Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Programmes ...... 25 1.1 General information.... 4 8.1 Automatic programmes... 25 1.2 Intended use...... 4 8.2 Timed programmes .... 26 1.3 Restriction on user group.. 4 9 Accessories....... 28 1.4 Safe installation ......
Page 3
15 Home Connect ...... 36 21 Customer Service.... 47 15.1 Setting up the Home Con- 21.1 Product number (E-Nr.), nect app ........ 36 production number (FD) and consecutive numbering 15.2 Setting up Home Connect.. 36 (Z-Nr.) ........ 48 15.3 Activating Wi-Fi on the ap- pliance ........ 36 22 Consumption values.... 49 15.4 Deactivating Wi-Fi on the appliance .......
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
Page 6
en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The heavy weight of the appliance may result in injury when lifted. ▶...
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
Page 8
en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite.
Page 10
en Safety An ingress of moisture can cause an electric shock. ▶ Before cleaning, pull out the mains plug or switch off the fuse in the fuse box. ▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance. WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous.
Preventing material damage en Foam and foam rubber may deform Preventing material damage 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may Preventing material damage ATTENTION! damage the surfaces of the appli- The functionality of the appliance ance.
en Installation and connection ¡ Do not exceed the programme's Remove any accessories from the maximum load capacity. Pro- drum. grammes → Page 25 Close the door. ¡ After drying, clean the lint screen. → "Cleaning the fluff filter", 4.2 Contents of package Page 31 After unpacking all parts, check for ¡...
Installation and connection en If residual water in the appliance Installation loca- Requirements freezes, this may cause damage to tion the appliance. In a washer-dryer Only use the ori- Do not install or operate this appli- ▶ stack ginal connection ance anywhere that is liable to ex- set from the perience frost or outdoors.
Page 14
en Installation and connection container. Use the water outlet hose Pull out the condensation hose to drain away excess condensation from the connecting piece. directly into the waste water system. Note ¡ Operate this appliance using the water outlet hose provided. → "Connecting the water outlet hose", Page 14 If you connect the water outlet...
Page 15
Installation and connection en Push the water outlet hose as far Water outlet connection types as it will go into the connecting ATTENTION! piece. In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶...
en Installation and connection bow and secure it using fixing ma- terial. Secure the elbow to the gully. 4.5 Aligning the appliance In order to reduce vibrations and noises, align the appliance correctly. To align the appliance, turn the ap- ▶ pliance feet. Check that the appli- ance is level using a spirit level.
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Changing a setting value Programmes → Page 25 If you activate certain settings, the Programme selector display shows selection buttons and → Page 29...
Display en Display 6 Display The display shows the current set- Display tings, options or relevant information. Depending on the programme status, the display shows some information in area, e.g. . Note: Additional functions may be available as a result of software updates. → "Installing the software update", Page 37 If a software update is available, you can find further information in the Home Connect app.
Page 20
en Display Indicator Description The cooling process cools the laundry independently of the programme status for a few minutes while the drum is rotating, in order to avoid damage to the laundry. The cooling process can be cancelled by opening the door. Note: Do not change the set programme.
Page 21
Buttons en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Buttons Note: Additional functions may be available as a result of software updates. → "Installing the software update", Page 37 If a software update is available, you can find further information in the Home Connect app.
en Buttons Button Selection Description Multiple selection → "Basic settings", Page 38 Favourite ¡ Saving Press the button for ap- prox. 3 seconds to save ¡ Setting your customised pro- gram settings. → "Saving the pro- gramme settings", Page 29 If you briefly press the button, you can set cus- tomised program set- tings for your program.
Page 23
Buttons en Button Selection Description Business ¡ Activate Adjust the set pro- gramme with crease-re- ¡ Deactivate moval function Iron As- sist . Observe the pro- gramme description. → "Programmes", Page 25 Suitable for dry suits or skirts that have not been worn for long or at all and that are labelled "Dry clean only".
Page 24
en Buttons Button Selection Description Low Heat ¡ Activate Activate or deactivate gentle drying. ¡ Deactivate The temperature is re- duced for delicate fab- rics, e.g. polyacrylic or elastane. The programme duration is extended. Finish in Up to 24 hours Set the programme end time.
Programmes en Note: Additional functions may be Programmes 8 Programmes available as a result of software up- dates. You can dry your fabrics using either Programmes → "Installing the software update", an automatic programme or a timed Page 37 programme. If a software update is available, you can find further information in the Home Connect app.
en Programmes Programme Description Max. load (kg) Sportswear Dry self-drying sportswear made of per- formance fibres, microfibres and synthet- ics. Shirts Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time.
Page 27
Programmes en Programme Description Max. load (kg) Timed Progr. Warm Dry all types of fabric except for wool and silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. Note: This programme is suitable for dry- ing using the wool basket. If you are using the wool basket, you can also dry fabrics made from wool using this programme.
en Accessories Accessories 9 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 47. Order number Connection kit To save space, stack the WTZ27510 appliance on a suitable washing machine of the same width and depth and that is from the...
Laundry en The switch-on process takes a few Laundry 10 Laundry seconds. Note: The lighting for the drum goes Laundry out automatically. 10.1 Preparing the laundry 11.2 Setting a programme ATTENTION! Objects remaining in the laundry may damage the laundry and the drum. Press the required programme. Remove all items from any pock- → "Programmes", Page 25 ▶...
en Basic operation 11.4 Opening the door 11.6 Starting the programme Take hold of the door's recessed Requirement: A programme is set. grip and pull on the door. → Page 29 Press ▶ a The display shows the programme duration or the programme end time. a After the programme has ended, the display shows: "End"...
Basic operation en Remove the two-part fluff filter. 11.10 Put the appliance into standby mode Press ▶ 11.11 Fluff filter During drying, fluff from the laundry is collected in the fluff filter. The fluff fil- ter protects the appliance from fluff. Cleaning the fluff filter If the drying programme has finished or the display shows a notification Remove the fluff from the recess.
en Basic operation Open the two fluff filters. Close the two fluff filters and put them together. Remove the fluff. Insert the two-part fluff filter. Clean the two fluff filters thoroughly under warm, running water and Close the door. then dry them off. 11.12 Condensation con- tainer Condensation that forms in the appli-...
Page 33
Dryness level en Emptying the condensation Inserting the condensation container container If the drying programme has finished Push the condensation container ▶ or the display shows a notification in as far as it will go. while the appliance is in operation, empty the condensation container.
en Childproof lock 12.1 Changing the dryness Childproof lock 13 Childproof lock level Secure your appliance against being Childproof lock For some automatic programmes, operated unintentionally using the you can change the dryness level so controls. that your laundry will be drier or more damp.
Crease-removal function en Do not use a programme with the 14.2 Filling the water tank crease-removal function for the Your appliance removes the creases following fabrics: from rarely worn clothing using cold ¡ Wool, leather and viscose mains water. If the display shows a ¡...
en Home Connect Insert the condensation container. The Home Connect app guides → Page 33 you through the entire login pro- cess. Start the programme. → Page 30 15.2 Setting up Home Con- Home Connect nect 15 Home Connect Requirements This appliance is network-capable. Home Connect ¡ The Home Connect app has been Connecting your appliance to a mo- installed on your mobile device.
Home Connect en Note: To exit the Home Connect set- Activating remote start tings, press and hold Remote Requirements Start for approx. 3 seconds. ¡ The appliance door is closed. ¡ The refresher tank is not empty. 15.5 Installing the software Press Remote Start . ▶...
en Basic settings Press Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. 15.9 Remote diagnostics Information on data protection can be Customer Service can use Remote retrieved in the Home Connect app. Diagnostics to access your appliance if you contact them, have your appli- ance connected to the Home Con- Basic settings...
Appliance care en Set the volume of the signal Appliance care 17 Appliance care tone emitted when the but- tons are pressed: The appliance offers cleaning pro- Appliance care 0 (off) to 4 (very loud) grammes for basic and intensive ap- Set the display brightness: pliance care.
en Appliance care Insert the condensation container 17.2 Calling up the appliance so that it locks into place. care programme Press Requirement: The appliance care a The appliance care programme programme is ready. → Page 39 starts and a signal tone sounds. a "End" appears on the display and Press a signal tone sounds once the ap- The switch-on process takes a few...
Cleaning and servicing en Insert the condensation container Starting the intensive appliance so that it locks into place. care programme Press Requirements a The appliance care programme ¡ The appliance care programme is continues. ready. → Page 39 a "End" appears on the display and ¡...
en Cleaning and servicing Remove the filter. ATTENTION! Hard or rough objects may damage the moisture sensor. Do not use hard or rough objects, ▶ abrasive cleaning products or steel wool for cleaning. Note: If you do not clean the appli- ance as described, the appliance's functionality may be impaired.
Troubleshooting en Troubleshooting 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶...
Page 44
en Troubleshooting Fault Cause and troubleshooting The water tank for the crease-removal function is empty. Fill the water tank. → Page 35 ▶ The display and but- Software fault. tons do not respond. To restart the appliance, press and hold for ap- proximately 5 seconds. If the fault occurs again, disconnect the appliance from the power supply for at least 30 seconds.
Page 45
Troubleshooting en Fault Cause and troubleshooting The drying time is too Regularly dry a load weighing more than 3 kg of ▶ long. damp laundry until the programme ends. The appliance's ventilation opening is blocked. Ensure that the ventilation opening of the appliance ▶...
Page 46
en Troubleshooting Fault Cause and troubleshooting Creasing. The selected programme is unsuitable for the type of fabric. Set a suitable programme. → Page 25 ▶ The load is unsuitable. Observe the programme's maximum load capacity. ▶ → Page 25 Prepare the laundry. → Page 29 ▶ The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
Transportation, storage and disposal en This appliance is la- Transportation, storage and disposal 20 Transportation, stor- belled in accordance age and disposal with European Directive 2012/19/EU concerning Transportation, storage and disposal used electrical and elec- 20.1 Disposing of old appli- tronic appliances (waste electrical and electronic ance equipment - WEEE).
Page 48
en Customer Service 21.1 Product number (E-Nr.), production number (FD) and consecutive num- bering (Z-Nr.) You can find the product number (E- Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance's rating plate. Depending on the model, the rating plate is located: ¡...
Page 49
Consumption values en Consumption values 22 Consumption values Cottons Eco programme The actual values may deviate from Consumption values (denoted by the arrow symbol) is the indicated values depending on suitable for drying cotton laundry with the type of fabric, composition of a normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying...
Page 50
en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cottons + Iron Dry 12.0 1400 1:40 0.48 Cottons + Iron Dry 12.0 1000 3:08...
Page 51
Declaration of Conformity en essential requirements and other rel- A detailed Declaration of Conformity evant provisions of Directive can be found online at www.bosch- 2014/53/EU. home.co.uk among the additional A detailed RED Declaration of Con- documents on the product page for formity can be found online at your appliance.
Page 52
en Declaration of Conformity The manufacturer, BSH Hausgeräte GmbH deems that it has complied with ¡ provision 5.1-1 of ETSI EN 303 645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1; ¡ provision 5.2-1 of ETSI EN 303 645 v2.1.1;...
Page 56
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.