IP4927_39Y45CP_00_140417:IP3020_38X03CP_11_100514.qxd 2014-4-17 10:37 Page 13
starting to use
1.
Display Window
setting the clock
1.
2.
3.
notes:
1. To reset the clock, repeat step 1-3.
2. The clock will retain the time of day as
long as the oven is plugged in and
electricity is supplied.
3. Clock is a 12-hour display.
4. Oven will not operate while colon is
flashing.
note:
The maximum programmable time using Time Dial is up to 90 minutes.
your oven
• Plug into a properly
grounded electrical
outlet.
The oven automatical-
ly defaults to the impe-
rial measure system
(oz/lb).
• Press clock once.
Colon flashes.
• Set time of day using
Time Dial.
Time appears in
the display window;
colon continues
flashing.
• Press clock once.
Colon stops flash-
ing; time of day is
entered.
dial features
TIME CHOICE
Rotate the dial clockwise to increase the cooking time and rotate
the dial counter-clockwise to decrease the cooking time.
WEIGHT CHOICE
Rotate the dial clockwise to increase the weight and rotate the dial
counter-clockwise to decrease the weight setting.
SENSOR MENU CHOICE
Dial can be rotated in either direction to select the Sensor Menus.
child safety lock
This feature prevents the electronic oper-
ation of the oven until cancelled. It does
not lock the door.
to set:
to cancel:
NOTES:
1. You can set the Child Lock feature when
the display shows a colon or time of day.
2. To set or cancel child safety lock, Start or
Stop/Reset must be pressed 3 times
within 10 seconds.
13
• Press start 3 times.
"
"
The symbol
appears in the display
window.
"
"
The symbol
continues to be
displayed until Child
Safety Lock is can-
celled. Any button
may be pressed but
the microwave will
not start.
• Press stop/reset 3
times.
The display will
return to colon or
time of day when
Child Safety Lock
has been cancelled.