Advertisement
Quick Links
Advertisement
Related Manuals for Asus X571 Series
Summary of Contents for Asus X571 Series
- Page 1 Disassembly Procedure ASUS X571 Series Repair Manual 2 - 1 V1.0...
- Page 2 Disassembly Procedure 2 - 2 V1.0...
- Page 3 Disassembly Procedure • ASUS is not responsible for direct, indirect, intentional o unintentional damages resulting from improper installation and operation. • Carefully read through this Service Guide for a look at various components of the device before performing any service and repairs.
- Page 4 Disassembly Procedure • Turn off your device. • Disconnect all connected peripherals and cables. • Disconnect all power cables and remove the battery pack (if applicable). IMPORTANT! • If you are uncertain about performing the described service procedures, stop and contact an authorized service center for assistance. •...
- Page 5 Disassembly Procedure Service Overview Please pay special attention to the cautions below to prevent any damages to the notebook and also please be sure to select the appropriate tools described in this section to perform any services desired. Precautions Before you perform any service and or repair on the notebook, please follow the steps below first. 1.
- Page 6 Disassembly Procedure Cross Screwdriver Please according to different screw specification choose different screwdriver and head. Below photos are for reference only. Use a cross screwdriver to fasten/remove screws. Plastic Blade Tweezers Use a pair of tweezers to remove/insert flexible cables. 2 - 6 V1.0...
- Page 7 Disassembly Procedure Thickness gauge Thickness compass specification 0.05mm-1.5mm Use it to measure the gap. Block Diagram 2 - 7 V1.0...
- Page 8 Disassembly Procedure Bottom Case Module The illustrations below show how to remove the Bottom Case Module. Remove Bottom Case Module Remove 6 screws on Bottom Case. (There’re 2 screws under the rubber foots.) SCREW M2.5*5.0-I(BZN)(NYLON PATCH) IRON Parts ⚫ Total screw *6 2 - 8 V1.0...
- Page 9 Disassembly Procedure Separate from the Top Case Module Use plastic blade to pry the Bottom case. Snaps as below Parts X571 BOTTOM CASE ASSY * 1 (Actual part name depends on different SKU.) 2 - 9 V1.0...
- Page 10 Disassembly Procedure Battery Module The illustration below shows how to remove the battery module. Notice: Before disassembly, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to avoid IC damage. 1. Remove 3 screws on the Battery module. CREW M2.0*5.5-I(BZN,NYLOK,D4.5,T0.8)STL Parts ⚫...
- Page 11 Disassembly Procedure Speaker Module The illustrations below show how to remove the Speaker Module. 1. Disconnect the speak cable on the M/B and remove it. Assembly Notice: please well arrange the audio cables and put them in the hook slot. Parts ⚫...
- Page 12 Disassembly Procedure Fan Module The illustration below shows how to remove the module. 1. Disconnect the Fan cable on the M/B. 2. Remove 4 screws and take Fan away. SCREW M2.5*3.5-I(BZN)(NYLOK)//QCI/MS25035I070(IRON) 2 - 12 V1.0...
- Page 13 Disassembly Procedure ⚫ Please use the correct technique of taking fans in order to avoid being out of shape. Correct demonstration Wrong demonstration Parts ⚫ X571 FAN//QCI/DQ5D517G000(104.4*75.6*6.5) & DQ5D587G000(83.7*73.6*6.5) ⚫ Total screw * 4 Thermal Module Thermal The illustration below shows how to remove the module.
- Page 14 Disassembly Procedure SCREW M2.0*2.5-I(BZN)(NYLOK)(D4.0)STEEL Please refer to Repair Notice RN201907120_1 SOP for thermal material rework when you re-assemble thermal module. Location:[GPU/CPU] Thermal material: GA500 Grease thickness = 0.2 ~ 0.3mm Thermal Pads The thermal pads can reuse if they are not damaged. They come with the Thermal Module.
- Page 15 Disassembly Procedure HDD & SSD Module HDD and SSD The illustration below shows how to remove the module. 1. Disconnect the cable on the M/B. Remove 1 screw on the SSD module. Assembly notice: Insert FFC to the bottom until just accord with the line when lock the latch. SCREW2.5*3I(HEAD4.5*0.5)(BNI)(NYLOK)IRON 2.
- Page 16 Disassembly Procedure 3. Remove the Bracket Snap , Push the HDD module to right and take it out 2 - 16 V1.0...
- Page 17 Disassembly Procedure Notice: If users get this model with SSD only, they can add a new HDD by themselves, but they need below two parts to assemble the HDD. 1.HDD SUPPORT ASSY (X571 only) 2.HDD FFC Parts ⚫ Total screw *1 ⚫...
- Page 18 Disassembly Procedure Wireless Module The illustration below shows how to remove the Wireless module. 1. Disconnect the cable on the wireless module and remove 1 screw. SCREW2.5*3I(HEAD4.5*0.5)(BNI)(NYLOK)IRON 2. Remove the WLAN Board from left. Parts ⚫ Total screw *1 ⚫ INTEL/9461.NGWG.NV 958855 JFP1 * 1 BACK 2 - 18...
- Page 19 Disassembly Procedure USB Board The illustrations below show how to remove the USB Board. 1. Disconnect the FFC from Main Board and remove 1 screw. Assembly notice: Insert FFC to the bottom until just accord with the line when lock the latch. USB BD SCREW M2.5*3.5-I(BZN)(NYLOK)//QCI/MS25035I070(IRON) Parts...
- Page 20 Disassembly Procedure Motherboard The illustrations below show how to separate the Motherboard. 1. Disconnect the Keyboard FPC EDP cable. Assembly notice: Insert FFC to the bottom until just accord with the line when lock the latch. 2. Disconnect the Touchpad FFC Backlight FFC.
- Page 21 Disassembly Procedure 3. Remove 2 screws on the MB Board and 2 screws on hinge. SCREW M2.5*5.0-I(BZN)(NYLON PATCH) IRON M2.5*3.5-I(BZN)(NYLOK)//QCI/MS25035I070(IRON) 4. Disconnect the FP FPC. Assembly notice: Insert FFC to the bottom until just accord with the line when lock the latch. 2 - 21 V1.0...
- Page 22 Disassembly Procedure MB BD GPU bracket CPU bracket HDMI gasket， 2 - 22 V1.0...
- Page 23 Disassembly Procedure Assembly notice: Please change new one, If FFC is damage during disassembly. Here are some samples of FFC damage: Parts ⚫ Total screw *4 ⚫ X571 MB BD *1 BACK 2 - 23 V1.0...
- Page 24 Disassembly Procedure Touchpad Module The illustrations below show how to remove the Touchpad module. 1. Tear up the Mylar and remove 3 screws on Touchpad module. Notice: Please stick new Mylars when the Touchpad is assembled. SCREW M2.0*2.0- I(BNI)(NYLOK)IRON ⚫ Total screw *3 ⚫...
- Page 25 Disassembly Procedure Bezel Module The illustrations below show how to remove the Bezel module. 1. Remove the last 2 screws on Hinge Appropriately protect the LCD and use a plastic blade to pry the Bezel. Start from the right and left inner side of the bezel.
- Page 26 Disassembly Procedure LCD Module The illustrations below show how to remove the LCD module. 1. Remove the left hinge cap. 2. Remover the LCD module from the adhesive tape at both side of the cover. 2 - 26 V1.0...
- Page 27 Disassembly Procedure Check the adhesive whether exist on the LCD cover when assemble the bottom Assembly Notice: case. If not, please paste it from the bottom of LCD cover. Notice : Please slowly pull the adhesive up about 30 degree. 30゜...
- Page 28 Disassembly Procedure SCREW2.5*3I(HEAD4.5*0.5)(BNI)(NYLOK)IRON SCREW M2.0*2.5-I(BZN)(NYLOK)(D4.0)STEEL ⚫ Total screw *8 ⚫ X571 HINGE R//QCI/FBXKT002010 (main) ⚫ X571 HINGE R//QCI/FBXKT002010 (second) BACK ⚫ X571GT HINGE L//QCI/FBXKT004010 (main) ⚫ X571GT HINGE L//QCI/FBXKT004010 (second) Notice: If you need to replace hinges, please make sure hinge R and hinge L are the same vendor. WLAN Antenna Cable Antenna Cable The illustrations below show how to remove the...
- Page 29 Disassembly Procedure 2. Disconnect WLAN cable from the cover 2 - 29 V1.0...