Table of Contents
Advertisement
RAVENNA IO Parameters
Once the Enable MADI over RAVENNA option is turned on, you can edit the name and other parameters for
the 64 signals.
1.
Use the Madi 1 (RAVENNA intern) Input and Output tabs to access the parameters.
Note that the MADI ports are numbered from right to left in the configuration. Therefore, MADI 4 and MADI 3
relate to the two external MADI ports (on a 2-port MADI card), while MADI 2 and MADI 1 are the spare internal
ports. MADI 1 is always reserved internally for RAVENNA.
Most of the parameters are handled in an identical manner to other signals. See MADI IO for details.
When defining the names, every input can generate a RAVENNA Destination label, and every output a
RAVENNA Source Label. The labels can be used to define a default source stream for a RAVENNA input or
group of inputs. To implement this feature, the Name field must use the format [GroupName]:[SignalName],
where each label field is a maximum of 8 characters. Every label must be unique within the system network.
Output Parameters
·
Name - defines the signal name. Use the format [GroupName]:[SignalName] to generate a RAVENNA
Source Label.
·
Type - defines the format of the output: mono, stereo, etc. This should match the Stream Size.
·
Matrix enable - by turning ON the Matrix Enable option, the output can be controlled by a matrix.
·
Default Audio - alternatively, if Matrix Enable is OFF, a permanent audio source can be assigned to
the output. Note that the Default Audio setting is ignored when Matrix Enable is ON.
·
Transparent - select this checkbox to set the output to be "transparent".
·
RAVENNA Stream Size - defines the number of audio channels used by the stream. This should
match the audio output format (Type).
Input Parameters
·
Name - defines the signal name. Use the format [GroupName]:[SignalName] to generate a RAVENNA
Destination Label.
·
Type - defines the format of the input: mono, stereo, etc. This should match the Stream Size.
·
Matrix enable - by turning ON the Matrix Enable option, the input can be controlled by a matrix.
·
Transparent - select this checkbox to set the output to be "transparent".
·
Default RAVENNA Source Label (optional) - defines the stream you wish subscribe to by entering its
RAVENNA Source Label. This option can be used to permanently link the receiver to a stream. To use
this feature, you must follow the [GroupName]:[SignalName] labeling convention described above.
148/459
Madi 1 (RAVENNA intern) Outputs
Madi 1 (RAVENNA intern) Inputs
Version: 6.6.0/2
9. Audio IO
crystal User Manual
Advertisement
Table of Contents
