Sony SS-SR3000 - Speaker System Manual

Connection

• Before connecting, turn off the amplifier to avoid damaging the speaker system.
• This speaker system is driven best by an amplifier or receiver rated as per the wattage indicated in the specification section.

Note
Avoid driving the speaker system continuously with a wattage exceeding the maximum input power of this speaker system.

Precautions

• Do not attempt to open the enclosure or remove speaker units. There are no user-serviceable parts inside.
• Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system.
• Periodically wipe the cabinet with a soft cloth. Do not use any type of scouring powder, abrasive pad or solvent.

Speaker Placement

Please note that room acoustics can often produce large difference in the sound for small changes in speaker placement.

• Set up your speaker system on a hard, flat place.
• Place the speaker system against a hard wall with its back about 10 cm (4 in) away from a wall. The proportion of bass increases as you move a speaker closer to intersecting room surfaces (wall and wall, etc.).