hit counter script
Sharp Notevision XG-C335X Setup Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. Notevision XG-C335X
  6. Setup manual
Sharp Notevision XG-C335X Setup Manual

Sharp Notevision XG-C335X Setup Manual

Lcd projector
Hide thumbs Also See for Notevision XG-C335X:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Operating Manual
SETUP MANUAL
Setting up the Screen .......................................... 2
Throw Distance ....................................................... 3
Standard Zoom Lens .............................................. 4
Wide-zoom Lens (AN-C12MZ) ............................... 5
Tele-zoom Lens (AN-C18MZ) ................................. 6
Tele-zoom Lens (AN-C27MZ) ................................. 7
Tele-zoom Lens (AN-C41MZ) ................................. 8
Changing the Lens .............................................. 9
Connecting Pin Assignments .......................... 11
Computer control .................................................. 13
Communication conditions ................................... 13
Basic format .......................................................... 13
Commands ........................................................... 14
Network settings on the computer ....................... 18
Controlling the Projector via LAN .................... 24
(Version 5.0 or later) ................................... 24
Controlling the Projector (Control) ....................... 25
(Settings & Adjustments) ............................ 26
(Network - General) .................................... 27
(Mail - Originator Settings) ........................ 27
When Connecting Using RS-232C ....................... 29

LCD PROJECTOR

MODEL
XG-C430X
XG-C335X
XG-C330X
When Connecting Using Telnet ............................ 30
SETUP MENU (Main Menu) ................................. 31
ADVANCED SETUP MENU ................................. 31
Set Items ............................................................... 32
IP Address Setting ([1]IP Address) ...................... 34
User Name Setting ([4]User Name) ..................... 34
Password Setting ([5]Password) .......................... 35
([6]RS-232C Baud Rate) ............................ 35
([D]Disconnect All) ..................................... 36
([A]Advanced Setup) .................................. 36
(ADVANCED[0]Search Port) ...................... 38
via LAN ....................................................... 39
Troubleshooting ................................................. 41
Dimensions ........................................................ 44

Advertisement

Table of Contents
loading

Related Manuals for Sharp Notevision XG-C335X

Summary of Contents for Sharp Notevision XG-C335X

  • Page 1: Table Of Contents

    1. Connecting the Projector to a Computer ... 19 2. Setting an IP Address for the Computer ... 20 3. Setting up a Network Connection for the Projector ... 22 Controlling the Projector via LAN ... 24 Controlling the Projector Using Internet Explorer (Version 5.0 or later) ...

  • Page 2: Setting Up The Screen

    Doing so will eliminate the need for Keystone correction and provide the best image quality. Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

  • Page 3: Screen Size And Projection Distance

    The projection screen size varies according to the distance from the lens of the projector to the screen. The optional lenses from Sharp are also available for specialized application. Please see your nearest Sharp Authorized Projector Dealer to details on all the lenses. (Refer to the lens operation manual when using a lens.)

  • Page 4: Standard Zoom Lens

    Screen Size and Projection Distance Standard Zoom Lens F1.7-F1.9, f=28.0-33.6 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 500'' (1270 cm) 1016 cm (400'') 762 cm (300'') 300'' (762 cm) 610 cm (240'') 457 cm (180'') 270'' (686 cm) 549 cm (216'') 411 cm (162'') 250'' (635 cm) 508 cm (200'') 381 cm (150'') 200'' (508 cm) 406 cm (160'') 305 cm (120'')

  • Page 5: Wide-Zoom Lens (An-C12Mz)

    Wide-zoom Lens (AN-C12MZ) F2.2-F2.7, f=24.5-30.7 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 250'' (635 cm) 508 cm (200'') 381 cm (150'') 200'' (508 cm) 406 cm (160'') 305 cm (120'') 150'' (381 cm) 305 cm (120'') 229 cm 100'' (254 cm) 203 cm (80'') 152 cm...

  • Page 6: Tele-Zoom Lens (An-C18Mz)

    Screen Size and Projection Distance Tele-zoom Lens (AN-C18MZ) F1.7-F2.2, f=36.5-46.3 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 250'' (635 cm) 508 cm (200'') 381 cm (150'') 200'' (508 cm) 406 cm (160'') 305 cm (120'') 150'' (381 cm) 305 cm (120'') 229 cm 100'' (254 cm) 203 cm...

  • Page 7: Tele-Zoom Lens (An-C27Mz)

    Tele-zoom Lens (AN-C27MZ) F2.0-F2.8, f=53.8-82.9 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 250'' (635 cm) 508 cm (200'') 381 cm (150'') 200'' (508 cm) 406 cm (160'') 305 cm (120'') 150'' (381 cm) 305 cm (120'') 229 cm 100'' (254 cm) 203 cm (80'') 152 cm...

  • Page 8: Tele-Zoom Lens (An-C41Mz)

    Screen Size and Projection Distance Tele-zoom Lens (AN-C41MZ) F2.1-F2.8, f=83.5-117.2 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 250'' (635 cm) 508 cm (200'') 381 cm (150'') 200'' (508 cm) 406 cm (160'') 305 cm (120'') 150'' (381 cm) 305 cm (120'') 229 cm 100'' (254 cm) 203 cm (80'')

  • Page 9: Changing The Lens

    Changing the Lens Info • Before changing the lens, turn off the power of the projector and remove the power cord from the wall outlet. • Do not attempt to change the lens while the projector is mounted on the ceiling.
  • Page 10 Replace the lens housing cover. • If the lens housing cover is not secured to the projector, you will not be able to turn the power on. Lens mount...

  • Page 11: Connecting Pin Assignments

    Pin No. Signal Name Receive Data Send Data Signal Ground Request to Send Clear to Send Pin No. Signal Pin No. Projector Computer Pin No. Pin No. Signal RX– Component Input/Output 1. P 2. Y 3. P 4. Not connected 5.
  • Page 12 Connecting Pin Assignments DVI-D Input Terminal Pin No. Signal T.M.D.S. Data 2– T.M.D.S. Data 2+ T.M.D.S. Data 2 Shield Not connected Not connected DDC Clock DDC Data Not connected T.M.D.S. Data 1– T.M.D.S. Data 1+ T.M.D.S. Data 1 Shield Not connected Pin No.

  • Page 13: Rs-232C Specifications And Commands

    • After sending an input selection or picture adjustment command and then receiving an “OK” response code, the projector may take some time to process the command. If a second command is sent while the projector is still processing the first command, you may receive an “ERR” response code. If this happens, try resending the second command.

  • Page 14: Commands

    RS-232C Specifications and Commands Commands Example: When turning on the projector, make the following setting. CONTROL CONTENTS Power Off Power On Power Status Projector Condition Lamp Status Lamp Power Status Lamp Quantity Lamp Usage Time (Hour) Lamp Life (Percentage) Model Name Check Model Name Check Serial No.
  • Page 15 COMPUTER 1 Tint (– 30 - + 30) COMPUTER 1 Red (– 30 - 30) COMPUTER 1 Blue (– 30 - + 30) COMPUTER 1 Sharp (– 30 - + 30) COMPUTER 1 CLR Temp *3 COMPUTER 1 Progressive : 2D...
  • Page 16 Video Tint (– 30 - + 30) Video Red (– 30 - + 30) Video Blue (– 30 - + 30) Video Sharp (– 30 - + 30) Video CLR Temp *3 Video Progressive : 2D Video Progressive : 3D...
  • Page 17 CONTROL CONTENTS Internal Speaker : Off Internal Speaker : On Audio Out : FAO Audio Out : VAO PRJ Mode : Reverse Off PRJ Mode : Reverse On PRJ Mode : Invert Off PRJ Mode : Invert On Fan Mode : Normal Fan Mode : High Monitor Out : Disable Monitor Out : Enable...

  • Page 18: Setting Up The Projector Network Environment

    If the network is already constructed, the projector’s network settings may need to be changed. Please consult your network administrator for assistance with these settings. You can make network settings both on the projector and on the computer. The following procedure is for making settings on the computer.

  • Page 19: Connecting The Projector To A Computer

    1. Connecting the Pro- jector to a Computer Establishing a one-to-one connection from the projector to a computer. Using a LAN cable (Category 5, cross-over type) you can config- ure the projector via the computer. Disconnect the computer’s LAN cable from the existing network.

  • Page 20: Setting An Ip Address For The Computer

    Setting up the Projector Network Environment 2. Setting an IP Address for the Computer The following describes how to make settings in Windows ® XP (Professional or Home Edi- tion). Log on the network using the administrator’s account for the computer.
  • Page 21 IP address : 192.168.150.3 Subnet mask : 255.255.255.0 Default gateway : (Do not input any values.) Note • The factory default settings for the projector are as follows: DHCP Client : Off IP address : 192.168.150.2 Subnet mask : 255.255.255.0 Default gateway : 0.0.0.0...

  • Page 22: Setting Up A Network Connection For The Projector

    Settings for such items as the projector’s IP address and subnet mask are compatible with the existing network. Set each item on the projector as follows. (See page 53 of the projector’s operation manual for setting.) DHCP Client : Off IP Address : 192.168.150.002...
  • Page 23 • Change the IP address of the setting computer back to its original address, which you have noted down in Step 6-1 on page 21, and then connect the computer and the projector to the network. Setting up the Projector Network Environment...

  • Page 24: Controlling The Projector Via Lan

    Controlling the Projector via LAN After connecting the projector to your network, enter the projector IP address in “Address” on Internet Explorer (version 5.0 or later) using a computer on the network to start a setup screen that will enable control of the projector via the network.

  • Page 25: Confirming The Projector Status (Status)

    Wait for a moment and then operate again. • You cannot operate this page while the pro- jector is warming up. • While the projector is in standby mode, you can only control “Power ON”. • For details about each item, refer to the...

  • Page 26: Setting And Adjusting The Projector (Settings & Adjustments)

    Setting and Adjusting the Projector (Settings & Adjustments) Example: “Picture” screen display for INPUT 1 On these screens, you can make projector settings or adjustments. You can set or adjust the following items : Picture Mode • • • • •...

  • Page 27: Making General Settings For The Network (Network - General)

    Note • After setting items, wait for 10 seconds and then re-access. • Projector Name can be up to 12 characters. • You can input the characters below : A-Z, 0-9, -, _, (,), space (When “a-z” are input, they are converted to “A-Z”...

  • Page 28: Setting Error Items And Destination Addresses To Which E-Mail Is To Be Sent When An Error Occurs (Mail - Recipient Settings)

    (Service & Support – Access URL) On this screen, you can make settings of the URL and error items that are to be displayed when the projector has generated an error. Items Description Access Set the URL that is to be displayed when an error occurs.

  • Page 29: Setting Up The Projector Using Rs-232C Or Telnet

    Setting up the Projector Using RS-232C or Telnet Connect the projector to a computer using RS-232C or Telnet, and open the SETUP MENU on the computer to carry out various settings for the projector. When Connecting Using RS-232C Launch general purpose terminal emulator.

  • Page 30: When Connecting Using Telnet

    Setting up the Projector Using RS-232C or Telnet When Connecting Using Telnet Click “Start” from the Windows top and select “Run”. Enter “telnet 192.168.150.2” in the text box that opens up. (If the IP address of the projector is 192.168.150.2.) Click the “OK”...

  • Page 31: Setup Menu (Main Menu)

    [6]RS-232C Baud Rate (Factory default setting : 9600 bps) Baud rate settings for the RS-232C terminals. (Page [7]Projector Name It is possible to assign a projector name. (Page 35) [8]DHCP Client DHCP Client settings. (Page 35) [A]Advanced Setup Enters ADVANCED SETUP MENU. (Page 36) [D]Disconnect All Disconnect all connections.

  • Page 32: View Setting Detail List ([V]View All Setting)

    Setting up the Projector Using RS-232C or Telnet Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the details to be set. Setting is carried out one item at a time, and saved at the end.

  • Page 33: Save Settings And Quit ([S]Save & Quit)

    Apply New setting...Done. 1 1 1 1 1 Enter “s” and press the “Enter” key. 2 2 2 2 2 Enter “y” and press the “Enter” key. Setting up the Projector Using RS-232C or Telnet Quit without Saving Set- tings Quit menu without saving setting values.

  • Page 34: Ip Address Setting ([1]Ip Address)

    Display gateway address after change (*). Note • If the values for IP Address, Subnet Mask or Gate- way of the projector have been changed via Telnet, the computer cannot be connected to the projector depending on the computer’s network settings.

  • Page 35: Password Setting ([5]Password)

    2 2 2 2 2 Select and enter the number 0, 1 or 2 and press the “Enter” key. Display set baud rate (*). Note • Set the projector’s baud rate to the same rate as that used by the computer. Setting up the Projector Using RS-232C or Telnet Projector Name Setting ([7]Projector Name) It is possible to assign a projector name.

  • Page 36: Disconnecting All Connections ([D]Disconnect All)

    1 1 1 1 1 Enter “a” and press the “Enter” key. Setting Auto Logout Time (ADVANCED[1]Auto Logout Time) If there is no input after a fixed time, the projector automatically disconnects network connection using the Auto Logout function. It is possible to set the time until the projector is automatically disconnected in units of a minute (from 1 to 65535 minutes).

  • Page 37: Carrying Out Network Ping Test (Advanced[5]Network Ping Test)

    (ADVANCED[6]Accept IP Addr(1) - [8]Accept IP Addr(3)) It is possible to improve security of the projector by allowing connection from only a prescribed IP ad- dress. It is possible to set up to three IP addresses allowing connection to the projector.

  • Page 38: Setting Of Search Port (Advanced[0]Search Port)

    2 2 2 2 2 Enter “y” and press the “Enter” key. Note • If the values for IP Address, Subnet Mask or Gate- way of the projector have been returned to the default settings via Telnet, the computer cannot be connected to the projector depending on the computer’s network settings.

  • Page 39: Resetting The Lamp Timer Of The Projector Via Lan

    Resetting the Lamp Timer of the Projector via LAN When the projector is connected to a network, you can use HyperTerminal or a similar com- munications program to send a command to reset the lamp timer. The example below uses ®...
  • Page 40 Resetting the Lamp Timer of the Projector via LAN Click “Properties” on the “File” menu. Click the “Settings” tab, and then click “ASCII Setup”. Select the check boxes next to “Send line ends with line feeds”, “Echo typed characters locally”, and “Append line feeds to in-...

  • Page 41: Troubleshooting

    \ Check that the LAN cable is a Category 5 cable. \ Check that the LAN cable is a cross-over cable when connecting the projector to a computer directly. Check that the LAN cable is a straight-through cable when connecting the projector with a network device such as a hub.
  • Page 42 Troubleshooting \ Take the following steps for checking the network settings for the computer. 1. Open a command prompt (MS-DOS Prompt). • In the case of Windows order. • In the case of Windows Prompt” in order. • In the case of Windows Prompt”...
  • Page 43 5. To return to the Windows A connection cannot be made because you have forgotten your user name or your password. \ Initialize the settings. (See page 54 of the projector’s operation manual.) \ After the initialization, carry out setting again.

  • Page 44: Dimensions

    Dimensions Units: inches (mm) Side View Front View Bottom View Rear View Top View (326) (88.5) (74.5) (148) (148) (73.5) (75) (27.25) Side View...
  • Page 45 Projector and Lens Dimensions [When AN-C12MZ is installed] [When AN-C18MZ is installed] [When AN-C27MZ is installed] [When AN-C41MZ is installed] Unit : inches (mm) - 15 (389 - 391) Unit : inches (mm) - 12 (307 - 309) Unit : inches (mm)

This manual is also suitable for:

Notevision xg-c430xXg-c430xXg-c330x

Table of Contents