Table of Contents
Advertisement
Cont. Bracket
Shoots multiple images while automatically shifting the exposure from
base to darker and then to lighter. You can select an image that suits your
purpose after recording.
1
Select
• Turn the drive mode dial while holding down the drive mode dial lock
release button.
2
MENU
[Bracket Type] [Cont. Bracket] desired mode.
For example, the camera shoots a total of three images continuously
with an exposure value shifted by plus or minus 0.3 EV when
[Cont. Bracket: 0.3EV 3 Image] is selected.
• The setting screen for [Bracket Type] can be displayed by pressing the
Fn button.
3
Adjust the focus and shoot the image.
• The base exposure is set at the first shot.
• Keep pressing and holding the shutter button until bracket shooting
is finished.
Note
• The last shot is shown on the auto review.
• When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is
changed by adjusting the ISO value. If a setting other than [ISO AUTO] is
selected, the exposure is changed by adjusting the shutter speed.
• When the exposure is compensated, the exposure is shifted based on the
compensated value.
• Bracket shooting is unavailable in the following shooting modes:
– [Intelligent Auto]
• When the flash is used, the product performs flash bracket shooting, which
shifts the amount of flash light even if [Cont. Bracket] is selected. Press the
shutter button for each image.
GB
84
(Bracket) by turning the drive mode dial.
(Camera Settings 1) [Bracket Settings]
Advertisement
Table of Contents
