Table of Contents
Advertisement
14 WHEELS, TIRES
14.3
102
H03730-11
Removing the rear wheel
H03732-10
–
Jack up the front wheel into the fork, position it, and insert
the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
3
Tighten screws
.
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Manually press the brake caliper toward the brake disc to
push back the brake piston.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake pis-
ton.
–
1
Remove nut
.
–
2
Take off chain adjuster
enough to allow the rear wheel to be pushed forward.
–
Push the rear wheel forward as far as possible. Remove the
chain from the rear sprocket.
Info
Cover the components to protect them against dam-
age.
Warning
Danger of accidents Damaged brake discs reduce
the braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Hold the rear wheel and remove the wheel spindle. Take the
rear wheel out of the link fork.
2
.
M20x1.5
35 Nm (25.8 lbf ft)
p. 56)
M8
15 Nm (11.1 lbf ft)
p. 56)
3
. Pull out wheel spindle
far
- Quick Links:
- Table of Contents
- Service
- All te 300I Models
Hide quick links:
Advertisement
Table of Contents
