Advertisement
Anti-Surge Thick Film Chip Resistors
ERJ P, PA,PM type
ERJ PA2, PA3, P03, P06, P08, PM8, P14
Features
● ESD surge characteristics superior to standard metal film resistors
: Metal glaze thick film resistive element and three layers of electrodes
● High reliability
● Suitable for both reflow and flow soldering
● High power
0.20 W : 0603 inch / 1608 mm size (ERJP03)
0.20 W : 0402 inch / 1005 mm size (ERJPA2)
0.33 W : 0603 inch / 1608 mm size (ERJPA3)
0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14)
0.66 W : 1206 inch / 3216 mm size (ERJP08)
● High precision, High voltage, High resistance value (ERJPM8)
: Limiting element voltage 500 V, Resistance tolerance ±1 %, TCR ±100 (x 10
● Reference standard
● AEC-Q200 compliant
● RoHS compliant
■ As for packaging methods, land pattern, soldering conditions and safety precautions,
please see data files.
Explanation of part numbers
Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below.
1
2
3
E
R
J
Product code
Code
inch size
PA2
Thick film
chip resistors
PA3
P03
P06
P08
PM8
P14
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
: IEC 60115-8，JIS C 5201-8，JEITA RC-2134C
4
5
6
P
0
6
Resistance tolerance
0402
Code
Tolerance
D
±0.5 ％
0603
F
±1 ％
0805
J
±5 ％
1206
1210
series
7
8
9
D
1
0
Nominal resistance value
Three digit type (±5 %),
Four digit type (±1 %, ±0.5 %)
Example:
222 : 2.2 KΩ
10R0 : 10 Ω
1002 : 10 KΩ
-6
/ K)
10
11
12
0
V
2
Packaging methods
Code
Packaging
Punched carrier Ttaping
X
2 mm pitch, 10,000 pcs
Punched carrier taping
V
4 mm pitch, 5,000 pcs
Embossed carrier taping
U
4 mm pitch, 5,000 pcs
Part No.
ERJPA2
ERJPA3
ERJP03
ERJP06
ERJP08
ERJPM8
ERJP14
29-Sep-23
Advertisement
Table of Contents
Related Manuals for Panasonic ERJ PA2 Series
Summary of Contents for Panasonic ERJ PA2 Series
- Page 1 Anti-Surge Thick Film Chip Resistors ERJ P, PA,PM type ERJ PA2, PA3, P03, P06, P08, PM8, P14 series Features ● ESD surge characteristics superior to standard metal film resistors : Metal glaze thick film resistive element and three layers of electrodes ●...
- Page 2 Anti-Surge Thick Film Chip Resistors Ratings Rated Limiting Maximum Rated Power terminal Resistance Resistance AEC- Category ambient element overload T.C.R. Part No. part temperature tolerance range Q200 rating temperature (inch size) (×10 /Ｋ) voltage voltage temperature (℃) (Ω) range Grade (℃) (℃) 10 to 1M...
- Page 3 Anti-Surge Thick Film Chip Resistors Ratings Power derating curve ・For resistors operated in ambient rated ambient temperature, power rating shall be derated in accordance with the figure below. In addition, please use under the condition that the product temperature is below the upper category temperature.
-
Page 4: Dimensions (Not To Scale)
Anti-Surge Thick Film Chip Resistors Dimensions (not to scale) Unit : mm Mass (Weight) Dimensions Part No. (Reference) (g/1000 pcs) ERJPA2 1.00±0.05 0.50±0.05 0.20±0.15 0.25±0.10 0.35±0.05 ERJPA3 1.60±0.15 0.80+0.15/-0.05 0.15+0.15/-0.10 0.25±0.10 0.45±0.10 ERJP03 1.60±0.15 0.80+0.15/-0.05 0.15+0.15/-0.10 0.30±0.15 0.45±0.10 ERJP06 2.00±0.20 1.25±0.10 0.25±0.20 0.40±0.20... - Page 5 Anti-Surge Thick Film Chip Resistors Performance Test Item Performance requirements ⊿R Test conditions Resistance Within specified tolerance 20 ℃ T. C. R. Within specified T. C. R. +25 ℃ / +155 ℃ (ERJPA2 : +125 ℃) ERJP06 : Rated voltag× 1.77, 5 s ±2 % Overload Only when it is ERJP03 (D),...
- Page 6 ■ The technical information contained in this catalog is intended to show only typical operation and application circuit examples of this product. This catalog does not guarantee that such information does not infringe upon the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been granted.
- Page 7 Matters to Be Observed When Using This Product Matters to Be Observed When Using This Product (Fixed resistor) Use environments and cleaning conditions ■ This product (fixed resistor) is not designed for use in specific environments. Using the resistor in the following specific environments or service conditions may affect the performance/reliability of the resistor.
-
Page 8: Mounting Conditions
Matters to Be Observed When Using This Product Reliability and product life A capacitor conforming to "AEC-Q200" refers to a capacitor having passed some or all of evaluation test items defined in AEC-Q200. To know the detailed specifications of each capacitor or specific evaluation test scores, please contact us. We issue a delivery specification sheet for each product ordered. -
Page 9: Storage Conditions
Matters to Be Observed When Using This Product / Reference Information ■ Soldering the resistor with too much solder or too little solder results in the poor reliability of the solder connection of the resistor. Use the proper volume of solder in the soldering process. Sufficiently check for the volume of solder used. ■...