hit counter script
Bosch WAV28KH1BY User Manual And Installation Instructions

Bosch WAV28KH1BY User Manual And Installation Instructions

Hide thumbs Also See for WAV28KH1BY:
Table of Contents

Advertisement

Quick Links

Washing machine
WAV28KH1BY
[en]
User manual and installation
instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WAV28KH1BY

  • Page 1 Washing machine WAV28KH1BY [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Table of contents 1 Safety ..........   4 10 Before using for the first time........   34 1.1 General information.... 4 10.1 Starting an empty washing 1.2 Intended use....... 4 cycle ........ 34 1.3 Restriction on user group... 4 1.4 Safe installation ...... 5 11 Laundry........   35 1.5 Safe use ........ 7 11.1 Preparing the laundry ..... 35 1.6 Safe cleaning and mainten-...
  • Page 3 19 Troubleshooting.......    57 15.2 Dispenser contents .... 42 15.3 Basic dosage ...... 43 20 Transportation, storage and disposal ........   68 16 Home Connect ......   43 20.1 Removing the appliance .. 68 16.1 Home Connect settings.. 43 20.2 Inserting the transit bolts.. 68 16.2 Connecting the appliance 20.3 Using the appliance again .. 69 to a WLAN home network (Wi-Fi) with WPS function .. 43...
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. ▶ Rinse eyes and/or skin thoroughly with clean water if they come into contact with detergents or care products.
  • Page 10: Preventing Material Damage

    en Preventing material damage Make sure that the valve housing ▶ Preventing material damage 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Follow these instructions to avoid ma- Preventing material damage Ensure that the inner diameter of terial damage and damage to the ap-...
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Do not use hard scouring pads or Add → Page 37 detergent based on ▶ cleaning sponges. the laundry's degree of soiling. Clean the appliance with nothing ▶ a For light to normal soiling, a smal- but water and a soft, damp cloth. ler amount of detergent is suffi- Remove all detergent residue, ▶...
  • Page 12: Energy Saving Mode

    en Installation and connection ATTENTION! The appliance comes with an Aqua- Objects remaining in the drum that Sensor. are not designed for operation with a During the rinse cycle, the Aqua- the appliance may cause material Sensor checks the degree of tur- damage and damage to the appli- bidity of the rinsing water, and ad- ance.
  • Page 13: Contents Of Package

    Installation and connection en 4.2 Contents of package After unpacking all parts, check for any damage in transit and completeness of the delivery. Washing machine WARNING Risk of electric shock! Accompanying documents The appliance contains live parts. Touching live parts is dangerous. Elbow for fixing the water out- Do not operate the appliance ▶...
  • Page 14: Removing The Transit Bolts

    en Installation and connection ATTENTION! Installation loca- Requirements If the appliance is installed in areas tion exposed to frost or outdoors, frozen On a wall Do not trap the residual water may damage the appli- hoses between ance and frozen hoses may crack or the wall and the split.
  • Page 15: Connecting The Appliance

    Installation and connection en Unscrew and remove all four Put on the four cover caps. screws for the transit bolts with a WAF 13 wrench. Press down on the four cover caps. Pull the power cord out of the holder. 4.5 Connecting the appliance Remove the four sleeves.
  • Page 16: Aligning The Appliance

    en Installation and connection Connect the water inlet hose to a Drainage into a Fix and secure tap (26.4 mm = 3/4"). washbasin the water outlet using an elbow. ¾˝ min. 10 mm Drainage into a Fix and secure plastic pipe with the water outlet min.
  • Page 17: Connecting The Appliance To The Electricity Supply

    Installation and connection en To align the appliance, turn the ap- The connection details of the appli- pliance feet. Check that the appli- ance can be found under Tech- ance is level using a spirit level. nical data → Page 73. Check the mains plug is inserted properly.
  • Page 18 en Familiarising yourself with your appliance Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
  • Page 19: Familiarising Yourself With

    Familiarising yourself with your appliance en 5.2 Detergent drawer Manual dosing compartment / : Dispenser for fabric softener or detergent : Dispenser for detergent 5.3 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 38...
  • Page 20: Display

    en Display Display 6 Display The display shows the current settings, options or relevant information. Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time The programme end has been set and the remaining number of hours is displayed.
  • Page 21 Display en Display Designation Description End of pro- Programme status gramme ⁠ Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 41 ⁠...
  • Page 22 en Display Display Designation Description 50 ml Basic dosage Basic dosage for detergent or fabric softener. → "Basic dosage", Page 43 ⁠ Foam detection The appliance has detected too much system foam. ⁠ Door The door is unlocked and can be opened. ⁠ ¡...
  • Page 23: Buttons

    Buttons en Buttons 7 Buttons The selection of programme settings depends on the programme that is set. Buttons You can see the selection options for each programme in the overview for → "Programmes", Page 26. Button Selection Description ⁠   Start / Reload ¡ Start Start, cancel or pause the pro- gramme.
  • Page 24 en Buttons Button Selection Description ⁠ (mains switch) ¡ Switch on Switch the appliance on or off. ¡ Switch off Remote Start  ⁠ ¡ Activate If you briefly press the button, the ap- pliance will be enabled for remote ¡ Deactivate start via the Home Connect app ¡...
  • Page 25 Buttons en Button Selection Description Extra Rinse  ⁠ ¡ Activate Activate or deactivate an additional rinse cycle. ¡ Deactivate Recommended for particularly sensit- ive skin or in regions with very soft water.
  • Page 26 en Programmes ⁠ ⁠ i-DOS   ⁠ ⁠ i-DOS   ⁠ Prewash  ⁠ Spin Speed Reduction  ⁠ ⁠ ⁠ (Rinse Hold) ⁠ Extra Rinse  ⁠ ⁠ SpeedPerfect ⁠ 1400 Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
  • Page 27 Programmes en ⁠ ⁠ i-DOS   ⁠ ⁠ i-DOS   – Prewash  ⁠ Spin Speed Reduction  ⁠ – ⁠ (Rinse Hold) – Extra Rinse  ⁠ – SpeedPerfect ⁠ 1400 Max. spin speed (rpm) – Max. temperature (°C) Max. load (kg)
  • Page 28 en Programmes ⁠ i-DOS   ⁠ i-DOS   Prewash  ⁠ Spin Speed Reduction  ⁠ ⁠ (Rinse Hold) Extra Rinse  ⁠ – SpeedPerfect ⁠ 1200 1400 Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
  • Page 29 Programmes en – ⁠ i-DOS   – – – ⁠ i-DOS   – – – Prewash  ⁠ Spin Speed Reduction  ⁠ – ⁠ (Rinse Hold) – – Extra Rinse  ⁠ – – – SpeedPerfect ⁠ 1400 1400 Max. spin speed (rpm) –...
  • Page 30 en Programmes – ⁠ i-DOS   – ⁠ i-DOS   – – Prewash  ⁠ Spin Speed Reduction  ⁠ – ⁠ (Rinse Hold) – – Extra Rinse  ⁠ – – SpeedPerfect ⁠ – 1200 Max. spin speed (rpm) – – Max. temperature (°C) Max.
  • Page 31 Programmes en ⁠ i-DOS   ⁠ i-DOS   Prewash  ⁠ Spin Speed Reduction  ⁠ ⁠ (Rinse Hold) Extra Rinse  ⁠ SpeedPerfect ⁠ 1400 Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
  • Page 32 en Programmes – ⁠ i-DOS   – ⁠ i-DOS   – Prewash  ⁠ Spin Speed Reduction  ⁠ – ⁠ (Rinse Hold) – Extra Rinse  ⁠ – – SpeedPerfect ⁠ Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
  • Page 33 Programmes en ⁠ ⁠ i-DOS   ⁠ ⁠ i-DOS   – Prewash  ⁠ Spin Speed Reduction  ⁠ ⁠ ⁠ (Rinse Hold) ⁠ Extra Rinse  ⁠ ⁠ SpeedPerfect ⁠ 1200 Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
  • Page 34: Accessories

    en Accessories Accessories 9 Accessories Use original accessories. These have been made especially for your appliance. Accessories Order number Water inlet hose exten- Extend the water inlet WMZ2381 sion hose for cold water or AquaStop (approx. 2.50 Fixing brackets Improves the stability of WMZ2200 the appliance.
  • Page 35: Laundry

    Laundry en Add washing powder to the Laundry 11 Laundry manual dosing compartment. Laundry 11.1 Preparing the laundry Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely. ATTENTION! Objects remaining in the laundry may damage the laundry and the drum.
  • Page 36: Sorting Laundry

    en Laundry Wash laundry of the same 11.2 Sorting laundry type of fabric and fibre to- Note: Please read the information in gether. the Safety → Page 4 and Preventing – Care symbols on the care labels material damage → Page 10 sections → Page 36 to ensure that you use the appliance –...
  • Page 37: Detergents And Care

    Detergents and care products en Notes Detergents and care products 12 Detergents and care ¡ only use liquid detergents that are self-flowing products ¡ Do not mix different liquid deter- gents Detergents and care products Note: Please read the information in ¡ Do not mix detergent and fabric the Safety → Page 4 and Preventing softener material damage → Page 10 sections...
  • Page 38: Basic Operation

    en Basic operation Water hardness Hardness range Total hardness in mmol/ German degrees in °dH soft (I) 0–1.5 0–8.4 medium (II) 1.5– 2.5 8.4–14 hard (III) over 2.5 over 14 Example of a manufacturer's instructions for detergent These example values refer to a standard load of 4–5 kg.
  • Page 39: Setting A Programme

    Basic operation en Requirement: The laundry is pre- 13.2 Setting a programme pared and sorted. Set the programme selector to the → "Laundry", Page 35 required programme. Open the door. → "Programmes", Page 26 Make sure that the drum is empty. If necessary, adjust the pro- Load the laundry unfolded into the gramme settings → Page 39.
  • Page 40: Starting The Programme

    en Basic operation Pull out the detergent drawer. Add or remove laundry. Pour in detergent. Close the door. → "Detergent drawer", Page 19 Press ⁠   Start / Reload. If required, add the care product. 13.9 Cancelling the pro- Push in the detergent drawer. gramme 13.6 Starting the programme Once the programme has started,...
  • Page 41: Switching Off The Appli- Ance

    Childproof lock en Remove the laundry. Childproof lock 14 Childproof lock Secure your appliance against being Childproof lock operated unintentionally using the controls. 14.1 Activating the childproof lock Press and hold the two Child ▶ ⁠   3 sec. buttons for ap- Lock  prox.
  • Page 42: Intelligent Dosing System

    en Intelligent dosing system Pour liquid detergent and fabric Intelligent dosing system 15 Intelligent dosing sys- softener into the relevant dis- pensers. → "Detergent drawer", Page 19 The optimum quantities of liquid de- Intelligent dosing system tergent and fabric softener are dis- pensed automatically depending on the programme and settings.
  • Page 43: Basic Dosage

    Home Connect  en The Home Connect app guides you 15.3 Basic dosage through the entire login process. Fol- The basic dosage depends on the low the instructions in the Home Con- manufacturer's instructions for the de- nect app to configure the settings. tergent, the water hardness and the Tips degree of soiling of the laundry.
  • Page 44: (Wi-Fi) With Wps Function

    en Home Connect Press the WPS button on the network information for the WLAN router within the next 2 minutes. home network (Wi-Fi) to your appli- ance. Take note of the information in the documents for your router. Requirement: The Home Connect flashes in the display. app is open and you have logged on.
  • Page 45: Connecting Your Appliance To The Home Connect App

    Home Connect  en Set the programme to position 3. a The display shows APP . Press ⁠   Start / Reload. a The appliance connects to the Home Connect app. Once your appliance is displayed in the Home Connect app, carry out the last steps in the Home Connect app.
  • Page 46: Activating Wi-Fi On The Appliance

    en Home Connect a If the appliance has connected to ¡ Switch off the appliance. the energy manager successfully, ¡ Power failure. the display shows con and ⁠ . 16.6 Activating Wi-Fi on the Activate Flex Start if you want the smart energy system (energy man- appliance ager) to start up your appliance.
  • Page 47: Resetting The Appliance Network Settings

    Home Connect  en Set the programme to position 6. 16.11 Data protection a Upd appears on the display. Please see the information on data Press ⁠   Start / Reload. protection. a The software update is installed. The first time your appliance is a If End is shown on the display, the registered on a home network software update is installed.
  • Page 48: Basic Settings

    en Basic settings Basic settings 17 Basic settings You can configure the appliance to meet your needs. Basic settings 17.1 Overview of basic settings Below is an overview of the basic settings on your appliance. Basic setting Programme posi- Value Description tion End signal 0 (off) Set the volume of 1 (quiet)
  • Page 49: Changing The Basic Set- Tings

    Cleaning and servicing en 17.2 Changing the basic set- with nothing but water and a tings damp cloth. Set the programme selector to po- Remove all de- Fresh deposits sition 1. tergent residue, are easier to re- spray residue or move without other residues leaving any immediately.
  • Page 50: Cleaning The Detergent Drawer

    en Cleaning and servicing Unclip the detergent drawer lid 18.3 Cleaning the detergent and remove it. drawer If you change detergent or the deter- gent drawer is dirty, clean the deter- gent drawer and the pump unit of the intelligent dosing system. Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections...
  • Page 51 Cleaning and servicing en ATTENTION! The pump unit con- tains electrical components. Do not clean the pump unit in the ▶ dishwasher and do not immerse it in water. Protect the electrical connection ▶ on the rear against water, deter- gent and fabric softener residue. Clean the pump unit with a damp cloth.
  • Page 52: Descaling

    en Cleaning and servicing Remove the maintenance flap. 18.4 Descaling If you add detergent correctly, you do not need to descale your appliance. If you still wish to use descaler, follow the manufacturer's instructions for use. ATTENTION! The use of unsuitable descaling agents, e.g.
  • Page 53 Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Note: Please read the information in ures, the detergent solution gets the Safety → Page 4 and Preventing hot. material damage → Page 10 sections Do not touch the hot detergent to ensure that you use the appliance ▶...
  • Page 54: Cleaning The Intake Opening In The Rubber Gasket

    en Cleaning and servicing Ensure that both impellers can Insert the maintenance flap and turn. lock it into place. Insert the pump cap. Close the maintenance flap. Ensure that the parts of the ‒ 18.6 Cleaning the intake pump cap are correctly as- sembled.
  • Page 55: Cleaning The Water Outlet Hose At The Siphon

    Cleaning and servicing en Reattach the water outlet hose and 18.7 Cleaning the water outlet secure the connection point using hose at the siphon the hose clamp. If the water outlet hose at the siphon is dirty or the detergent solution is not being pumped out, you must clean these.
  • Page 56 en Cleaning and servicing Remove the water inlet hose from the tap. Clean the filter with a small brush. Connect the water inlet hose and check for leaks.
  • Page 57: Troubleshooting

    Troubleshooting en Troubleshooting 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 58 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. Connecting the appliance "E:36 / -25 / -26" Drain pump is blocked. → "Cleaning the drain pump", Page 52 ▶...
  • Page 59 Troubleshooting en Fault Cause and troubleshooting "E:35 / -10" Call the after-sales service. ▶ → "Customer Service", Page 70 ⁠ The detergent drawer has not been pushed in as far as it can go. Push the detergent drawer in as far as it will go. ▶...
  • Page 60 en Troubleshooting Fault Cause and troubleshooting The appliance is not There has been a power cut. working. Check whether the lighting in your kitchen or other ▶ appliances are working. The programme does You have not pressed  ⁠   Start / Reload. not start.
  • Page 61 Troubleshooting en Fault Cause and troubleshooting The door cannot Water level is too high. be opened. Start the ⁠   Drain programme. ▶ Power failure. Open the door using the emergency release. ▶ → "Emergency release", Page 68 The water is not drain- Drain pipe or water outlet hose is blocked. ing.
  • Page 62 en Troubleshooting Fault Cause and troubleshooting Water is not flowing The tap is turned off. in. Detergent is not Turn on the tap. ▶ being dispensed. The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or ▶...
  • Page 63 Troubleshooting en Fault Cause and troubleshooting Drum does not turn, Load detection is active. water does not flow in. Not a fault – no action required. ▶ Note: The load detection can take up to two minutes. Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶...
  • Page 64 en Troubleshooting Fault Cause and troubleshooting The spin programme Start the ⁠   Spin programme. ▶ does not start. Rushing, hissing Water is flushed under pressure into the detergent noise. drawer. Not a fault – normal operating noise. ▶ Longer, whirring noise Intelligent dosing system dispenses detergent or care before the start of the products.
  • Page 65 Troubleshooting en Fault Cause and troubleshooting The spin result is not Clean the drain pipe and the water outlet hose. ▶ satisfactory. The laun- Drain pipe or water drain hose is caught or jammed. dry is too wet/too Ensure that the drain pipe and water drain hose are ▶...
  • Page 66 en Troubleshooting Fault Cause and troubleshooting Detergent residue on Drain the dispenser. the dry laundry. → "Cleaning the detergent drawer", Page 50 Clean the dispenser. Refill the dispenser. → "Filling the dispenser", Page 42 Basic dosage is not correctly adjusted. If intelligent dosing is activated, reduce the basic ▶...
  • Page 67 Troubleshooting en Fault Cause and troubleshooting Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. Connect- ing the water inlet hose Tighten the screw connection. Water is leaking out at The water outlet hose is damaged.
  • Page 68: Transportation, Storage And Disposal

    en Transportation, storage and disposal Drain the remaining detergent 19.1 Emergency release solution. Releasing the door → "Cleaning the drain pump", Page 52 Requirement: The drain pump is Detach the hoses. empty. → Page 52 Empty the dispensers. ATTENTION! Escaping water may cause material damage. 20.2 Inserting the transit Do not open the door if you can ▶...
  • Page 69: Using The Appliance Again

    Transportation, storage and disposal en Insert all screws into the four 20.4 Disposing of old appli- transit bolts and tighten slightly. ance Valuable raw materials can be re- used by recycling. WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk.
  • Page 70: Customer Service

    en Customer Service 21.1 Product number (E-Nr.) Customer Service 21 Customer Service and production number If you have any queries on use, are Customer Service (FD) unable to rectify faults on the appli- You can find the product number (E- ance yourself or if your appliance Nr.) and the production number (FD) needs to be repaired, contact Cus- on the appliance's rating plate.
  • Page 71 Customer Service en during operation and the tap turned on afterwards. The tap only needs to be turned off if you are away from home for a long period, e.g. on holiday for several weeks.
  • Page 72 en Consumption values Consumption values 22 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
  • Page 73: Technical Specifications

    Declaration of Conformity 24 Declaration of Con- standby mode is set (Wi-Fi): formity 5 Min. ¡ Networked Robert Bosch Hausgeräte GmbH Declaration of Conformity standby mode hereby declares that the appliance (Wi-Fi): 1,50 W with Home Connect functionality Water pressure ¡ Minimum: meets the essential requirements and 100 kPa...
  • Page 74 en Declaration of Conformity 5 GHz WLAN (Wi-Fi): For indoor use only.
  • Page 76 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents