Table of Contents
Advertisement
Locating parts on the system board
Figure 4 shows the locations of the parts on the system board.
Figure 4. System board part locations
Oxide Semiconductor) /Recovery jumper
Locating internal drives
Internal drives are devices that your computer uses to read and store data. You can
add drives to your computer to increase storage capacity and enable your
computer to read other types of media. Internal drives are installed in bays. In this
manual, the bays are referred to as bay 1, bay 2, and so on.
When installing or replacing an internal drive, it is important to note the type and
size of the drive that you can install or replace in each bay and correctly connect
the cables to the drive installed. Refer to the appropriate section in Chapter 2,
"Installing or replacing hardware," on page 15 for instructions on how to install or
replace internal drives for your computer.
12
User Guide
1 Microprocessor
2 Microprocessor fan connector
3 Memory slots (2)
4 Thermal sensor connector
5 24-pin power connector
6 Battery
7 Clear CMOS (Complementary Metal
8 SATA connectors (4)
9 Front panel connector
10 Front USB connector
11 Cover presence switch connector
(also called intrusion switch connector)
12 Front USB connector
13 Serial (COM 2) connector
14 PCI card slot
15 Power fan connector
16 Internal speaker connector
17 Front audio connector
18 PCI Express x1 card slots (2)
19 PCI Express x16 graphics card slot
20 System fan connector
21 4-pin power connector
Advertisement
Table of Contents
