Page 1: Table Of Contents
Obtaining Documentation, page 12 • • Obtaining Technical Assistance, page 14 Obtaining Additional Publications and Information, page 15 • Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Page 2: Scissor-Jack Overview
In addition, review the safety warnings listed in the Regulatory Compliance and Safety Information for the Cisco 12000 Series Internet Router publication that accompanied your router before installing, configuring, or maintaining the router.
Page 3: Preventing Electrostatic Discharge Damage
Pull the metal card carrier out slowly, placing one hand along the bottom of the carrier to guide it straight out of the slot. Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions 78-15717-01...
Page 4: Required Tools And Equipment
Required Tools and Equipment You need the following tools and equipment to use the scissor-jack: ESD-preventive wrist strap • Flat-blade and Phillips screwdrivers • 3/4-in (19-mm) socket and ratchet wrench • Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions 78-15717-01...
Page 5: Using The Scissor-Jack Platform
Using the Scissor-Jack Platform Related Documentation The following publications may be referenced for more information and procedures: Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide • Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions •...
Page 6 (See Figure Figure 3 Transferring the Router to the Scissor-Jack Platform Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions 78-15717-01...
Page 7 With one person positioned on the side of the router to prevent it from tipping, use the 3/4-inch (19-mm) Step 6 socket and ratchet wrench to turn the scissor-jack screw clockwise slowly and close the scissor-jack platform to lower the chassis. (See Figure Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions 78-15717-01...
Page 8 Position the U-shaped pallet body behind the scissor-jack platform with the opening facing the back Step 4 panel of the router. Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions 78-15717-01...
Page 9 Continue turning the scissor-jack screw clockwise to close the scissor-jack platform and lift the base of the scissor-jack platform until the scissor-jack platform is completely closed (the screw can not be turned). Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions 78-15717-01...
Page 10: Regulatory, Compliance, And Safety Information
• Translated Safety Warnings and Agency Approvals The complete list of translated safety warnings and agency approvals is available in the Regulatory Compliance and Safety Information for Cisco 12000 Series Internet Routers publication. (Document Number 78-4347-xx.) Electromagnetic Compatibility Regulatory Statements...
Page 11 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: Turn the television or radio antenna until the interference stops.
Page 12: Obtaining Documentation
These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation on the World Wide Web at this URL: http://www.cisco.com/univercd/home/home.htm Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions...
Page 13: Ordering Documentation
Nonregistered Cisco.com users can order documentation through a local account representative by • calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387). Documentation Feedback You can submit e-mail comments about technical documentation to bug-doc@cisco.com.
Page 14: Obtaining Technical Assistance
The Cisco TAC website is located at this URL: http://www.cisco.com/tac Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL: http://tools.cisco.com/RPF/register/register.do...
Page 15: Obtaining Additional Publications And Information
Obtaining Additional Publications and Information Priority 3 (P3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels. Priority 4 (P4)—You require information or assistance with Cisco product capabilities, installation, or configuration.
Page 16 CCIP, CCSP, the Cisco Arrow logo, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA,...

This manual is also suitable for:

12416 12816

Cisco 12016 Instructions Manual

Quick Links

Related Manuals for Cisco 12016

Summary of Contents for Cisco 12016

This manual is also suitable for:

Table of Contents