Table of Contents
Advertisement
Quick Links
2
EN
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions
contained on this page to ensure safe use of your new VCR.
CAUTIONS
WARNING:
DANGEROUS VOLTAGE INSIDE
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
The POWER
button does not completely shut off mains
power from the unit, but switches operating current on and off.
" " shows electrical power standby and " " shows ON.
CAUTION
This video cassette recorder should be used with AC
120V`, 60Hz only.
To prevent electric shocks and fire hazards, DO NOT use
any other power source.
The rating plate and safety caution are on the rear of the
unit.
IMPORTANT:
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
CAUTION
When you are not using the VCR for a long period of
time, it is recommended that you disconnect the power
cord from the AC outlet.
Dangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or fire
hazard, remove the power cord from the AC outlet prior to
connecting or disconnecting any signal lead or aerial.
Changes or modifications not approved by JVC could
void user's authority to operate the equipment.
Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder. However, only "VHS" recordings can
be played back in this model.
This model is equipped with SQPB (S-VHS QUASI PLAY-
BACK) that makes it possible to play back S-VHS recordings
with regular VHS resolution.
HQ VHS is compatible with existing VHS equipment.
Downloaded from:
https://www.usersmanualguide.com/
HOW TO USE THIS INSTRUCTION
MANUAL
● All major sections and subsections are listed in the Table
Of Contents on page 3. Use this when searching for
information on a specific procedure or feature.
● The Index on pages 34 –36 lists frequently-used terms,
and the number of the first page on which they are used
or explained in the manual. This section also illustrates
the controls and connections on the front and rear panel,
the front display panel and the remote control.
● The
mark signals a reference to another page for
instructions or related information.
● Operation buttons necessary for the various procedures
are clearly indicated through the use of illustrations at
the beginning of each major section.
BEFORE YOU INSTALL YOUR NEW
VCR . . .
. . . please read thoroughly the cautions on this page.
Failure to heed the following precautions may result in
damage to the VCR, remote control or video cassette.
1. DO NOT place the VCR . . .
... in an environment prone to extreme temperatures or
humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are
generated.
... on a surface that is unstable or subject to vibration.
2. DO NOT block the VCR's ventilation openings.
3. DO NOT place heavy objects on the VCR or remote control.
4. DO NOT place anything which might spill on top of the
VCR or remote control.
5. AVOID violent shocks to the VCR during transport.
**MOISTURE CONDENSATION
Moisture in the air will condense on the VCR when you move it
from a cold place to a warm place, or under extremely humid
conditions—just as water droplets form on the surface of a glass
filled with cold liquid. Moisture condensation on the head drum
will cause damage to the tape. In conditions where condensa-
tion may occur, keep the VCR's power turned on for a few
hours to let the moisture dry before inserting a tape.
**ABOUT HEAD CLEANING
Accumulation of dirt and other particles on the video heads
may cause the playback picture to become blurred or inter-
rupted. Be sure to contact your nearest JVC dealer if such
troubles occur.
Advertisement
Table of Contents
Related Manuals for JVC HR-J3005UM
Summary of Contents for JVC HR-J3005UM
- Page 1 Dear Customer, Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions contained on this page to ensure safe use of your new VCR. CAUTIONS HOW TO USE THIS INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
CONTENTS NSTALLING YOUR NEW VCR DITING Edit To Another VCR ........29 Basic Connections ........4 Edit From A Camcorder Or Another VCR ..30 NITIAL SETTINGS UESTIONS AND ANSWERS Plug & Play ..........6 Playback ............ 31 Language ............. 8 Recording ........... -
Page 3: Basic Connections
INSTALLING YOUR NEW VCR Basic Connections ANT. IN (Antenna or Cable input) Antenna or Cable Coaxial Cable Flat Feeder Matching Transformer (not supplied) AC Power Cord ANT. IN AUDIO RF OUT VIDEO CH3 CH4 Back of VCR RF OUT AC Outlet RF Cable (supplied) Audio/Video Cable (not supplied) - Page 4 NOTES: CHECK CONTENTS ● The VCR channel is the channel on the TV which will display Make sure the package contains all of the accessories the audio and video signals from the VCR. The VCR's CH3- listed in “SPECIFICATIONS” ( pg.
-
Page 5: Plug & Play
INITIAL SETTINGS The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR. The For Customers in the U.S.A.*: antenna cable must be connected for the Plug & Play function. Plug & Play The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast channels. - Page 6 INFORMATION ● If "AUTO CLOCK" is set to "ON" at the Clock Set screen on page 10, the clock will be adjusted automatically by the host channel every hour on the hour (except for 11:00 PM, midnight, 1:00 AM and 2:00 AM) by the incoming PBS channel clock setting data.
-
Page 7: Language
INITIAL SETTINGS (cont.) This VCR offers you the choice to view on-screen messages in Language English, Spanish or French (not including messages superimposed on the TV picture). Select the desired language using this procedure. The default setting is "ENGLISH". ACCESS MAIN MENU ●... -
Page 8: Clock
If you are using this VCR in a location other than in the U.S.A.: After you finish step 4, go to step 5 of "Manual" on page 11. Clock If you are using this VCR in the U.S.A.: Perform clock setting only if the clock has not been set correctly by the Plug &... -
Page 9: Semi-Auto (In The U.s.a. Only)
INITIAL SETTINGS (cont.) Semi-Auto (In the U.S.A. only) You can change the Host Channel/D.S.T. /Time Zone setting manually. SET AUTO CLOCK TO ON At the Clock Set screen, CLOCK SET press OK or PUSH JOG to move the highlight bar TIME DATE YEAR 1:00PM... -
Page 10: Manual
Manual SELECT TIME ZONE SET TIME You can select the time zone automatically or manually. Move the highlight bar to "TIME ZONE" by pressing OK or PUSH JOG , then press CH 5 ∞ or PUSH JOG% fi Press CH 5 ∞ or PUSH CLOCK SET to select "AUTO"... -
Page 11: Tuner
INITIAL SETTINGS (cont.) Set Receivable Channels Tuner TURN ON THE VCR Press POWER. Turn on the TV and select the VCR channel 3 or 4 (or AV mode). ACCESS MAIN MENU SCREEN Press MENU. ACCESS TUNER SET SCREEN Move the highlight bar MAIN MENU (arrow) to "TUNER SET"... -
Page 12: Add Or Delete A Channel
Add Or Delete A Channel ACCESS MAIN MENU SCREEN Press MENU. ACCESS TUNER SET SCREEN Move the highlight bar (arrow) to "TUNER SET" by pressing CH5 ∞ or PUSH JOG% fi , then press OK or PUSH JOG ACCESS MANUAL CHANNEL SET SCREEN Move the highlight bar TUNER SET... -
Page 13: Imple Playback And Recording
SIMPLE PLAYBACK AND RECORDING LOAD A CASSETTE Simple Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’t apply too much Playback pressure when inserting. -
Page 14: Simple Recording
LOAD A CASSETTE Simple Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. Recording SELECT RECORDING CHANNEL Press CH5 ∞ . Or press the appropriate NUMBER keys, Turn on the TV and select the VCR channel 3 or 4 (or AV then press ENTER. -
Page 15: Features
PLAYBACK AND RECORDING FEATURES Still Picture/Frame-By- Playback Frame Playback PAUSE DURING PLAYBACK Features Press PAUSE. If there is vertical jitter, use the CH 5 or ∞ button to correct the picture. ACTIVATE FRAME-BY- FRAME PLAYBACK Press PAUSE repeatedly to advance one frame at a time. Press PUSH JOG £... -
Page 16: High-Speed Search
Index Search Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function. START SEARCH While the tape is stopped, press PUSH JOG ™ or £... -
Page 17: Video Stabilizer
PLAYBACK AND RECORDING FEATURES (cont.) Video Stabilizer By activating the Video Stabilizer you can correct vertical vibrations in the picture when playing back unstable EP recordings that were made on another VCR. When this function is set to "ON", vertical vibration will be automatically corrected. *The default setting is "OFF". -
Page 18: Repeat Playback
Repeat Playback START REPEAT Press and hold PLAY (until " " blinks on the front display panel) during playback, then release. ● The entire tape is played back 50 times. STOP REPEAT To stop, press STOP at any time. NOTE: Pressing PLAY, REW, FF, PAUSE or PUSH JOG ™... -
Page 19: Superimpose
PLAYBACK AND RECORDING FEATURES (cont.) Superimpose This function, switchable between ON and OFF, determines whether or not operational indicators will appear on screen. ACCESS MAIN MENU SCREEN Press MENU. ACCESS FUNCTION SET SCREEN Move the highlight bar (arrow) to "FUNCTION SET" by pressing CH 5 ∞... -
Page 20: Recording Features
Record One Program While Recording Watching Another ENGAGE TV MODE Features During recording... ● Press TV/VCR. The VCR's VCR indicator goes out. (If you are using the RF connection ( pg. 4) to view the output from your VCR, the TV broadcast being recorded disappears.) ●... -
Page 21: Active Video Calibration
PLAYBACK AND RECORDING FEATURES (cont.) Active Video Calibration checks the condition of the tape during recording and playback, and compensates for poor Active Video reproduction to provide the best quality recording and playback pictures. *The default setting is "ON". Calibration Preparation TURN ON THE VCR Press POWER. -
Page 22: Recording
Recording Perform steps 1 – 3 on page 15 ("Simple Recording") before continuing. START RECORDING DURING CALIBRATION Press and hold REC and press PLAY on the remote control, or press REC on the VCR's front panel. ● The VCR takes about 7 seconds to assess the START quality of the tape in... -
Page 23: Imer Recording
TIMER RECORDING You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be Express Timer set before you can program the timer ( pg. 6 or 9). LOAD A CASSETTE Programming Make sure the record safety tab is intact. - Page 24 SET TAPE SPEED Press SP/EP to set the tape speed. RETURN TO NORMAL SCREEN Press PROG. or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. ENGAGE TIMER MODE NUMBER "9" SP/EP Press TIMER. The VCR turns off automatically and "‰" TIMER is displayed on the display panel.
-
Page 25: Check, Cancel And Revise Programs
TIMER RECORDING (cont.) Check, Cancel And Revise Programs DISENGAGE TIMER Press TIMER, then press POWER. ACCESS PROGRAM CHECK SCREEN Press PROG. CHECK. PR START STOP DATE 8:00P 10:00 12 12/24 2 10:00A 10:45 40 12/25 3 11:30P 01:00 125 12/25 PRESS (CHECK) TO NEXT POWER ACCESS PROGRAM... -
Page 26: Auto Sp→Ep Timer
Auto SP → EP Timer Auto Timer If, when recording in SP mode, there is not enough tape to record When the Auto Timer is set to ON the timer is automatically the entire program, the VCR automatically switches to EP mode engaged when the VCR's power is turned off. -
Page 27: Instant Timer Recording (Itr)
TIMER RECORDING (cont.) This easy method lets you record from 30 minutes to 6 hours (selectable in 30-min. increments) and shuts the VCR off after Instant Timer recording is finished. START RECORDING Recording Press REC on the front panel. (ITR) ENGAGE ITR MODE Press REC again. -
Page 28: Diting
EDITING You can use your VCR as the player and another VCR as the recorder. Edit To MAKE CONNECTIONS Another VCR Connect an AV cable between your VCR's VIDEO OUT and AUDIO OUT connectors and another VCR’s VIDEO IN and AUDIO IN connectors. ●... -
Page 29: Edit From A Camcorder Or Another Vcr
EDITING (cont.) You can use a camcorder or another VCR as the player and your VCR as the recorder. Edit From A MAKE CONNECTIONS Camcorder Or Connect an AV cable between the camcorder’s or the playback VCR's VIDEO OUT and AUDIO OUT connectors and your VCR’s VIDEO IN and AUDIO IN connectors. -
Page 30: Playback
QUESTIONS AND ANSWERS PLAYBACK RECORDING Q. What happens if the end of the tape is reached Q. When I pause and then resume a recording, the end during playback or search? of the recording before the pause is overlapped by A. -
Page 31: Roubleshooting
● This is normal. 3. The playback picture is blurred or ● The video heads may be dirty. The heads must be cleaned. Consult interrupted, even though TV your JVC dealer. broadcasts are clear. RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. -
Page 32: Timer Recording
TIMER RECORDING POSSIBLE CAUSE CORRECTIVE ACTION SYMPTOM ● The clock and/or the timer have Set the clock and/or timer correctly. 1. Timer recording won’t work. been set incorrectly. ● The timer is not engaged. Press TIMER and check to make sure that ‰... -
Page 33: Front View
INDEX FRONT VIEW 3 4 5 PLAY POWER MENU VIDEO AUDIO STOP/EJECT PAUSE 8 Front Display Panel ( pg. 35) 1 Power Button ( pg. 8) 9 Remote Control Sensor 2 Cassette Loading Slot 0 Channel [CH] 5 ∞ Button ( pg. -
Page 34: Rear View
REAR VIEW ANT. IN AUDIO RF OUT VIDEO CH3 CH4 1 Power Cord ( pg. 4) 4 VIDEO/AUDIO Output Connectors ( pg. 29) 2 ANT. IN Connector ( pg. 4) 5 RF OUT Connector ( pg. 4) 3 Channel 3/4 Switch ( pg. -
Page 35: Remote Control
POWER, TV/VCR, TV CH +/–. TV VOL +/– can be used without holding down TV. NOTES: ● Depending on the type of JVC TV, there may be cases where some or all functions cannot be operated using the remote control. - Page 36 SPECIFICATIONS GENERAL TIMER Power requirement : AC 120 V` , 60 Hz Clock reference : Quartz Power consumption Program capacity : 1-year programmable timer/ Power on : 20 W 8 programs Power off : 3 W Memory backup time : Approx. 10 min. Temperature Operating : 5°C to 40°C (41°F to 104°F)
- Page 37 MEMO Downloaded from: https://www.usersmanualguide.com/...
- Page 38 MEMO Downloaded from: https://www.usersmanualguide.com/...
- Page 39 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...