Page 1
All the rights to this manual are reserved, especially reproduction, publication and translation rights. No portion of this manual may be reproduced by no means (photocopy, microfilm or other methods) without previous written authorization from ECLERIS. Neither can it be reproduced, multiplied or published through any electronic data processing form.
USER MANUAL – EVERLUX TABLE OF CONTENT SYMBOLS ..........................3 SAFETY INFORMATION ......................3 WARNINGS .......................... 3 DESCRIPTION......................... 4 INTENDED USE ........................4 INTENDED USER ........................ 5 FEATURES AND DESCRIPTION ..................5 3.3.1 FRONT PANEL ......................5 3.3.2 REAR PANEL ........................ 5 COMPONENTS ........................
Should you have any doubt regarding the contents of the manual herein or the equipment operation and safety, please contact your local distributor or the closest ECLERIS office. ECLERIS will not assume any liability for damages that may occur if the device is used without following the instructions and/or ignoring the following advice: ...
3. DESCRIPTION 3.1 INTENDED USE Everlux light source has been designed to be used in all Ecleris microscope and colposcope models as well as in therapeutic and diagnostic procedures. The cold and white light of this equipment enhances the real brightness and colors allowin its use for all types of procedures.
The device has been designed to be used only for medical, paramedical or health professionals. 3.3 FEATURES AND DESCRIPTION EVERLUX light source, based on the LED technology, has been designed to be used in all ECLERIS microscope and colposcope models as well as in many medical applications.
Thoroughly follow the instructions included in this section. 1) Unpack the equipment carefully. 2) In case of using the EVERLUX as an endoscopic light source, place it on a solid and flat surface. 3) Rotate the universal adapter until the corresponding connector is aligned with the light output.
The EVERLUX light source has an over-temperature protection. LED system will turn off if it reaches a risky operation temperature. 5) Once the procedure is over, turn the EVERLUX off in order to maximize the LED system lifetime and energy saving.
Oxide corrosion in connection pins. 6.3 FUSE CHANGE To avoid time losses due to downtime of the EVERLUX, it is recommended to have spare fuses. 1) Disconnect the power supply cable from the electrical network and the equipment. 2) Under the power supply cable connector there is a small rectangular plastic holder where the fuses are located.
USER MANUAL – EVERLUX 7. TECHNICAL SPECIFICATIONS POWER SUPPLY VOLTAGE 100 -240V Nº OF PHASES 1 (single phase) 50 – 60 Hz FREQUENCY PROTECTION AGAINST ELECTRICAL SHOCK Class I APPLIED PART PROTECTION LEVEL AGAINST WATER IPX0 ENTRANCE CONSUMPTION 110VA FUNCTION MODE...
Page 10
Check monitor color, brightness and saturation levels after having made white balance. If the problem cannot be solved, please contact your local distributor or the closest ECLERIS office and request technical service. Page 10 de 11 INMANUUIN167 Rev.2019.04.01 / ENG...
The warranty period is for one (1) year as from the date of purchase invoice. ECLERIS shall not be liable for any damage caused to/by the EVERLUX due to incorrect use, negligence, cleaning or incorrect storage. Any repairs made by personnel not authorized by ECLERIS will void this warranty.