs Color Function Port Adapters and Service Adapters Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 70: Port Adapter Jacket Card

    Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Note Note PA-4E Ethernet 10BaseT Port Adapter Installation and Configuration Port Adapter Jacket Card Port Adapter Jacket Card PORT ADAPTER JACKET CARD Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 72 Figure 1-28 Cisco 7200 Series AC-Input Power Supply Figure 1-29 Cisco 7200 Series DC-Input Power Supply...

  • Page 74: Compactflash Disks, Flash Disks, And Pc Cards

    Cisco 7200 Series VXR CompactFlash Disks, Flash Disks, and PC Cards Note Using Note the Flash Disk Memory Replacement Instructions for the Network Processing Engine or Network Services Engine and Input/Output Controller Network Processing Engine or Network Services Engine Installation...

  • Page 75: Rack-Mount And Cable-Management Kit

    Memory Size Product Number Memory Size Product Number Memory Size Product Number Rack-Mount and Cable-Management Kit...

  • Page 76: Chassis

    Chapter 1 Cisco 7200 VXR Product Overview Functional Overview Functional Overview Chassis Slot and Logical Interface Numbering Cisco 7200 SERIES ETHERNET-10BFL SERIAL-EIA/TIA-232 FAST ETHERNET INPUT/OUTPUT CONTROLLER Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 77 Chapter 1 Cisco 7200 VXR Product Overview Functional Overview ETHERNET-10BFL FAST ETHERNET INPUT/OUTPUT CONTROLLER Cisco 7200 Series VXR Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 78 FastEthernet5/0 is up, line protocol is up Hardware is DEC21140, address is 0000.0000.0000 (bia 0000.0000.0000) Internet address is 00.00.00.00/00 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 79 Router# show interface fastethernet 5/0...

  • Page 81: Environmental Monitoring And Reporting Functions

    Chapter 1 Cisco 7200 VXR Product Overview Functional Overview Environmental Monitoring and Reporting Functions Environmental Monitoring • • • • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 82 Cisco 7200 VXR Product Overview Functional Overview NPE-G2 Low Warning High Warning Shutdown NPE-G1 Low Warning High Warning Shutdown Parameter High Warning High Critical Shutdown NPE-175, NPE-225, NPE-300, NPE-400, NSE-1 NPE-100 or NPE-200 NPE-150 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 83 00:00:44:%ENVM-4-ENVWARN:+3.45 V measured at +3.57 Router(boot)# 00:04:49:%ENVM-4-ENVWARN:+5.15 V measured at +5.33 12.0(23), Cisco IOS Release 12.3(8), and Later Releases of Each...

  • Page 84: Reporting Functions

    Reporting Functions show environment show environment all show environment last, show environment table show environment show environment show environment show environment show environment last...
  • Page 85 show environment last show environment last show environment table...
  • Page 86 show environment all Power Supply 2 is Zytek AC Power Supply. Unit is on. Temperature readings: chassis inlet measured at 26C/78F chassis outlet 1 measured at 28C/82F chassis outlet 2 measured at 29C/84F chassis outlet 3 measured at 33C/91F Voltage readings: +3.45 V measured at +3.46 V +5.15 V...

  • Page 87: Preparing For Installation

    Before you install, operate, or service the system, read the “Site Preparation and Safety” section of the Warning Regulatory Compliance and Safety Information for the Cisco 7200 Series Routers. This guide contains important safety information you should know before working with the system. Statement 200...

  • Page 88: Electrical Equipment Guidelines

    Electrical Equipment Guidelines • • • • • • • • • • • • Electrical Equipment Guidelines Caution Preventing Electrostatic Discharge Damage...

  • Page 89: Chapter 2 Preparing For Installation

    Chapter 2 Preparing for Installation Site Requirement Guidelines Site Requirement Guidelines Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 90 Chapter 2 Preparing for Installation Site Requirement Guidelines • • • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 91: Rack-Mounting Guidelines

    Chapter 2 Preparing for Installation Site Requirement Guidelines Rack-Mounting Guidelines • • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 92 Chapter 2 Preparing for Installation Site Requirement Guidelines Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 93: Temperature And Humidity Requirements

    Chapter 2 Preparing for Installation Site Requirement Guidelines • Caution • • • Note Temperature and Humidity Requirements Specifications for Operating and Nonoperating Environments Specification Minimum Maximum Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 94: Power Connection Guidelines

    Chapter 2 Preparing for Installation Site Requirement Guidelines Power Connection Guidelines • • Note Plant Wiring Guidelines Interference Considerations • • Note Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 95: Distance Limitations And Interface Specifications

    Chapter 2 Preparing for Installation Initial Configuration Information Distance Limitations and Interface Specifications Note • • • • • PA-A3 Enhanced ATM Port Adapter Installation and Configuration Initial Configuration Information Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 96: Cisco 7200 Vxr Router Installation Checklist

    For complete configuration instructions, refer to the and the , which are available on Cisco.com or on the Documentation DVD. To assist you with your installation and to provide a historical record of what was done by whom, use...
  • Page 97 Date router received Router and all accessories unpacked Types and numbers of interfaces verified Safety recommendations and guidelines reviewed Installation Checklist copied Site log established and background information entered Site power voltages verified Site environmental specifications verified Required passwords, IP addresses, device names, and so on, available Required tools available Network connection equipment available Router mounted in rack (optional)
  • Page 98 Do not discard the shipping container. You need the container if you move or ship the Cisco 7200 VXR router in the future. Verify that the following are included in the shipping container (the accessories box might be separate):...

  • Page 99: Site Log

    Site Log A site log provides a historical record of all actions relevant to the Cisco 7200 VXR router operation and maintenance. Keep your site log in a common place near the chassis where anyone who performs tasks has access to it. Site log entries might include the following: Installation progress—Make a copy of the Cisco 7200 VXR Router Installation Checklist and insert...
  • Page 100 Table 2-4 on page 2-14 shows a sample site log page. Make copies of the sample or design your own site log to meet the needs of your site and equipment. Description of Action Performed or Symptom Observed Initials...
  • Page 101 Note Caution Before you install, operate, or service the system, read the “Site Preparation and Safety” Warning . This guide contains important safety information you should know before working with the system. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 102: Chapter 3 Installing A Cisco 7200 Vxr Router

    Chapter 3 Installing a Cisco 7200 VXR Router Rack-Mounting a Cisco 7200 VXR Router Rack-Mounting a Cisco 7200 VXR Router Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 103 Typical Four-Post Equipment Rack Posts and Mounting Strips...
  • Page 104 Figure 3-2 Installing the Chassis in a Four-Post Rack—Front Installation Shown ETHERNET-10BFL Cisco 7200 FAST ETHERNET INPUT/OUTPUT CONTROLLER XVR eries...
  • Page 105 ETHERNET-10BFL Cisco 7200 FAST ETHERNET INPUT/OUTPUT CONTROLLER Series VXR...
  • Page 106 ETHERNET-10BFL Cisco 7200 FAST ETHERNET INPUT/OUTPUT CONTROLLER Series...

  • Page 107: Attaching The Chassis Rack-Mount And Cable-Management Brackets

    ETHERNET-10BFL FAST ETHERNET INPUT/OUTPUT CONTROLLER Cisco 7200 Series Attaching the Chassis Rack-Mount and Cable-Management Brackets...

  • Page 108: Installing The Brackets On The Front Of The Chassis

    Rack-Mounting a Cisco 7200 VXR Router Installing the Brackets on the Front of the Chassis Step 1 Step 2 Step 3 ETHERNET-10BFL FAST ETHERNET INPUT/OUTPUT CONTROLLER Cisco 7200 Series VXR Step 4 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 109: Installing The Npe-G1 And Npe-G2 Cable-Management Brackets On A Front-Mounted Router

    Installing a Cisco 7200 VXR Router Rack-Mounting a Cisco 7200 VXR Router ETHERNET-10BFL FAST ETHERNET INPUT/OUTPUT CONTROLLER Cisco 7200 Series Step 5 Installing the NPE-G1 and NPE-G2 Cable-Management Brackets on a Front-Mounted Router • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 110 G B I C R J 4 5 POWER G B I C C O M PA C T F L A S H CONSOLE Step 1 Step 2 Step 3 Step 4 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 111: Installing The Npe-G1 And Npe-G2 Optical Cable-Management Bracket

    C O M PA C T F L A S H CONSOLE Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Installing the Brackets on the Rear of the Chassis Step 1 Step 2 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 112 Rack-Mounting a Cisco 7200 VXR Router ETHERNET-10BFL Cisco 7200 FAST ETHERNET INPUT/OUTPUT CONTROLLER Series ETHERNET-10BFL Cisco 7200 FAST ETHERNET INPUT/OUTPUT CONTROLLER Series Step 3 Step 4 Step 5 Step 6 Step 7 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 113: Installing The Npe-G1 And Npe-G2 Cable-Management Brackets On A Rear-Mounted Router

    R J 4 5 G B I C R J 4 5 G B I C POWER C O M PA C T F L A S H CONSOLE Step 1 Step 2 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 114: Installing The Chassis In The Rack

    Installing a Cisco 7200 VXR Router General Tabletop or Workbench Installation Installing the Chassis in the Rack Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 General Tabletop or Workbench Installation • • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 115: Installing The Cable-Management Brackets

    Installing a Cisco 7200 VXR Router Installing the Cable-Management Brackets • • • • Note Step 1 Step 2 Step 3 Step 4 Step 5 Installing the Cable-Management Brackets Step 1 Step 2 Step 3 Step 4 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 116: Securing The Port Adapter Cables

    Installing a Cisco 7200 VXR Router Installing the Cable-Management Brackets Note Securing the Port Adapter Cables Note Step 1 Step 2 Note Step 3 ETHERNET-10BFL FAST ETHERNET INPUT/OUTPUT CONTROLLER Cisco 7200 Series Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 117: Attaching A Chassis Ground Connection

    Chapter 3 Installing a Cisco 7200 VXR Router Attaching a Chassis Ground Connection Step 4 Attaching a Chassis Ground Connection • • • • • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 118 Chapter 3 Installing a Cisco 7200 VXR Router Attaching a Chassis Ground Connection Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 119: Connecting Port Adapter Cables

    Connecting Port Adapter Cables Connecting Port Adapter Cables Connecting I/O Controller, NPE-G1, or NPE-G2 Cables Note Connecting to Gigabit Ethernet Slots and Ports • • • Form-Factor Pluggable (SFP) GBIC Module Installation Instructions and Specifications Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 120: Gigabit Ethernet Sfp Module Connections

    Connecting I/O Controller, NPE-G1, or NPE-G2 Cables Gigabit Ethernet SFP Module Connections Because invisible laser radiation may be emitted from the aperture of the port when no cable is Warning connected, avoid exposure to laser radiation and do not stare into open apertures. Statement 70 CLASS 1 LASER PRODUCT LASERPRODUKT DER KLASSE 1 PRODUIT LASER DE CLASSE 1...
  • Page 121 Chapter 3 Installing a Cisco 7200 VXR Router Connecting I/O Controller, NPE-G1, or NPE-G2 Cables Specification Description • • • Note Note Note Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 122 5. For fiber types 9/125 m SMF, 62.5/125 m MMF, and 50/125 m MMF. µ µ 6. For fiber types 50/125 m MMF and 62.5/125 m MMF. µ 7. For fiber type 10 m SMF. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 123: Mode-Conditioning Patch Cord Description

    Specifically, the mode-conditioning patch cord is composed of a single-mode optical fiber permanently coupled off-center (see Offset in Figure 3-17) to a graded-index multimode optical fiber. Figure 3-17 shows a diagram of the mode-conditioning patch cord assembly. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 124: Gigabit Ethernet Gbic Connections

    (RX). For duplex connectors, one cable that has both TX and RX connectors is required. You can use either simplex or duplex connectors for the C7200-I/O-GE+E or the NPE-G1. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 125 Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is Warning connected, avoid exposure to laser radiation and do not stare into open apertures. Warning Class 1 laser product. Statement 1008 Class 1 LED product. Gigabit Ethernet GBIC Product Number Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 126: Gbic Cabling And Connection Equipment

    Description GBIC Type Gigabit Ethernet GBIC Product Number GBIC Product Number • • • CWDM GBIC Product Number • • • • • • • • Note GBIC Cabling and Connection Equipment Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 127 GBIC (nm) Fiber Type (micron) (MHz/km) Cable Distance Transmit Power Receive Power GBIC Minimum Maximum Minimum Maximum Power Budget µ µ µ µ µ µ µ µ µ µ µ µ µ Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 128: Mode-Conditioning Patch Cord Description

    Chapter 3 Installing a Cisco 7200 VXR Router Connecting I/O Controller, NPE-G1, or NPE-G2 Cables Note Mode-Conditioning Patch Cord Description Offset Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 129: Gigabit Ethernet Rj-45 Connections On The Npe-G1 And Npe-G2

    Chapter 3 Installing a Cisco 7200 VXR Router Connecting I/O Controller, NPE-G1, or NPE-G2 Cables Note Note Gigabit Ethernet RJ-45 Connections on the NPE-G1 and NPE-G2 10/100 Signal Gigabit Ethernet Signal Note Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 130: Connecting To The I/O Controller Ethernet And Fast Ethernet Ports

    To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Description Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 131 1 TPO+ 1 TP0+ 2 TPO- 2 TP0- 3 TP1+ 3 TP1+ 6 TP1- 6 TP1- 4 TP2+ 4 TP2+ 5 TP2- 5 TP2- 7 TP3+ 7 TP3+ 8 TP3- 8 TP3- Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 132 Ethernet and Fast Ethernet Crossover Cable Pinout, Ethernet Port to a DTE Ethernet port 1 TxD+ 1 TxD+ 2 TxD– 2 TxD– 3 RxD+ 3 RxD+ 6 RxD– 6 RxD– Figure 3-25 Crossover or Straight-Through Cable Identification • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 133: Fast Ethernet Mii Connections

    Chapter 3 Installing a Cisco 7200 VXR Router Connecting I/O Controller, NPE-G1, or NPE-G2 Cables Fast Ethernet MII Connections Figure 3-26 Fast Ethernet Port Connection FAST ETHERNET INPUT/OUTP UT CONTROLLE R Caution Note Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 134: Connecting To The Console And Auxiliary Ports

    22–39 — — — Common (ground) 1, 20, — — — +5.0 volts (V) 21, 40 Tx_CLK and Rx_CLK are provided by the external transceiver. Connecting to the Console and Auxiliary Ports Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 135 Both the console and the auxiliary ports are asynchronous serial ports; any devices connected to these ports must be capable of asynchronous transmission. (Asynchronous is the most common type of serial device; for example, most modems are asynchronous devices.) The I/O controller uses two types of physical media for console port and auxiliary port connections. Table 3-13 describes the I/O controller console and auxiliary port media type for each model.
  • Page 136 Chapter 3 Installing a Cisco 7200 VXR Router Connecting I/O Controller, NPE-G1, or NPE-G2 Cables FAST ETHERNET INPUT/OUTP UT CONTROLLE R DB-25 Console Port Signals and Pinouts Signal Direction Description Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 137: Rj-45 Port Cabling And Pinouts

    Chapter 3 Installing a Cisco 7200 VXR Router Connecting I/O Controller, NPE-G1, or NPE-G2 Cables DB-25 Auxiliary Port Cabling and Pinouts Signal Direction Description Note RJ-45 Port Cabling and Pinouts Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 138 Chapter 3 Installing a Cisco 7200 VXR Router Connecting I/O Controller, NPE-G1, or NPE-G2 Cables ETHERNET GIGABIT ETHERNET INPUT/OUTPUT CONTROLLER C7200-I/O-GE+E Note Note Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 139 Installing a Cisco 7200 VXR Router Connecting I/O Controller, NPE-G1, or NPE-G2 Cables Adapter DTE M/F Pins The female data terminal equipment (FDTE) adapter that is available from Cisco is labeled “Terminal”. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 140 RJ-45 Cable Type DB-25 Adapter End Device RJ-45 Console Port Signals and Pinouts Signal Direction Description RJ-45 Auxiliary Port Signals and Pinouts for the NPE-G2, NPE-G1 and I/O Controllers Signal Direction Description Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 141: Connecting Power

    This unit might have more than one power cord. To reduce the risk of electric shock, disconnect the two power supply cords before servicing the unit. Statement 14 Note Warning The AC power supply has double pole/neutral fusing. Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 142: Connecting Ac-Input Power

    Chapter 3 Installing a Cisco 7200 VXR Router Connecting Power Connecting AC-Input Power Step 1 Step 2 Step 3 Note Step 4 Step 5 Connecting DC-Input Power Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 143 OFF position. Statement 322 Warning When installing the unit, always make the ground connection first and disconnect it last. Statement 42 Caution Step 1 Step 2 Step 3 Step 4 Step 5 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 144 Chapter 3 Installing a Cisco 7200 VXR Router Connecting Power Step 6 Note Step 7 Note Step 8 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 145: Observing System Startup And Performing A Basic Configuration

    Observing System Startup and Performing a Basic Configuration • • • • • • • • Note Checking Conditions Prior to System Startup • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 146: C H A P T E R 4 Observing System Startup And Performing A Basic Configuration

    At any point you may enter a questions mark ‘?’ for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets ‘[]’. continue with configuration dialog? [yes]: Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 147 Security Device Manager (SDM), Version 1.1 User Note for the 7xxx Routers show version show version...

  • Page 148: Performing A Basic Configuration Using Autoinstall

    Performing a Basic Configuration Using AutoInstall Step 1 Step 2 Note copy running-config startup-config Hostname# copy running-config startup-config...
  • Page 149 1986-1998 by cisco Systems, Inc. Compiled Thu 15-Oct-98 02:20 by xxxxx Image text-base: 0x600088C4, data-base: 0x60FA6000 cisco 7206VXR (NPE300) processor with 61440K/20480K bytes of memory. R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache Six slot VXR midplane, Version 2.0 Last reset from power-on Bridging software.

  • Page 150: Configuring Global Parameters

    --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Return Would you like to enter the initial configuration dialog? [yes]: First, would you like to see the current interface summary? [yes]: Any interface listed with OK? value "NO"...
  • Page 151 Your IGRP autonomous system number [1]: 15 router barney betty fred...

  • Page 152: Configuring The Interface Transmission And Speed Modes

    media-type interface command to select the media type, either the GBIC (gbic) for NPE-G1 or SFP (sfp) for NPE-G2, RJ-45 (rj45) port. Changing the Media Type of the Native Gigabit Ethernet GBIC or SFP or RJ-45 Ports the media-type interface command: media-type gbic | sfp | rj45 media-type rj45 Configuring the Interface Transmission and Speed Modes...
  • Page 153 negotiation auto no negotiation auto media-type media-type media-type SFP The following shows a typical configuration for the three Gigabit Ethernet interfaces on the NPE-G1. In this example, the first interface is configured for the GBIC media type, the second interface is configured for the RJ-45 media type, and the third interface is not used.

  • Page 154: Configuring Atm Interfaces

    show interface GigabitEthernet 0/X (where X is 1, 2, or 3) and show controllers GigabitEthernet 0/1 show interface show controller interface. For example, it shows the detected link status, speed, and duplex, and also determines the current status of autonegotiation and the link partners’ abilities (if it is an autonegotiation-capable show controller show controller clear interface GigabitEthernet 0/X...
  • Page 155 Configure IPX on this interface? [no]: IPX network number [2]: Configure AppleTalk on this interface? [no]: Extended AppleTalk network? [no]: AppleTalk starting cable range [0]: Configuring interface parameters: Configuring interface FastEthernet2/0: Is this interface in use? [yes]: Use the 100 Base-TX (RJ-45) connector? [yes]: Operate in full-duplex mode? [no]: Configure IP on this interface? [yes]: IP address for this interface: 1.1.1.20...

  • Page 156: Configuring Synchronous Serial Interfaces

    Configuring Synchronous Serial Interfaces Step 1 1.1.1.30...
  • Page 157 1.1.1.10 1.1.1.20 1.1.1.30 enable secret 5 $1$u8z3$PMYY8em./8sszhzk78p/Y0 enable password betty line vty 0 4 password fred snmp-server community public ip routing no vines routing ipx routing appletalk routing no apollo routing no decnet routing no xns routing no clns routing no bridge 1 ! Turn off IPX to prevent network conflicts.
  • Page 158 half-duplex ip address 1.1.1.20 255.0.0.2 appletalk cable-range 0-0 0.0 appletalk discovery interface serial3/0 ip address 1.1.1.30 255.0.0.3 ip route-cache cbus no keepalive router igrp 15 network 1.0.0.0 Use this configuration? [yes/no]: Building configuration... Use the enabled mode ‘configure’ command to modify this configuration. Press RETURN to get started! Would you like to enter the initial dialog? [yes]: (Router>)
  • Page 159 slot/port Ctrl-Z Control Help copy running-config startup-config show running-config show running-config show startup-config configure...
  • Page 160 2. The Product Number C7200-I/O-FE does not specify MII because both an MII and an RJ-45 receptacle are included. 3. The I/O controller with the Product Number C7200-I/O-FE-MII has a single MII FastEthernet receptacle only. Although still supported by Cisco Systems,...
  • Page 161 This section describes how to recover a lost enable or console login password, and how to replace a lost enable secret password on your Cisco 7200 VXR router. It is possible to recover the enable or console login password. The enable secret password is encrypted, however, and must be replaced with a new enable secret password.
  • Page 162 show version Break Break confreg yes to the enable “ignore system config info?” question, and note the current configuration register settings. Initialize the router by entering the command as follows: The router initializes, the configuration register is set to 0x142, and the router boots the system image from Flash memory and enters the System Configuration Dialog (prompt) as follows: Enter in response to the System Configuration Dialog prompts until the following message is...
  • Page 163 configure memory configure terminal newpassword1 newpassword2 newpassword3 interface fastethernet 0/0 no shutdown config-register 0x2102...

  • Page 164: Viewing Your System Configuration

    System returned to ROM by reload at 00:04:18 UTC Tue Nov 30 1999 System image file is "disk2:c7200-js-mz.dev-test.dec21" cisco 7206VXR (NPE-G1) processor (revision 0x00) with 245760K/16384K bytes of memory. Processor board ID 13250983 BCM12500 CPU at 700Mhz, Implementation 1, Rev 0.1, 512KB L2 Cache 6 slot VXR midplane, Version 2.0...
  • Page 165 Hardware date code :20000413 Top Assy. Part Number :800-07114-01 PCB Serial Number :PROT------- EEPROM format version 4 EEPROM contents (hex): 0x00:04 FF 40 02 15 41 00 00 42 30 31 05 FF 83 01 31 0x10:2E 9D C0 46 03 20 00 1B CA 01 C1 8B 50 52 4F 54 0x20:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x30:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x40:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF...

  • Page 166: Performing Complex Configurations

    Performing Complex Configurations Performing Complex Configurations...

  • Page 167: Troubleshooting Overview

    Troubleshooting the Installation • • • • • Troubleshooting Overview • • • • • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 168: C H A P T E R 5 Troubleshooting The Installation

    Chapter 5 Troubleshooting the Installation Troubleshooting Overview Action Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Problem Solving Using a Subsystems Approach • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 169: Identifying Startup Problems

    Chapter 5 Troubleshooting the Installation Troubleshooting Overview • • Identifying Startup Problems Note Fans Operating Power LEDs Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 170: I/O Controller Leds

    Chapter 5 Troubleshooting the Installation Troubleshooting Overview I/O Controller LEDs Note • • • • Note • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 171: Npe-G1 Or Npe-G2 Leds

    Chapter 5 Troubleshooting the Installation Troubleshooting Overview • • • Note • NPE-G1 or NPE-G2 LEDs • • • • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 172: Port Adapter Jacket Card Leds

    Troubleshooting the Installation Troubleshooting the Power Subsystem • • • Port Adapter Jacket Card LEDs • • Port Adapter LEDs System Bootup Banner Troubleshooting the Power Subsystem • – – – – – Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 173 – – – – – – – –...

  • Page 174: Troubleshooting The Npe-G1 Or Npe-G2

    Troubleshooting the NPE-G1 or NPE-G2 • • • • •...

  • Page 175: Troubleshooting The Processor Subsystem

    Troubleshooting the Installation Troubleshooting the Processor Subsystem Troubleshooting the Network Processing Engine or Network Services Engine Troubleshooting the Port Adapter Jacket Card • • Troubleshooting the Port Adapters or Service Adapters • • Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 176: Troubleshooting The Cooling Subsystem

    Chapter 5 Troubleshooting the Installation Troubleshooting the Cooling Subsystem Troubleshooting the Cooling Subsystem • • Queued messages: %ENVM-1-SHUTDOWN: Environmental Monitor initiated shutdown Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 177 A P P E N D I X Bit No. Meaning...
  • Page 178 Appendix A Configuration Register Information Configuration Bit Meanings Bits 0–3 Bits 0–3 Settings > b [tftp] flash filename Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...
  • Page 179 Action/File Name Bit 3 Bit 2 Bit 1 Bit 0 Bit 6 Bit 7...

  • Page 180: Bit 10 And Bit

    Configuration Register Information Configuration Bit Meanings Bit 8 Bit 10 and Bit 14 Bit 14 Bit 10 IP Address (<net> <host>) Bit 11 and Bit 12 Baud Bit 12 Bit 11 Bit 13 Cisco 7200 VXR Installation and Configuration Guide OL-5013-08...

  • Page 181: Displaying The Configuration Register While Running Cisco Ios

    Appendix A Configuration Register Information Displaying the Configuration Register While Running Cisco IOS Bit 15 Displaying the Configuration Register While Running Cisco IOS Displaying the Configuration Register While Running ROM Monitor Configuration register + 02x100 at last boot Bit# Configuration register option settings:...

  • Page 182: Setting The Configuration Register While Running Cisco Ios

    Appendix A Configuration Register Information Setting the Configuration Register While Running Cisco IOS IP broadcasts with ones Do not use secondary bootstrap Break disabled OEM disabled Ignore configuration disabled Fast boot disabled Fan boot disabled 03-00 Boot to ROM monitor rommon1 >...
  • Page 183 enable “break/abort has effect”? y/n [n]: enable “ignore system config info”? y/n [n]: change console baud rate? y/n [n]: change the boot characteristics? y/n [n]:y enter to boot: 0 = ROM Monitor 1 = the boot helper image 2 - 15 = boot system [0]: 2 Configuration Summary: enabled are:...
  • Page 185 I N D E X IN-1...
  • Page 186 IN-2...
  • Page 187 IN-3...
  • Page 188 IN-4...
  • Page 189 IN-5...
  • Page 190 IN-6...
  • Page 191 IN-7...
  • Page 192 IN-8...

This manual is also suitable for:

C7206vxr/voice/400 - 7206vxr w/ npe-400 voice7200vxr7206vxr7204 - vxr router

Table of Contents