Table of Contents
Advertisement
Precautions for use
Intended use of the product
The purpose of the projector is to project an image signal from imaging equipment or a computer on a screen or
other surface as a still image or moving image.
Installation and handling of the laser product (for USA and Canada)
rFor permanent Installation
f Installation of the projector shall be performed by a technician trained by Panasonic Connect Co., Ltd.
f The variance application to the U.S. Food and Drug Administration (FDA variance application) will be performed
by Panasonic Connect Co., Ltd. The person responsible of the device or usage shall store the original or a copy
of the FDA variance approval letter received from Panasonic Connect Co., Ltd.
rFor temporary installation
f Installation of the projector shall be performed by a technician trained by Panasonic Connect Co., Ltd.
f Owner of the projector or the person responsible of usage such as the promotor of the show shall apply for FDA
variance and acquire the approval letter.
f The variance holder who has acquired the FDA variance approval letter must submit the "installation checklist"
required by FDA to Panasonic Connect Co., Ltd.
f Variance holder shall create and store a document recording the information such as the location of the use,
dates of the use, users of the projector.
rFor use
f This projector is categorized as the risk group 3 of IEC 62471-5:2015.
f Do not enter within the hazard distance (within RG3 range), refer to "Hazard distance (IEC 62471-5:2015)".
f Assign a person responsible of the device when using the projector. The person responsible shall be trained by
Panasonic Connect Co., Ltd. before starting to use the projector.
Note
f Information such as training, FDA variance application, installation checklist, usage recording document can be confirmed by
accessing following URL.
https://eww.pavc.panasonic.co.jp/projector/extranet/index.html
Cautions when transporting
f Transport the projector with two or more people. Failure to do so may drop the projector, which may result in
damage or deformation of the projector, or injury.
f Hold the bottom of the projector and do not hold the projection lens or the opening around the projection
lens when transporting. Failure to do so may cause damage. Also, handle the projector in a way not to apply
excessive vibration or shock. Failure to do so may cause a failure due to the damaged internal components.
f Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
Cautions when installing
rDo not set up the projector outdoors.
The projector is designed for indoor use only.
rDo not set up the projector in the following locations.
f Places where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal
components or malfunction.
f Location close to sea or where corrosive gas may occur: The projector may fall due to corrosion. Also, failure to
do so may shorten the life of the components and result in malfunctions.
f Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may fluctuate in rare
cases due to the heated air from the exhaust vent or the hot or cooled air from the air conditioner. Make sure
that the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward
the front of the projector.
22 - ENGLISH
Chapter 1 Preparation — Precautions for use
Advertisement
Table of Contents
