hit counter script
Toro Recycler 21767 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. Recycler 21767
  6. Operator's manual
Toro Recycler 21767 Operator's Manual

Toro Recycler 21767 Operator's Manual

Hide thumbs Also See for Recycler 21767:
Table of Contents

Advertisement

Quick Links

Download this manual
55cm Recycler
Model No. 21767—Serial No. 400000000 and Up

Introduction

This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns on
residential properties. Using this product for purposes
other than its intended use could prove dangerous to
you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
Register at www.Toro.com.
®
Lawn Mower
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940 or J2723. As
configured to meet safety, emission, and operating
requirements, the actual engine torque on this class
of mower will be significantly lower. Please refer to
the engine manufacturer's information included with
the machine.
Do not tamper with or disable safety devices on the
machine, and check their proper operation regularly.
Do not attempt to adjust or tamper with the engine
speed control; doing so may create an unsafe
operating condition, resulting in personal injury.
g282707
Form No. 3428-884 Rev A
Operator's Manual
Figure 2
Safety-alert symbol
Original Instructions (EN)
All Rights Reserved *3428-884* A
Printed in Mexico
g000502

Advertisement

Table of Contents
loading

Related Manuals for Toro Recycler 21767

Summary of Contents for Toro Recycler 21767

  • Page 1: Introduction

    Society of additional information, contact an Authorized Service Automotive Engineers (SAE) J1940 or J2723. As Dealer or Toro Customer Service and have the model configured to meet safety, emission, and operating and serial numbers of your product ready.

  • Page 2: Table Of Contents

    Contents Safety Introduction ............... 1 This machine has been designed in accordance with Safety ............... 2 EN ISO 5395. General Safety ........... 2 Safety and Instructional Decals ......3 General Safety Setup ................ 5 1 Assembling and Unfolding the Handle....5 This product is capable of amputating hands and 2 Installing the Recoil-Starter Rope in the feet and of throwing objects.

  • Page 3: Safety And Instructional Decals

    Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decaloemmarkt Manufacturer's Mark 1. This mark indicates that the blade is identified as a part from the original machine manufacturer.
  • Page 4 decal138-3278 138-3278 1. Push the handle down to 2. Pull the handle up to move move forward. backward. decal137-9196 137-9196 1. Lock 2. Unlock...

  • Page 5: Setup

    Setup Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine. Assembling and Unfolding the Handle No Parts Required Procedure Note: Ensure that the cables are routed on the outside of the handle and are not pinched (D of Figure g236451 Figure 3...

  • Page 6: Installing The Recoil-Starter Rope In The Rope Guide

    Installing the Recoil-Starter Rope in the Rope Guide No Parts Required Procedure Important: To start the engine safely and easily whenever you use the machine, install the recoil-starter rope in the rope guide. g230719 Figure 4...

  • Page 7: Filling The Engine With Oil

    Filling the Engine with Oil No Parts Required Procedure Important: Your machine does not come with oil in the engine, but it does come with a bottle of oil. Before starting the engine, fill the engine with oil. g222533 Figure 5 Assembling the Grass Bag No Parts Required Procedure...

  • Page 8: Product Overview

    Contact your Authorized Service Dealer or authorized Toro distributor or go to www.Toro.com for a list of all approved attachments and accessories. To ensure optimum performance and continued safety certification of the machine, use only genuine Toro replacement parts and accessories.

  • Page 9: Operation

    Operation – Avoid prolonged breathing of vapors. – Keep your hands and face away from the nozzle and the fuel-tank opening. Note: Determine the left and right sides of the machine from the normal operating position. – Keep fuel away from your eyes and skin. Before Operation Filling the Fuel Tank •...

  • Page 10: Checking The Engine-Oil Level

    Checking the Engine-Oil Level Service Interval: Before each use or daily Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine. g231765 Figure 10 Adjusting the Handle Height You can raise or lower the handle in 1 of 2 positions that is more comfortable for you (Figure 11).

  • Page 11: Adjusting The Cutting Height

    Adjusting the Cutting Height CAUTION If the engine has been running, the muffler will be hot and can severely burn you. Keep away from the hot muffler. Adjust the cutting height as desired. Set all wheels to the same cutting height (Figure 12).

  • Page 12: Starting The Engine

    Figure 14 • Check the grass catcher components and the discharge chute frequently for any wear or deterioration and replace them with genuine Toro parts when necessary. Note: If the machine does not freely roll forward or backward after using the self-propel drive, stop...

  • Page 13: Recycling The Clippings

    Recycling the Clippings move the lever to the recycling position; refer to Operating the Bag-on-Demand Lever (page 14). If the side-discharge chute is on the machine, remove Your machine comes from the factory ready to recycle it; refer to Removing the Side-Discharge Chute (page the grass and leaf clippings back into the lawn.

  • Page 14: Operating The Bag-On-Demand Lever

    Operating the Side-Discharging the Bag-on-Demand Lever Clippings Use side-discharging for cutting very tall grass. The bag-on-demand feature allows you to either collect or recycle grass and leaf clippings while the If the grass bag is on the machine and the grass bag is attached to the machine.

  • Page 15: After Operation

    After Operation • For best performance, install a new blade before the cutting season begins. • Replace the blade when necessary with a Toro After Operation Safety replacement blade. Cutting Grass General Safety • Cut only about a third of the grass blade at a time.

  • Page 16: Cleaning Under The Machine

    Cleaning under the Machine Folding the Handle Service Interval: Before each use or daily WARNING For best results, clean the machine soon after you Folding or unfolding the handle improperly have completed mowing. can damage the cables, causing an unsafe Move the machine onto a flat paved surface.
  • Page 17 Insert the carriage bolt (with the bolt head toward the inside) through the handle bracket and the upper hole in the handle end. Ensure that the square edges of each carriage bolt fits into the upper or lower square hole in its related handle bracket (Figure 22).

  • Page 18: Maintenance

    • To ensure optimum performance of the machine, Figure 23 use only genuine Toro replacement parts and 1. Spark-plug wire accessories. Replacement parts and accessories made by other manufacturers could be dangerous, and such use could void the product warranty.

  • Page 19: Servicing The Air Filter

    Servicing the Air Filter Changing the Engine Oil Service Interval: Every 25 hours Service Interval: Yearly Yearly Changing the engine oil is not required, but if you want to change the oil, use the following Unclip the top of the air-filter cover (Figure 24).

  • Page 20: Replacing The Blade

    Replacing the Blade Service Interval: Yearly Important: You will need a torque wrench to install the blade properly. If you do not have a torque wrench or are uncomfortable performing this procedure, contact an Authorized Service Dealer. Examine the blade whenever you run out of fuel. If the blade is damaged or cracked, replace it immediately.

  • Page 21: Adjusting The Self-Propel Drive

    Adjusting the Self-Propel Drive For Self-Propel-Drive Models Only Whenever you install a new self-propel cable or if the self-propel drive is out of adjustment, adjust the self-propel drive. Turn the adjustment nut counterclockwise to loosen the cable adjustments (Figure 29). g231390 Figure 28 g273506...

  • Page 22: Storage

    Preparing the Machine for Storage On the last refueling of the year, add fuel stabilizer (such as Toro Premium Fuel Treatment) to the fuel as directed on the label. Dispose of any unused fuel properly. Recycle it according to local codes or use it in your automobile.
  • Page 23 The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer. Toro uses this information to fulfil contractual obligations - such as to register your warranty, process your warranty claim or to contact you in the event of a product recall - and for legitimate business purposes - such as to gauge customer satisfaction, improve our products or provide you with product information which may be of interest.

Table of Contents