Table of Contents
Advertisement
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Secondary DNS Server Address
Use the same host name and do-
main name as IPv4
Perform dynamic updating of state-
ful addresses
Dynamically update the stateless
address
Dynamically update the manual ad-
dress
6
Click OK to display the Network page.
•
If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers
and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain
Note
Name, respectively.
452
Item
Specify the IP address of the secondary DNS server.
Activate when using the same DNS host and domain names
as for IPv4.
DNS Host Name
Specify the printer host name, up to 63 characters (1–63
characters). Use single-byte letters, numbers, and - (hy-
phens). Do not use numbers or - for the first character or - for
the last character.
DNS Domain Name
Specify the printer domain name, up to 63 characters. Use
single-byte letters, numbers, - (hyphens), and . (periods). Do
not use numbers, -, or . for the first character, or - or . for the
last character.
Activate this setting to automatically register the stateful ad-
dress with the DNS server.
Activate this setting to automatically register the stateless ad-
dress with the DNS server.
Activate this setting to automatically register the manual ad-
dress with the DNS server.
Details
iPF770
Default Setting
::
Off
NB-18GBip6xxxxxx
blank
Off
Off
Off
User's Guide
Advertisement
Table of Contents
Troubleshooting
