Advertisement
Quick Links
An authorized service technician is recommended to install the ice maker kit.
WARNING
• To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator
from electrical power before connecting a water supply line to the refrigerator.
• Connect the ice maker to a potable water supply only.
NOTE
Check with your local building authority for recommendations on water lines and associated materials prior to
installing your new refrigerator. For household water line hookup from the home water supply system to the unit,
Frigidaire recommends for homes with existing valves its Smart Choice
Stainless Steel Water Line) and for homes without an existing valve, Frigidaire recommends its Smart Choice
water line kit 5304493869 (with a 6� Polyline Waterline). Please refer to Frigidaire.com for more information.
• Flat head screw driver
• ¼" Hex driver
• Drill
Parts needed for install inside the unit
5304525288
Shoulder Screw
QTY: 5
Parts needed for install on back side of the unit
218515401
Hose and
Harness Clip
(30" only)
QTY: 3
AUTOMATIC ICE MAKER
INSTALLATION INSTRUCTIONS
Ice Maker (IM117000) Kit Components
5304520536
5304520538/5304520539
Ice Maker
QTY: 1
241500304
#8 screw
QTY: 2
5304455846
Clamp ¼"
QTY: 1
Tools Needed:
• Phillips or Quadrex driver
• Gloves
• Needle nose pliers
Cover with Door
QTY: 1
5304520540
Water Valve
QTY: 1
5303001193
Clamp ½"
QTY: 1
water line kit 5304437642 (with a 6�
®
5304520535
Ice Bin
Bracket (30" only)
QTY: 1
218976923
®
5304520537
QTY: 1
Tube
QTY: 1
P/N: A13109106
Advertisement
Related Manuals for Frigidaire FFTR2045VS
Summary of Contents for Frigidaire FFTR2045VS
- Page 1 5304437642 (with a 6� ® Stainless Steel Water Line) and for homes without an existing valve, Frigidaire recommends its Smart Choice ® water line kit 5304493869 (with a 6� Polyline Waterline). Please refer to Frigidaire.com for more information.
- Page 2 Ice Maker Installation Instructions 1. Unplug refrigerator from electrical outlet. 2. Lift the freezer shelf up and out. Set aside. See Figure 1. Locking Feature Figure 1 30" wide refrigerator 3. Remove water inlet and electrical cover, located Use the bracket with the ice maker on the inside of the unit, by inserting a flathead screwdriver on left side of opening in the small cover.
- Page 3 Ice Maker Installation Instructions 8. Install the plastic shutter into the window in the 11. Install the water line by screwing the nut on the front of the cover. The shutter snaps into the clips end of the tube onto the water inlet. Tighten the on inside face of the cover, no tools are required.
- Page 4 Ice Maker Installation Instructions (with access cover) 16. Plug the connector on the water valve wire har- ness into the connector above the condenser coil. You will hear a click when it is fully seated in place. Install the water valve clip at the bottom right side of the unit, and route and attach the water valve harness into the clip.
- Page 5 Ice Maker Installation Instructions (without access cover) 21. Connect the valve wire harness with the white connector from the unit. Insert the wiring in the box as shown. Close the box cover completely, ensuring all wiring is inside. See Figure 17. 19.
-
Page 6: Connecting Ice Maker To Water Supply
• Chemicals from a malfunctioning softener can (with a 6' Stainless Steel Water Line) and for homes damage the ice maker. If the ice maker is con- without an existing valve, Frigidaire recommends its nected to soft water, ensure that the softener is Smart Choice water line kit 5304493869 (with a 6' ®... - Page 7 Connecting Ice Maker to Water Supply To Connect Water Supply Line To Ice Maker Inlet Valve If you use braided flexible stainless steel tubing, the nut is already assembled on the tubing. Slide 1. Disconnect refrigerator from an electrical the nut onto the valve inlet and finger tighten the power source.
-
Page 8: Ice Service
Ice Service If your refrigerator has an automatic ice maker, mini- IMPORTANT mal ice will be produced during the first 24 hours of To ensure proper function for your ice maker, hook operation. Air in new plumbing lines may cause the up water supply immediately or turn ice maker OFF.