22 | English
Other units used on the same receptacle will cause un-
u
even voltage that could lead to the magnet releasing.
Always use the power tool alone on the receptacle.
Avoid operating annular cutters without coolant fluid.
u
Always check coolant level before operating.
Protect the motor. Never allow coolant fluid, water, or
u
other contaminants enter the motor.
Metal chips are often very sharp and hot. Never touch
u
them with bare hands. Clean up with a magnetic chip
collector and a chip hook or other appropriate tool.
Never attempt to use the power tool with incorrect
u
current or abnormally low voltage. Check the name-
plate of the power tool to ensure that correct voltage and
frequency are used.
The power tool is delivered with a laser warning sign
u
(see table: "Symbols and their meaning").
Never make warning signs on the machine unrecognis-
u
able.
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself. You could
blind somebody, cause accidents or damage
your eyes.
If laser radiation hits your eye, you must close your
u
eyes and immediately turn your head away from the
beam.
Do not make any modifications to the laser equip-
u
ment.
Do not let children use the power tool unsupervised.
u
They could unintentionally blind themselves or other per-
sons
If the text of the laser warning label is not in your na-
u
tional language, stick the provided warning label in
your national language over it before operating for the
first time.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meanings
WARNING! Do not direct the
laser beam at persons or an-
imals and do not look directly
into the laser beam or at its
reflection.
Wear safety goggles.
1 609 92A 4S6 | (10.08.2021)
Symbols and their meanings
Wear hearing protection.
Exposure to noise can cause
hearing loss.
WARNING! Ensure that the
safety strap is working prop-
erly before you use it. Never
use a safety strap if it is dam-
aged. Instead, replace it im-
mediately.
WARNING! The tool must
not be operated outside in
wet weather.
WARNING! If the beam of
the overload indicator lights
up close to this symbol, the
workload is very high. Re-
duce the workload or switch
the motor off, otherwise the
overload protection will be
activated and the motor will
be shut off automatically.
If the beam of the overload
indicator lights up close to
this symbol, the workload is
optimal and there is no
chance of an overload.
WARNING! Do not hold your
hand underneath the applic-
ation tool or the accessories
when you are changing
these.
WARNING! Before drilling,
ensure that the magnet
strength is sufficient. The
surface of the workpiece
must be level, clean and suf-
ficiently thick.
WARNING! When drilling
into vertical or diagonal sur-
faces or overhead, the power
tool must be secured with
the safety strap.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Bosch Power Tools