Advertisement
Quick Links
OPTIMA
240
OPERATION AND MAINTENANCE MANUAL
ENG
Keep in a safe and accesible place for future reference
Original instructions
SERIAL NUMBER:
YEAR:
DIERREGI S.r.l. - Via Della Scienza, 5
41012 CARPI (MO) - ITALY
MANUAL CODE:
29-20-933240-04
Tel.+39 059 8030103 - Fax.++39 059 8030113
00
RELEASE:
E-Mail: omga@omga.it - Web: www.omga.it
Advertisement
Related Manuals for OMGA OPTIMA 240
Summary of Contents for OMGA OPTIMA 240
- Page 1 Keep in a safe and accesible place for future reference Original instructions SERIAL NUMBER: YEAR: DIERREGI S.r.l. - Via Della Scienza, 5 41012 CARPI (MO) - ITALY MANUAL CODE: 29-20-933240-04 Tel.+39 059 8030103 - Fax.++39 059 8030113 RELEASE: E-Mail: omga@omga.it - Web: www.omga.it...
- Page 2 GENERAL INDEX Table of content Functions of touch screen keys Switching on Calibration PLC diagnostic Storing cut lists Pallets mode Sequence mode Semiautomatic Production GENERAL INFORMATION DIERREGI S.r.l. shall not be held responsible for possible mistakes contained in this manual. DIERREGI S.r.l. shall not be held responsible for any mistakes wich might result from a use other than that described in this manual or caused by improper maintenance.
- Page 3 TABLE OF CONTENT Programs Save as Pallets mode Replace line Sequence mode Insert line Previous page Delete line Virtual keyboard When green, save modifi cations Quality Manual controls Section Home Compose pages inside same program Previous line Next line Increase / Decrease pusher speed Move lines up Confi...
- Page 4 FUNCTIONS OF TOUCH SCREEN KEYS KEYBOARD Every information is entered by keyboard PARAMETERS Password protected functions (Contact service)
- Page 5 FUNCTIONS OF TOUCH SCREEN KEYS DIAGNOSTIC ADMIN NC (Administrator)
- Page 6 FUNCTIONS OF TOUCH SCREEN KEYS DEFECTS Example of board reading with defects 5 - Axis enabled 1 - Machine working 6 - Reading board 2 - Axis enabled 7 - Optimizing according to board length, defects and 3 - Scroll stored boards cutting list.
- Page 7 FUNCTIONS OF TOUCH SCREEN KEYS SHOWING COMMUNICATION SYSTEM TO REA PRINTER (OPTIONAL)
- Page 8 SWITCHING ON Turn PC ON. Starting window will be the one at previous PC OFF. EXAMPLE:...
- Page 9 CALIBRATION Execute Calibration at every machine start. Press START button on machine and confi rm on screen.
- Page 10 CALIBRATION...
- Page 11 PLC DIAGNOSTIC Manual actions...
- Page 12 PLC DIAGNOSTIC 1 - Close vertical clamp 2 - Partial opening vertical clamp 3 - Total opening vertical clamp 4 - Close clamp R1 5 - Partial opening clamp R1 6 - Total opening clamp R1 7 - Close clamp R2 8 - Partial opening clamp R2 9 - Total Opening clamp R2 1 - Parking cycle...
- Page 13 PLC DIAGNOSTIC Diagnostic I/O Green button: enable INPUT Red button: enable OUTPUT...
- Page 14 STORING CUT LISTS Create new program (B) or continue existing program (A).
- Page 15 STORING CUT LISTS A - To modify the open program, use the available keys after highlighting the line to be modifi ed. B - Create a new program...
- Page 16 STORING CUT LISTS With machine for printing (Optional) 2° 1°...
- Page 17 STORING CUT LISTS 1° 2° 3° Confi rm when button turns green.
- Page 18 STORING CUT LISTS 1° 2°...
- Page 19 STORING CUT LISTS 1° 2° In case new pages are needed inside same program (C)
- Page 20 STORING CUT LISTS 3° 1° 2° 1°...
- Page 21 STORING CUT LISTS 2° NOTA: to write in a new line, highlight an empty one. 2° 1° 3°...
- Page 22 STORING CUT LISTS 1° 2° Confi rm with the button...
- Page 23 STORING CUT LISTS...
- Page 24 PALLETS MODE Example with running program 1° 2°...
- Page 25 PALLETS MODE 2° With machine for printing (Optional) 1° 1° 2° 3°...
- Page 26 PALLETS MODE 1° 2°...
- Page 27 PALLETS MODE 1° 2°...
- Page 28 PALLETS MODE 1° 1 2°...
- Page 29 PALLETS MODE 1° 1 2°...
- Page 30 PALLETS MODE 1° 2° Confi rm with the button...
- Page 31 PALLETS MODE...
- Page 32 SEQUENCE MODE...
- Page 33 SEQUENCE MODE 1° 2°...
- Page 34 SEQUENCE MODE With machine for printing (Optional) 1° 2° 1° 2° 3°...
- Page 35 SEQUENCE MODE 1° 3° 2° 1° 2°...
- Page 36 SEQUENCE MODE 1° 2°...
- Page 37 SEQUENCE MODE 1° 2°...
- Page 38 SEQUENCE MODE 1° 2°...
- Page 39 SEQUENCE MODE 1° 2° Confi rm with the button...
- Page 40 SEQUENCE MODE...
- Page 41 SEMIAUTOMATIC 1 - Button mark (Cut on mark) 2 - Button length (Cut to length) 3 - Button delete...
- Page 42 SEMIAUTOMATIC With machine for printing (Optional) 2° 1° 1° 2° 3°...
- Page 43 SEMIAUTOMATIC Press the green START button on the machine cabinet to start working and follow instructions on the screen.
- Page 44 SEMIAUTOMATIC...
- Page 45 SEMIAUTOMATIC With machine for printing (Optional) 1° 2° 3°...
- Page 46 SEMIAUTOMATIC Press the green START button on the machine cabinet to start working and follow instructions on the screen.
- Page 47 PRODUCTION 1° 2° 3°...
- Page 48 PRODUCTION Press the green START button on the machine cabinet to start working and follow instructions on the screen.
- Page 49 PRODUCTION MODIFICATION PREFERENCES ON CUTTING LENGTH Keep red button STOP on machine cabinet for 5 se- conds. 1° 3° 2° GREEN - ACTIVE (selected) RED - NON ACTIVE (deselected) 4° NOTA: this function is available for PALLET, SE- QUENCE and AUTOMATIC mode.
- Page 50 DIERREGI S.r.l. - Via Della Scienza, 5 - 41012 CARPI (MO) - ITALY Tel.+39 059 8030103 - Fax.++39 059 8030113 E-Mail: omga@omga.it - Web: www.omga.it...