Page 1
Operating instructions Dishwashers To avoid the risk of accidents or damage to the appliance, it is es- sential to read these instructions as well as the installation sheet be- fore it is installed and used for the first time. en-GB HG07-W M.-Nr.
Closing the door....................23 Miele@home ......................24 Basic settings ...................... 25 Setting the language ..................25 Setting up Miele@home ................. 25 Setting the water hardness level ..............26 Activating AutoDos..................26 Dishwasher salt ....................28 Filling the salt reservoir................... 29 Refilling the salt ....................
Page 4
Contents Refill reminders....................41 AutoOpen ......................42 Extra clean......................42 Extra dry ......................42 2nd interim rinse....................43 Hygiene cycle ...................... 43 Software version....................43 Showroom ......................43 Factory default..................... 43 Copyrights and licences for the communication module........44 Caring for the environment ................45 Economical dishwashing..................
Page 5
Contents Interrupting a programme..................68 Cancelling or changing a programme ..............68 Options ....................... 69 Timer ......................69 Activating Remote start..................71 Guide for selecting a programme ..............72 Programme overview ..................74 Further programmes ..................76 Programme options................... 77 Selecting programme options ................
Page 6
Contents Optional accessories ..................107 Installation......................109 The Miele Waterproof system................109 Water inlet ......................109 Regulation in Germany..................110 Water drainage ....................111 Electrical connection ..................113 Technical data....................114 EU Conformity declaration .................. 115 UK Conformity declaration .................. 115...
Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep the installation sheet and the operating instructions in a safe...
Page 8
Warning and safety instructions Appropriate use This dishwasher is intended for use in domestic households and similar working and residential environments. This dishwasher is not intended for outdoor use. This dishwasher is intended for use at altitudes of up to 4000 m above sea level.
Page 9
Warning and safety instructions Safety with children Children under 8 years of age must be kept away from the dish- washer unless they are constantly supervised. Children aged 8 and older may only use the dishwasher without supervision if they have been shown how to use it in a safe manner. Children must be able to understand and recognise the possible dangers caused by incorrect operation.
Page 10
It is most important that this basic safety re- quirement is present. If in doubt, the electrical installation should be checked by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate or lack of earthing system (e.g. electric shock). ...
Page 11
Warning and safety instructions There must be no electrical sockets behind the dishwasher be- cause the building-in niche may be too small. Danger of overheating and fire risk if the dishwasher were to be pushed up against a plug. ...
Page 12
Miele dealer or Miele Service. While the appliance is under warranty, repairs should only be un- dertaken by a Miele authorised service technician. Otherwise the warranty is invalidated.
Page 13
(available from the Miele Customer Service Department). For safety reasons this must only be done by the Miele Customer Service De- partment or a Miele authorised technician. Correct installation ...
Page 14
The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact the Miele Customer Service Department. The maximum weight of the front panel that can be aligned with the factory fitted door springs is 10–12 kg (depending on model).
Page 15
Please observe the information given in the “Technical data” chapter regarding the capacity of the dishwasher. Accessories and spare parts Only use original Miele accessories. If other parts are used, war- ranty, performance and, if applicable, product liability claims will be invalidated.
Page 16
Warning and safety instructions Miele will guarantee to supply functional spare parts for a min- imum of 10 years and up to 15 years following the discontinuation of your dishwasher. Transport Damage to the dishwasher can compromise your safety. Before using the dishwasher, check it for any visible transport damage.
Notes on the operating instructions Additional information and com- These operating instructions apply to ments several different dishwasher models of different heights. Additional information and comments The different dishwasher models will be are highlighted in a box framed with a named as follows: single black line.
Scope The appliance is supplied with: - Dishwasher - Operating instructions for operating the dishwasher - Installation sheet for installing the dishwasher - Other installation accessories for in- stalling the dishwasher (see installa- tion sheet) - Funnel for filling the dishwasher salt - Additional printed matter and add- ons if required...
Guide to the appliance Appliance overview a Door locking pins i Salt reservoir b Top spray arm j Data plate c 3D MultiFlex cutlery tray (depending k Rinse aid reservoir on model) l Detergent compartment d Upper basket (depending on model) m AutoDos detergent outlet e Middle spray arm n AutoDos (automatic dispensing)
Guide to the appliance Control field Auto Express Timer Auto 45 C 45 C ° ° 65 C 65 C ° ° 75 C 75 C ° ° a Optical in-operation indicator light g Express button For indicating an ongoing wash pro- For reducing the programme dura- gramme when the door is closed.
Guide to the appliance The OK button is used to confirm mes- Display functions sages or settings and also to move to The display is used to select or set the the next menu or another menu level. following: Under Further programmes/settings, - The programme a scroll bar ...
Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged...
Before using for the first time Every dishwasher is tested at the fact- Risk of scalding due to hot wa- ory. There will be residual water in the ter. appliance from this test. It is not an in- During operation, water in the dish- dication that the dishwasher has been washer may be very hot.
- A WiFi network Therefore, the availability of featured functions cannot be guaranteed. - The Miele app - A Miele user account The user ac- Miele@home availability count can be created via the Miele The ability to use the Miele app de- app.
Set up Miele@home will ap- Switching on the dishwasher pear in the display. Open the door. To set up Miele@home now, confirm Switch the dishwasher on with the by touching OK. button. Tip: To postpone setup until later, select The welcome screen will appear when the option ...
Before using for the first time Setting the water hardness level Activating AutoDos The display will change to the screen The display changes to the settings for setting the water hardness. screen for AutoDos (see “Detergent – Automatic dispensing/AutoDos”). - You should programme the dish- washer to the correct water hardness Even if you do not wish to use Auto- for your area.
Page 27
Before using for the first time Finally, prompts will appear in the dis- play. After confirming these prompts with OK, the messages Refill salt may appear. Refill rinse aid Add salt and rinse aid if necessary (see “Before using for the first time – Dishwasher salt”...
Before using for the first time Dishwasher salt If the water in your area is very soft and constantly lower than 0.9 mmol/l In order to achieve good cleaning res- (5 °dH – German scale), you do not ults, the dishwasher needs to operate need to add dishwasher salt.
Before using for the first time Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 2 l of water to enable the salt to dis- solve. Once the dishwasher has been used once, there is always sufficient water in the salt reservoir.
Before using for the first time Refilling the salt After the salt reservoir has been filled, the salt refill indicator may still appear in When Refill salt appears in the dis- the display if the salt concentration has play, wait until the end of the pro- not yet reached the correct level.
Before using for the first time Rinse aid If you only ever wish to use combina- tion products in your dishwasher, Rinse aid is necessary to ensure that you do not need to add rinse aid. water does not cling and leave marks However, for optimum rinsing and on crockery during the drying phase, drying results, use dishwasher deter-...
Before using for the first time Close the lid firmly until you hear it Adding rinse aid click into place. Otherwise, water can enter the rinse aid reservoir during a programme. Wipe up any spilled rinse aid. This prevents excess foam developing during the next programme.
Settings Changing settings You can alter the dishwasher’s con- trols to suit changing requirements by Use the buttons to select the adjusting the settings. menu option you want to change and confirm your selection with OK. The settings can be altered at any time.
Settings Language Water hardness The display can be set to appear in one Your dishwasher is fitted with a water of several different languages. softener. You can change the language used in - You should programme the dish- the display and also the country via the washer to the correct water hardness Language ...
Settings AutoDos (automatic dispens- Rinse aid ing) You can adjust the rinse aid dosage for best results. Automatic dispensing automatically ad- The rinse aid dosage can be set from 0 justs the amount of detergent to the se- to 6 ml. lected programme.
Settings Connect using App Miele@home The Miele app is available to download Your dishwasher is equipped with an in- free of charge from the Apple App tegrated WiFi module. ® Store or from the Google Play™ store. You can connect your dishwasher to your WiFi network.
Page 37
Deactivate As an alternative to networking via the If you do not wish to use the WiFi mod- Miele app you can connect your dish- ule of your dishwasher, you can switch washer to your WiFi network using WPS it off.
Page 38
Settings Displaying Connection status Reset You can call up the current connection This menu option only appears if you status of your dishwasher. have already connected your dish- washer to your WiFi network. Select the Connection status menu op- tion and confirm with OK.
If you do not install an update, you can Even if the option is Remote control continue to use your dishwasher as switched off, you can use Miele to call usual. However, Miele recommends in- up information about your appliance. stalling updates. However, you cannot start any pro-...
RemoteUpdate will be selected programme. This function provided in the Miele app. shows the estimated consumption be- A message will appear in your dish- fore a programme, and the actual con-...
You can set the display brightness to If you only ever use combination deter- one of seven different levels. gent products or automatic dispensing using Miele PowerDisks (if available), Buzzer you can switch off the refill reminders for dishwasher salt and rinse aid if you A buzzer sequence will sound at the wish.
Settings AutoOpen Extra clean In some programmes the door automat- You can choose this function to in- ically opens slightly to assist the drying crease the cleaning performance of the process. programmes. This function can be deactivated if you If you activate this function, the pro- wish.
WiFi module settings (where applicable) grammes (< 50 °C), there is a risk of have to be reset separately (see “Set- bacteria and unpleasant odours build- tings – Miele@home”). ing up in the wash cabinet (see “Clean- ing and care – Hygiene cycle”). Select Reset and confirm with OK.
These items of software/software components are pro- tected by copyright. The copyrights held by Miele and third parties must be respected. Furthermore, this communication mod- ule contains software components which are distributed under open source licence conditions.
Caring for the environment - You can connect the dishwasher to a Economical dishwashing hot water supply. A hot water con- This dishwasher is exceptionally eco- nection is particularly suitable with nomical in its use of water and electri- energy-saving water heating sources, city.
Caring for the environment 2. Display consumption EcoFeedback consumption in- dicator At the end of the programme you can call up the actual amount of energy and The Consumption function is used for water used by the programme that has calling up information about the energy just been run.
Loading the dishwasher - The spray arms must not be blocked General information by items that are too tall or hang Remove coarse food residues from through the baskets. Test for free crockery. movement by manually rotating the spray arms. There is no need to pre-rinse items un- der running water.
Page 48
Loading the dishwasher Items not suitable for dishwashers: Damage due to caustic alkaline - Wooden cutlery and crockery or detergents. items with wooden parts: these may Aluminium parts (e.g. the grease fil- discolour and fade. The glue used in ters of cooker hoods) can be dam- these items is not dishwasher-proof aged by caustic alkaline detergents.
Loading the dishwasher Loading the FlexCare cup rack Upper basket You can put cups, small bowls and flat See the “Loading the dishwasher” crockery on the FlexCare cup rack. chapter, “Loading examples” section Glasses can be arranged along the cup for examples of how to load crockery rack so they sit securely during the pro- and cutlery.
Page 50
Loading the dishwasher Adjusting the FlexCare cup rack You can set the height and depth of the cup rack at 2 different levels so that it can accommodate larger cups and so that taller crockery can be placed un- derneath it. ...
Loading the dishwasher To raise the upper basket: Adjusting the upper basket Lift the basket up until it clicks into In order to gain more space for taller place. pieces of crockery in the lower basket or upper basket, the upper basket can To lower the upper basket: be adjusted on 3 levels with 2 cm ...
Loading the dishwasher Loading the MultiComfort zone Lower basket The rear section of the lower basket is See the “Loading the dishwasher” used for washing cups, glasses, plates chapter, “Loading examples” section and pots and pans. for examples of how to load crockery and cutlery.
Page 53
Loading the dishwasher Lowering the spikes The rows of spikes at the front are used for loading plates, soup bowls, platters, dessert bowls and saucers. Both right-hand rows of spikes can be lowered to make more room for large items such as pots, pans and serving dishes.
Loading the dishwasher You can push the left insert to the Cutlery tray middle in order to accommodate tall See the “Loading the dishwasher” items of crockery and long stemmed chapter, “Loading examples” section glasses in the upper basket. for examples of how to load crockery You can put large and long cutlery in and cutlery.
Detergent There are different types of detergent: Active ingredients - Powder and liquid gel detergents. Damage caused by using unsuit- These detergents allow you to adjust able detergents. the amount dispensed according to Detergents that are not suitable for the size of the load and level of soil- domestic dishwashers can cause ing.
Detergent Detergent dosage Risk of chemical burns from de- tergent. There are two ways of dispensing the Dishwasher detergents can cause detergent. burning on the skin and in the eyes, During automatic dispensing the Auto- nose, mouth and throat. Dos will automatically dispense the re- Avoid contact with detergents.
Insert a PowerDisk (see “Automatic dispensing/AutoDos – Inserting a PowerDisks are available to order dir- PowerDisk”). ectly from Miele’s online store, the Miele Customer Service Department The AutoDos function will be activ- or from your Miele dealer. ated automatically.
Detergent Inserting a PowerDisk Switch on the dishwasher before you replace the PowerDisk so that the dishwasher recognises it. Only replace the PowerDisk when the message PowerDisk empty Deactivate appears. AutoDos with OK If the arrows in the PowerDisk holder and in the viewing window are not pointing towards each other, remove the PowerDisk holder (see “Cleaning...
Page 61
Detergent The detergent powder must be dry so that it does not clump together. Do not fill the AutoDos with any type of fluid. In order to ensure that the AutoDos works at its best, check it each time you replace the PowerDisk and clean it if needed (see “Cleaning and care –...
Detergent Adding detergent Manual detergent dispensing Detergent must be manually dispensed if you have deactivated automatic dis- pensing using the AutoDos button. Detergent dispensing The detergent compartment holds a maximum of 50 ml. There are marks in the detergent com- partment to aid with dispensing: 20, 30, max.
Page 63
Detergent The detergent must not cause the detergent compartment lid to get stuck. This can prevent the lid from opening during the programme se- quence. Do not overfill the detergent com- partment. If you wish, deactivate automatic dis- pensing/AutoDos. ...
Operation Switching on the dishwasher Selecting a programme Open the stopcock, if it is closed. Choose your programme according to the type of crockery and the degree of Open the door. soiling. Make sure the spray arms can rotate The different programmes and their freely.
Operation Display of programme duration Starting the programme Start the programme by closing the The estimated duration of the selected programme appears on the display be- door. fore the programme begins. If the door If necessary, confirm the previously is opened during the programme, the displayed message with OK.
Operation End of programme Energy management At the end of a programme, the optical To save energy, the dishwasher will in-operation indicator light will flash switch off automatically 10 minutes slowly with the door shut. The buzzer after the last time a button is pressed or might also sound.
Operation Switching off the dishwasher Unloading the dishwasher Open the door. Dishes tend to break and chip more easily when they are hot. Allow the The dishwasher can be switched off dishes to cool until they are comfortable at any time using the button.
Operation Interrupting a programme Cancelling or changing a pro- gramme A programme will be interrupted as soon as the door is opened. If a programme is cancelled, import- If the door is closed again, the pro- ant programme stages may be gramme will continue from the point it missed.
Options Activating the timer Timer Open the door. You can set the start time of a pro- gramme. The programme start time can Switch the dishwasher on with the be delayed for between 30 minutes and button. 24 hours. Select the programme you want to With start time delays between use.
Page 70
Options Starting a programme before the After you have activated the timer, all time for the timer has elapsed: the displays will switch off after a few minutes to save energy. A programme can be started before the time for the timer has elapsed. Press the ...
You can start your dishwasher remotely der Further programmes/Settings. using the Miele app. To do this, you first The option will also remain active if you need to install the app on your mobile...
Guide for selecting a programme Crockery Food deposits Programme features Lightly dried-on Temperature-sensitive dishes, normal food Programme with glass care glasses and plastics deposits All normal Variable, food deposits sensor-controlled programme Lightly dried-on Short programme taking Mixed crockery normal food less than an hour deposits Standard dried-on normal...
Page 73
Guide for selecting a programme Programme Consumption estimate Energy consumption Water consumption Gentle 45 °C Programme duration Energy consumption Auto 45–65 °C Water consumption Programme duration Energy consumption Water consumption QuickPowerWash 65 °C Programme duration Energy consumption Water consumption Programme duration Energy consumption Water consumption Intensive 75 °C ...
Programme overview Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying/ AutoOpen °C °C / Auto 45–65 °C Variable programme sequence, sensor-controlled adjustment according to load size and level of soiling / 45–65 55–70 required ...
Page 75
Programme overview Consumption Electrical energy Water Time Cold water Hot water Litres Cold water Hot water 15 °C 60 °C 15 °C 60 °C h:min h:min 3:19 3:05 0.64/0.63 0.40/0.39 2:02–3:07 1:54–2:51 0.75–1.05 0.55–0.75 6.0–13.0 1.30 0.85 13.5 3:10 2:48 1.10 0.75 10.5 0:58 0:58 0.85 0.45...
Programme overview Further programmes Maintenance programme The dishwasher wash cabinet is gener- PowerWash 60 °C ally self-cleaning. However, if residues Programme for cleaning a mixed load or deposits occur, use the Mainten- with normal household food residues. programme to clean it. The dish- ance washer must not be loaded for this pro- ExtraQuiet 55 °C...
Programme options Express Selecting programme options The Express programme option re- You can use programme options to ad- duces the programme duration. just the programmes. In order to achieve optimum cleaning To do this, you can select or deselect results, the temperature, and therefore the programme options before running the energy consumption, will increase the programme.
– Appliance care”). Follow the instructions on the product packaging. Miele cleaning and care products are available to order from the Miele Cus- tomer Service Department or from the Miele online shop. Clean the filters in the wash cabinet...
Cleaning and care Hygiene cycle Cleaning the door and the door seal If you mainly use low temperature pro- grammes, there is a risk of bacteria and The door seal and the sides of the dish- unpleasant odours building up in the washer door cannot be reached and wash cabinet.
Cleaning and care To avoid damaging the external sur- Cleaning the appliance front faces, do not use the following: Damage due to soiling. - Detergents containing soda, ammo- Soiling that is left too long might be- nia, acids or chlorides come impossible to remove and - Detergents containing descaling could cause the external surfaces to...
Cleaning and care Turn the AutoDos lid to and open Cleaning the AutoDos If the message is dis- Clean AutoDos Remove the PowerDisk if appropriate. played, check that the fill channel is clean, and clean it if necessary, e.g. powder residues.
Page 82
Cleaning and care Clean the fill channel using water and The AutoDos lid must close tightly so a soft brush if necessary. that the detergent powder does not get wet and clump together. It is very important that no moisture Make sure that all seals are clean.
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray, you first have to remove the cut- spray arm nozzles and bearings. The lery tray (if present).
Page 84
Cleaning and care Removing the top spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upwards to engage the inner ratchet. Then un- Rotate the screw thread of the lower screw the spray arm by rotating the spray arm anti-clockwise ...
Page 85
Cleaning and care Rotate the screw thread of the lower Inserting the upper spray arm spray arm clockwise until the arrow in Refit the upper spray arm and tighten the viewing window points to the lock it by hand. symbol .
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soiling “Cleaning and care” chapter, “Clean- from the suds solution.
Page 87
Cleaning and care In order to clean the inside of the fil- Rotate the screw connection clock- ter, pull the microfilter on the plastic wise until the arrow in the viewing ring downwards and away from the window points to the lock symbol . filter combination.
Cleaning and care Cleaning the water inlet filter A filter is incorporated in the screw thread to protect the water inlet valve. If the filter is soiled, insufficient water flows into the wash cabinet. Risk of electric shock from mains voltage.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a programme, the water has not been pumped away. The drain pump may be blocked by foreign ob- jects. These are easy to remove. ...
Page 90
Cleaning and care Damage due to incorrect clean- ing. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is under- neath the cover. Risk of injury from glass splin- ters.
Reset the trip switch in the fuse box or replace the fuse in the plug (see data plate for minimum fuse rating). If the mains fuse trips again, contact the Miele Customer Service Department. The dishwasher is not switched on.
If the fault message appears again, there is a tech- nical fault. Switch the dishwasher off. Close the stopcock. Call the Miele Customer Service Department. Waterproof The Waterproof system has reacted. Switch the dishwasher off.
– Opening the door”) and switch the dishwasher back on again. If the same fault message appears again, call the Miele Customer Service Department. The door locking pins do not retract after the door is opened. There may be a technical fault.
(see “Installation – Water drainage”). A technical fault has occurred. Fault F18 Switch the dishwasher off. Close the stopcock. Call the Miele Customer Service Department.
Problem solving guide Water drainage fault Problem Cause and remedy The optical in-operation Before rectifying the problem: indicator light is flash- Switch the dishwasher off. ing quickly. Water drainage fault. The alarm tone is There might be water in the wash cabinet. sounding.
“Inserting a PowerDisk” section). gramme that has If the same fault message appears again, call the already started stops. Miele Customer Service Department. The message AutoDos lid open appears in the dis- play The AutoDos function is active and the PowerDisk...
Page 97
AutoDos button and manually dispensing the de- tergent via the detergent compartment. If you wish to use automatic dispensing again, contact the Miele Customer Service Department. The optical in-operation An empty PowerDisk has been inserted or the Auto- indicator light is flash- Dos is blocked by residual detergent.
Page 98
Problem solving guide Problem Cause and remedy During the programme The lower spray arm is blocked or the jets of the lower spray arm are clogged. The AutoDos func- and at the end of the programme, the display tion is automatically deactivated during the pro- shows the following gramme because the AutoDos detergent outlet can- message:...
Problem solving guide General problems with the dishwasher Problem Cause and remedy The indicator lights and The dishwasher has switched off automatically to the display are dark. save energy. Switch the dishwasher on again with the button. Detergent residue is left The detergent compartment was still damp when de- in the detergent com- tergent was added.
Problem solving guide Noises Problem Cause and remedy Knocking noise in the A spray arm is knocking against a wash item. wash cabinet Carefully open the door and rearrange the wash items that are obstructing the spray arm. Rattling noise in the Wash items are insecure in the wash cabinet.
Problem solving guide Unsatisfactory washing result Problem Cause and remedy The crockery is not The crockery was not loaded correctly. clean. See notes under “Loading the dishwasher” for ex- amples on how to load crockery and cutlery. The programme was not powerful enough. ...
Page 102
Problem solving guide Problem Cause and remedy The crockery is not dry The rinse aid dosage is too low or the rinse aid con- or cutlery and glasses tainer is empty. are flecked. Replenish the rinse aid container, increase the dosage or change the brand of rinse aid (see “Be- fore using for the first time –...
Page 103
Problem solving guide Problem Cause and remedy White residue is visible The rinse aid dosage is set too low. on the crockery. Cloud- Increase the dispensing quantity (see “Settings – ing has occurred on Rinse aid”). glassware and cutlery. There is no salt in the salt reservoir.
Page 104
Problem solving guide Problem Cause and remedy There are rust stains on The affected items are not corrosion-resistant. cutlery. No remedy. Purchase cutlery that is dishwasher-safe. A programme was not run after dishwasher salt was added. Traces of salt have got into the normal wash cycle.
In the event of any faults which you From 1 March 2021, information on en- cannot remedy yourself, please contact ergy labelling and ecodesign require- your Miele dealer or the Miele Customer ments will be available in the European Service Department. Product Database (EPREL). You can...
Please order the latest version of this leaflet by email from: - testinfo@miele.de Please indicate your postal address, as well as the model and serial number of the dishwasher (see data plate). You can also download the brochure from the Miele website.
Optional accessories Dishwasher detergent, rinse aid and In hard water areas, we recommend us- cleaning and care products are avail- ing the complete Miele system: the able for this dishwasher, as are optional PowerDisk, rinse aid and salt perfectly accessories.
Page 108
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your Miele dishwasher. Dishwasher cleaner - For use with the Maintenance pro- gramme without detergent dispens- - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and asso-...
The Miele Waterproof system cold or hot water (up to max. 60 °C) Provided that your dishwasher has supplies. been installed correctly, the Miele Wa- If energy-saving water heating sources terproof system will protect you from such as solar energy circulation sys- water damage throughout its lifetime.
*INSTALLATION* Installation Risk of damage from leaking wa- Risk of damage due to excessive ter. pressure. The connection point is subject to A brief increase in the water pressure mains water pressure. Water leaking can damage components of the from it can cause damage.
*INSTALLATION* Installation Water drainage Lay the drain hose so that it does not kink and is not being subjected to The dishwasher’s drainage system is fit- pressure or tension. ted with a non-return valve, which pre- vents dirty water from flowing back into ...
Page 112
*INSTALLATION* Installation Venting the water drain If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be ven- ted. Otherwise, a siphoning effect dur- ing a programme can cause the appli- ance to empty itself of water.
The electrical installation must comply Miele product must also be maintained with VDE 0100 requirements. in isolated operation or in operation that is not synchronised with the mains...
Technical data Technical data Dishwasher model Normal Height 80.5 cm 84.5 cm (adjustable by (adjustable by +6.5 cm) +6.5 cm) Height of building-in niche Min. 80.5 cm (+6.5 cm) Min. 84.5 cm (+6.5 cm) Width 59.8 cm 59.8 cm Width of building-in niche 60 cm 60 cm Depth 57 cm 57 cm Weight Max. 47 kg Max.
UK Conformity declaration Miele hereby declares that this dishwasher complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk...
Page 119
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Ireland South Africa Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele (Pty) Ltd. ACN 005 635 398 2024 Bianconi Avenue...
Page 120
G 7160, G 7165 en-GB M.-Nr. 11 870 371 / 03...