Table of Contents
Advertisement
Connecting an External Monitor
Stereo mini-plug audio cable (not supplied)
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer
analog image you're projecting.
NOTE:
• The AUDIO OUT jack does not support headphone terminal.
• When audio equipment is connected, the projector speaker is disabled.
• The signal output from the COMPUTER OUT of this projector is for projecting image on exclusive one display.
• When no signal is applied over 3 minutes in the condition of projector standby when NETWORK STANDBY is set in the Standby mode,
output from the COMPUTER OUT or AUDIO OUT terminal will be stopped. In this case pull out the computer cable and set it back after
inputting video signal
Monitor out and sleep mode:
• The COMPUTER OUT terminal will not work when [NORMAL] is selected for [STANDBY MODE].
The COMPUTER OUT terminal will work only in the sleep mode.
Applying a signal from the COMPUTER IN terminal will put the projector in the sleep mode, which allows you to use the COMPUTER OUT
terminal and the AUDIO OUT mini jack.
The sleep mode is one of the standby modes. The sleep mode cannot be selected from the menu.
• In the network standby mode, sound for the last viewed computer or video source will be heard.
BNC-to- COMPUTER IN terminal converted signal will not be output in the standby mode and sleep mode.
Computer cable (VGA) (supplied)
COMPUTER OUT
AUDIO OUT
95
6. Installation and Connections
Computer cable (VGA) (not supplied)
Advertisement
Table of Contents
Troubleshooting
