Table of Contents
Advertisement
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Steps
1. Align and insert the speaker into the slot on the system.
2. Press the speaker into the slot on the system until the release tab clicks.
3. Route the speaker cable through the routing guides between the speaker and the chassis.
4. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Solid-state drive assembly
Removing the solid-state drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following image indicates the location of the solid-state drive assembly and provides a visual representation of the removal
procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
15
Advertisement
Table of Contents
