Table of Contents
Advertisement
4
5
6
7
8
Product manual - IRB 6710
3HAC085695-001 Revision: A
Action
CAUTION
Whenever parting/mating motor and gear-
box, the gears may be damaged if excess-
ive force is used.
Use caution and lower the motor into posi-
tion on the guide pins, while at the same
time rotating the motor pinion slightly.
Make sure that:
•
the motor pinion is properly mated
to the gear of the gearbox.
•
the motor pinion does not get dam-
aged.
Remove the guide pins.
Secure the motor with its attachment
screws.
Perform a leak-down test.
© Copyright 2023 ABB. All rights reserved.
5.7.6 Replacing the axis-6 motor
Note
Rotation tool M3, 3HAB7887-1
xx2000000378
Hex socket head cap screw: M8x30 12.9
Gleitmo 603+Geomet 500 (4 pcs)
Tightening torque: 10 Nm
xx2000000377
See
Performing a leak-down test on
page
178.
Continues on next page
5 Repair
Continued
425
Advertisement
Table of Contents
Troubleshooting
