hit counter script
Sony CFD-S350 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. CD Player
  5. S350 - CFD Boombox
  6. Service manual

Sony CFD-S350 Service Manual

Hide thumbs Also See for CFD-S350:
Table of Contents

Advertisement

Quick Links

Download this manual
CFD-S350/S350L
SERVICE MANUAL
Ver. 1.9 2007.09
AUDIO POWER SPECIFICATIONS (US Model)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 3.2-ohm loads, both channels driven
from 150 - 10,000 Hz; rated 1.8 W per
channel-minimum RMS power, with no
more than 10 % total harmonic distortion
in AC operation.
Other Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance
of about 200 mm from the objective lens surface
on the optical pick-up block with 7 mm
aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm)
(CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Sony Corporation
9-879-435-10
2007I04-1
Personal Audio Division
© 2007.09
Published by Sony Techno Create Corporation
Model Name Using Similar Mechanism CFD-S250
CD
CD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism NEW
TC
Section Tape Transport Mechanism Type
SPECIFICATIONS
Radio section
Frequency range
CFD-S350
FM
87.5 - 108 MHz
AM
US, CND, E92, MX model:
530 - 1,710 kHz
TW model:
531 - 1,611 kHz
other models:
530 - 1,611 kHz (9 kHz step)
530 - 1,610 kHz (10 kHz step)
CFD-S350L
FM
87.5 - 108 MHz
MW
531 - 1,611 kHz (9 kHz step)
530 - 1,610 kHz (10 kHz step)
LW
153 - 279 kHz
IF
FM: 10.7 MHz
AM/MW/LW: 450 kHz
Aerials
FM: Telescopic aerials
AM/MW/LW: Built-in ferrite bar aerials
CD RADIO CASSETTE-CORDER
US Model
Canadian Model
E Model
Australian Model
CFD-S350
AEP Model
UK Model
CFD-S350L
KSM-213CDP
KSS-213C
MF-S350//C
MF-S200//C
MF-S200//C1
MF-S350V//C
– Continued on next page –
1

Advertisement

Table of Contents
loading

Related Manuals for Sony CFD-S350

Summary of Contents for Sony CFD-S350

  • Page 1 Number of channels – Continued on next page – Frequency response 20 - 20,000 Hz +1/–2 dB Wow and flutter CD RADIO CASSETTE-CORDER Below measurable limit Sony Corporation 9-879-435-10 2007I04-1 Personal Audio Division © 2007.09 Published by Sony Techno Create Corporation...
  • Page 2 Use of controls or adjustments or performance of proce- 4-track 2 channel stereo Fast winding time dures other than those specified herein may result in haz- Approx. 120 s (sec.) with Sony cassette C-60 ardous radiation exposure. Frequency response TYPE I (normal): 80 - 10,000 Hz...

  • Page 3: Table Of Contents

    CD Section ................17 6. DIAGRAMS 6-1. Block Diagram – CD Section – ......... 19 6-2. Block Diagram – Tuner Section (CFD-S350 Model) – ..20 6-3. Block Diagram – Tuner Section (CFD-S350L Model) – .. 21 0.15 µ F 1.5 k Ω...

  • Page 4: Servicing Notes

    LASER DIODE AND FOCUS SEARCH OPERATION CHUCK PLATE JIG ON REPAIRING CHECK 1. Turn ON the [POWER] (CFD-S350) or [OPERATE] (CFD-S350L) On repairing CD section, playing a disc without the lid (CD), use button and press [CD] button to CD position.

  • Page 5: General

    CFD-S350/S350L SECTION 2 GENERAL This section is extracted from instruction manual. Location of controls Remote Control Inserting a cassette Loading a CD With the side you want SLEEP to play facing you OPERATE FUNCTION (POWER) Number buttons With the labeled side up...

  • Page 6: Disassembly

    CFD-S350/S350L SECTION 3 DISASSEMBLY • The equipment can be removed using the following procedure. 3-1. CABINET TOP ASSY (Page 7) 3-2. CABINET FRONT ASSY, 3-9. CD LID 3-10. LCD BLOCK ASSY CABINET BOTTOM ASSY (Page 11) (Page 11) (Page 7) 3-11.

  • Page 7: Cabinet Top Assy

    CFD-S350/S350L Note : Follow the disassembly procedure in the numerical order given. 3-1. CABINET TOP ASSY 4 two screws 6 three screws (+BV (B2.6 ) ) 3 CD lid (+BV (B2.6 ) ) 7 two screws (+BV (B2.6 ) )

  • Page 8: Wires

    CFD-S350/S350L 3-3. WIRES Put flat cable and wires between the cabinets and push them in the grooves located at A to G in the figure to prevent disconnection before assembling the set. from H/P board cabinet front cabinet bottom 3-4. MD BLOCK 1 two screws (+P (B2.6 ) )

  • Page 9: Holder (Cassette) Sub Assy

    CFD-S350/S350L 3-5. HOLDER (CASSETTE) SUB ASSY 1 screw (+BV (B2.6 ) ) 2 damper two claws 4 cassette spring two claws 3 holder (cassete) sub assy 3-6. POWER KEY BOARD 1 three screws 5 power button 3 three screws 4 POWER KEY board...

  • Page 10: Main Board

    CFD-S350/S350L 3-7. MAIN BOARD 5 two screws (+BV (B2.6 ) ) 3 CNP322 (4P) 6 MAIN board 4 H/P board 2 CNP304 (4P) 1 CNP805 (11 core) 3-8. TUNER BOARD, POWER BOARD 2 telescopic antenna 1 screw (+P (M3 ) ) 7 two screws (+BV (B2.6 ) )

  • Page 11: Cd Lid

    CFD-S350/S350L 3-9. CD LID 3 CD lid 2 two claws 1 two claws CD spring 3-10. LCD BLOCK ASSY 8 CNP407 (4P) qa mode button 0 screw 5 two screws qs LCD block assy 6 screw 2 CD KEY HOLD (2) board...

  • Page 12: Cd Block Assy

    CFD-S350/S350L 3-11. CD BLOCK ASSY two claws 3 CD cover two claws 4 CD block assy 1 two screws 2 two screws (+PWH (B2.6 ) ) (+PWH (B2.6 ) ) 3-12. OPTICAL PICK-UP 5 optical pick-up 1 gear (A) claw...

  • Page 13: R/P Head (Hrp301), Erase Head (He301), Tc Board

    CFD-S350/S350L 3-13. R/P HEAD (HRP301), ERASE HEAD (HE301), TC BOARD 6 Remove the four solderings. 3 screw two claws (+BVTT 2 x 4) 4 lug 7 TC board 1 R/P head (HRP301) 2 erase head (HE301) 3-14. MOTOR ASSY (M801), RF BELT 1 screw (+P (B2.6 ) )

  • Page 14: Mechanical Adjustments

    CFD-S350/S350L SECTION 4 SECTION 5 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS PRECAUTION TAPE SECTION 0 dB = 0.775 V 1. Clean the following parts with a denatured-alcohol-moistened swab : • Standard Output Level record/playback head pinch roller Output terminal HP OUT erase head...

  • Page 15: Tuner Section

    Adjust for a maximum reading on level meter [AM] 450 kHz Setting: Function: RADIO AM FREQUENCY COVERAGE ADJUSTMENT (CFD-S350) Band: AM or MW or LW Adjustment Part Frequency Display Reading on Digital Voltmeter MAIN board 531 kHz 1.0 ± 0.05 V...
  • Page 16 CFD-S350/S350L Adjustment and Connecting Location: AM TRACKING ADJ L3-2 LW TRACKING ADJ L3-1 MW TRACKING ADJ – TUNER BOARD (Component Side) – FM FREQUENCY COVERAGE TP-ANT (JW2) FM TRACKNG AM IF LW TRACKING FM IF FM FREQUENCY AM/MW FREQUENCY COVERAGE...

  • Page 17: Cd Section

    CFD-S350/S350L CD SECTION CD section adjustments are done automatically in this set. In case of operation check, confirm that focus bias. FOCUS BIAS CHECK Test Point: 1. Connect the oscilloscope between IC701 pin 4 and pin qa (or – CD board (conductor side) –...
  • Page 18 CFD-S350/S350L MEMO...

  • Page 19: Diagrams

    CFD-S350/S350L SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM — CD SECTION — LCHO CD_IN_ L INTERPOLATION SLICE ERROR MUTE DIGITAL FIN2 EFMIN (Page 22) LEVEL CORRECTION & FILTER CONTROL AUDIO CD ATTENUATION & RCHO CD_IN_R DEEMPHASIS 1-bit DAC PH/BH DOUT FIN1...

  • Page 20: Block Diagram - Tuner Section (Cfd-S350 Model)

    CFD-S350/S350L 6-2. BLOCK DIAGRAM — TUNER SECTION (CFD-S350 MODEL) — FM IFT FM/AM FRONT-END, FM IF IF AMP, DET, MPX ANT1 FM TELESCOPIC ANTENNA L-OUT TU-LOUT IF-IN RF-IN MIX-OUT FM IF -OUT RF AMP MUTE (Page 22) BUFFER R-OUT R-CH...

  • Page 21: Block Diagram - Tuner Section (Cfd-S350L Model)

    CFD-S350/S350L 6-3. BLOCK DIAGRAM — TUNER SECTION (CFD-S350L MODEL) — FM IFT FM IF FM/MW/LW FRONT-END,IF AMP,DET,MPX ANT1 FM TELESCOPIC ANTENNA L-OUT TU-LOUT RF-IN MIX-OUT IF-IN FM IF -OUT RF AMP MUTE (Page 22) BUFFER R-OUT R-CH RF-OUT FM RF...

  • Page 22: Block Diagram - Main Section

    CFD-S350/S350L 6-4. BLOCK DIAGRAM — MAIN SECTION — (CFD-S350) (CFD-S350L) IC302 R.RO ELECTRONIC VOLUME R.IN R.LINE POWER AMP REC/PB CD_IN_R IC304 PRE AMP R-CH (Page 19) L.RO IC301 VOL AMP J321 ALC 2 L-OUT L.LINE LINE AMP L-IN L.LO CD_IN_L...

  • Page 23: Circuit Boards Location

    CFD-S350/S350L Ver. 1.1 • NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 6-5. CIRCUIT BOARDS LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is H/P board POWER board printed in each block.)

  • Page 24: Printed Wiring Board - Cd Section

    CFD-S350/S350L 6-6. PRINTED WIRING BOARD — CD SECTION — • Refer to page 23 for Circuit Boards Location. : Uses unleaded solder. (Page 32) CFD-S350/S350L...

  • Page 25: Schematic Diagram - Cd Section

    CFD-S350/S350L 6-7. SCHEMATIC DIAGRAM — CD SECTION — • Refer to page 23 for Waveforms. • Refer to page 39 for IC Block Diagrams. C727 C726 C724 C725 C721 R717 C730 C720 R716 R728 R727 C722 R718 C723 R721 (Page 31)

  • Page 26: Printed Wiring Board - Tuner Section (Cfd-S350 Model)

    CFD-S350/S350L Ver. 1.1 6-8. PRINTED WIRING BOARD — TUNER SECTION (CFD-S350 MODEL) — • Refer to page 23 for Circuit Boards Location. : Uses unleaded solder. US,CND,E92,MX MODEL AUS,KR,SP,TH,TW (CV) MODEL MAIN BOARD CNP805 (Page 32) US,CND,E92,MX MODEL (GND) AUS,KR,SP,TH,TW MODEL 1-863-438- •...

  • Page 27: Schematic Diagram - Tuner Section (Cfd-S350 Model)

    CFD-S350/S350L Ver. 1.1 6-9. SCHEMATIC DIAGRAM — TUNER SECTION (CFD-S350 MODEL) — • Refer to page 23 for Waveforms. • Refer to page 40 for IC Block Diagrams. IC B/D JC12 JC11 US,CND, E92,MX AUS,KR,SP, MODEL TH,TW MODEL JC24 US,CND,E92,MX...

  • Page 28: Printed Wiring Board - Tuner Section (Cfd-S350L Model)

    CFD-S350/S350L 6-10. PRINTED WIRING BOARD — TUNER SECTION (CFD-S350L MODEL) — • Refer to page 23 for Circuit Boards Location. : Uses unleaded solder. (CV) MAIN BOARD CNP805 (Page 32) (GND) 1-863-438- • Semiconductor Location Ref. No. Location Ref. No.

  • Page 29: Schematic Diagram - Tuner Section (Cfd-S350L Model)

    CFD-S350/S350L 6-11. SCHEMATIC DIAGRAM — TUNER SECTION (CFD-S350L MODEL) — • Refer to page 23 for Waveforms. • Refer to page 40 for IC Block Diagrams. IC B/D JC22 JC24 CNP1 IC B/D ANT1 (Page 31) JC33 JC34 JC23 CFD-S350/S350L...

  • Page 30: Schematic Diagram - Main Section (1/2)

    CFD-S350/S350L 6-12. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 41 for IC Block Diagrams. D323 R245 R145 R133 C323 C114 C115 R323 R324 C324 R134 C129 C113 R131 R135 R136 R138 Q113 IC B/D IC304 Q122...

  • Page 31: Schematic Diagram - Main Section (2/2)

    R829 R820 R825 (Page 30) D804 R822 Q805 (US,CND,E92,MX) (SP,TH) (AUS,KR,TW) Q813 (US,CND,E92,MX) (SP,TH) (Page 25) (S350:AUS,KR,TW/S350L) C826 R857 C817 C816 R866 R865 R867 R868 C823 C163 R166 C262 C263 R266 C162 CNP805 (CFD-S350) (Page 27) (CFD-S350L) (Page 29) CFD-S350/S350L...

  • Page 32: Printed Wiring Boards - Main Section

    CFD-S350/S350L 6-14. PRINTED WIRING BOARDS — MAIN SECTION — • Refer to page 23 for Circuit Boards Location. : Uses unleaded solder. CD BOARD POWER BOARD CNP702 KH902 (Page 24) (Page 37) R146 1-865-637- J321 TUNER BOARD CNP1 (CFD-S350) (Page 26)

  • Page 33: Printed Wiring Board - Tc Section

    CFD-S350/S350L 6-15. PRINTED WIRING BOARD — TC SECTION — • Refer to page 23 for Circuit Boards Location. : Uses unleaded solder. CFD-S350 CFD-S350L T301 C308 T301 Q301 C307 C307 C310 C305 C305 R307 R307 R308 C304 C304 R308 R306...

  • Page 34: Schematic Diagram - Tc Section

    CFD-S350/S350L 6-16. SCHEMATIC DIAGRAM — TC SECTION — • Refer to page 23 for Waveforms. • Refer to page 41 for IC Block Diagrams. (CFD-S350) IC301 (CFD-S350L) IC B/D R103 R112 R301 C102 R102 C103 R104 R111 C301 C104 C101...

  • Page 35: Printed Wiring Boards - Control Section

    CFD-S350/S350L 6-17. PRINTED WIRING BOARDS — CONTROL SECTION — • Refer to page 23 for Circuit Boards Location. : Uses unleaded solder. (Page 32) (Page 32) MAIN BOARD MAIN BOARD CNP810 CNP806 S403 DISPLAY ENTER MEMORY MAIN BOARD CNP807 (Page 32)

  • Page 36: Schematic Diagram - Control Section

    CFD-S350/S350L 6-18. SCHEMATIC DIAGRAM — CONTROL SECTION — IC403 R423 R414 R415 R417 R418 R419 R431 R432 R422 R407 R408 S407 S408 S413 S414 S415 S416 S417 S418 R440 C401 (Page 31) S405 S410 S411 S412 R413 R424 R426 R428...

  • Page 37: Printed Wiring Boards - Power Supply Section

    CFD-S350/S350L 6-19. PRINTED WIRING BOARDS — POWER SUPPLY SECTION — • Refer to page 23 for Circuit Boards Location. : Uses unleaded solder. J901 CNP904 T901 D903 C903 D901 C906 C901 D902 JW905 C902 D904 C904 CNP901 KH902 1-865-640- 1-865-638-...

  • Page 38: Schematic Diagram - Power Supply Section

    CFD-S350/S350L Ver. 1.1 6-20. SCHEMATIC DIAGRAM — POWER SUPPLY SECTION — CNP904 CN904 CNP901 CN905 JW905 C901 D901 (S350:US,CND,E92,MX,TW) D902 (S350:AUS,KR,SP,TH/S350L) C902 C906 T901 KH902 C903 F902 D903 J901 D904 (Page 30) C904 CFD-S350/S350L...
  • Page 39 CFD-S350/S350L • IC Block Diagrams IC701 LC78646E-US-E (CD Board) 78 77 76 75 74 73 72 71 69 68 67 66 65 64 63 62 61 FIN1 – FIN2 – TIN1 TBAL – – TIN2 – – TBAL – RFMON...
  • Page 40 CFD-S350/S350L IC702 BA5826FP-E2 (CD Board) IC1 TA2149BN (TUNER Board) (CFD-S350) IC1 TA2149BN (TUNER Board) (CFD-S350L) SP– GND1 FM RF-OUT FM RF D.BUFF VCC1 SL– FM RF-IN AM RF-IN D.BUFF LEVEL D.BUFF AM LOW CUT SHIFT MIX OUT FM OSC D.BUFF...
  • Page 41 CFD-S350/S350L IC805 CAT24WC02WI-1.8-TE13 (MAIN Board (2/2)) 1K BIT EEPROM ARRAY 8BIT 7BIT SLAVE • WORD ADDRESS DATA ADDRESS 7BIT DECODER REGISTER REGISTER START STOP CONTROL CIRCUIT HIGH VOLTAGE POWER SUPPLY OCCURENCE CIRCUIT VOLTAGE DETECTION IC302 PT2257-S (MAIN Board (1/2)) L-IN...
  • Page 42 CFD-S350/S350L • IC Pin Description IC801 µPD789477GC-A44-8BT (SYSTEM CONTROL) (MAIN BOARD (2/2)) Pin No. Pin Name Pin Description 1, 2 — Not used. (Open) 3 to 5 VLC2 to 0 LCD drive bias voltage input 6 to 9 COM0 to 3...
  • Page 43 CFD-S350/S350L Pin No. Pin Name Pin Description Main system oscillation output (4.19 MHz) System reset input V-CLK Volume clock output V-DATA Volume data output EEPROM clock output EEPROM input/output...

  • Page 44: Exploded Views

    CFD-S350/S350L Ver. 1.8 SECTION 7 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Abbreviation The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. CND : Canadian model 0 are critical for safety.

  • Page 45: Cabinet (Front) Section

    2-547-134-11 BUTTON, POWER (for SILVER) (US) 3-252-827-01 SCREW (B2.6), (+) BV TAPPING 2-547-134-31 BUTTON, POWER (for BLUE) (US) 3-047-468-11 DAMPER 4-925-334-41 EMBLEM (5-A), SONY 2-547-135-01 BUTTON, PAUSE (for SILVER) 2-547-135-21 BUTTON, PAUSE (for BLUE) (EXCEPT US) SP301 1-825-690-11 SPEAKER (DIA. 10cm) (L-CH)

  • Page 46: Cabinet (Top) (1) Section

    CFD-S350/S350L Ver. 1.8 7-3. CABINET (TOP) (1) SECTION S801 KSM-213CDP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-923-736-01 COVER, CD 2-547-122-01 LID, CD (for SILVER) (S350L) 3-931-379-21 RUBBER, VIBRATION PROOF 2-547-122-11 LID, CD (for BLUE) (S350L) 3-252-828-01 SCREW (B2.6), (+) PWH TAPPING...

  • Page 47: Cabinet (Top) (2) Section

    CFD-S350/S350L Ver. 1.8 7-4. CABINET (TOP) (2) SECTION not supplied LCD401 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-547-131-01 BUTTON, CD (for SILVER) (US,CND,E92,MX) 2-547-143-01 PLATE, LIGHT GUIDE (S350L) 2-547-131-11 BUTTON, CD (for SILVER,BLUE)

  • Page 48: Cabinet (Bottom) Section

    CFD-S350/S350L Ver. 1.8 7-5. CABINET (BOTTOM) SECTION T901 not supplied F902 not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité.

  • Page 49: Tape Mechanism Section

    CFD-S350/S350L Ver. 1.5 7-6. TAPE MECHANISM SECTION (MF-S350//C) M801 not supplied not supplied not supplied not supplied HRP301 HE301 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-237-718-01 LEVER, REC A-1105-331-A MF-S350//C 3-254-022-01 SCREW 3-933-825-01 ARM ASSY, PINCH ROLLER 1-831-926-11 CABLE, FLEXIBLE FLAT (11 CORE) (S350) 3-254-151-01 SCREW (B2.6), (+) P TAPPING...

  • Page 50: Cd Mechanism Section

    CFD-S350/S350L 7-7. CD MECHANISM SECTION (KSM-213CDP) not supplied not supplied (M701 (SPINDLE)) M702 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité.

  • Page 51: Electrical Parts List

    CFD-S350/S350L Ver. 1.1 SECTION 8 BATT-1 BATT-2 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • SEMICONDUCTORS The components identified by mark 0 or dotted line with mark the parts list may be different from the In each case, u : µ, for example: 0 are critical for safety.
  • Page 52 CFD-S350/S350L CD KEY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R704 1-216-833-11 METAL CHIP 1/10W < RESISTOR > R705 1-216-833-11 METAL CHIP 1/10W R706 1-216-841-11 METAL CHIP 1/10W R406 1-216-825-11 METAL CHIP 2.2K 1/10W R707...
  • Page 53 CFD-S350/S350L Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1098-557-A LCD BOARD, COMPLETE (S350) C206 1-162-966-11 CERAMIC CHIP 0.0022uF 10% A-1098-595-A LCD BOARD, COMPLETE (S350L) C208 1-162-966-11 CERAMIC CHIP 0.0022uF 10% C209 1-126-947-11 ELECT...
  • Page 54 CFD-S350/S350L MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C825 1-126-964-11 ELECT 10uF < TRANSISTOR > C826 1-164-156-11 CERAMIC CHIP 0.1uF C830 1-162-974-11 CERAMIC CHIP 0.01uF Q113 8-729-905-40 TRANSISTOR 2SC4081T106 C832 1-162-974-11 CERAMIC CHIP 0.01uF...
  • Page 55 CFD-S350/S350L Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R325 1-216-821-11 METAL CHIP 1/10W R839 1-216-845-11 METAL CHIP 100K 1/10W R326 1-216-821-11 METAL CHIP 1/10W R840 1-216-845-11 METAL CHIP 100K 1/10W R327 1-216-821-11 METAL CHIP...
  • Page 56 CFD-S350/S350L Ver. 1.5 MAIN POWER POWER KEY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R895 1-216-813-11 METAL CHIP 1/10W < TRANSFORMER > R896 1-216-813-11 METAL CHIP 1/10W 0 T901 R899 1-216-825-11 METAL CHIP 2.2K 1/10W...
  • Page 57 CFD-S350/S350L Ver. 1.1 TUNER (S350) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > < SWITCH > CN303 1-568-830-11 CONNECTOR, FFC 11P (S350) S301 1-786-126-11 SWITCH, SLIDE (REC/PB) CN303 1-784-774-11 CONNECTOR, FFC 13P (S350L) <...
  • Page 58 CFD-S350/S350L Ver. 1.1 TUNER (S350) TUNER (S350L) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-162-927-11 CERAMIC CHIP 100PF 1-411-234-21 COIL, AM OSC 1-162-964-11 CERAMIC CHIP 0.001uF 1-414-142-11 INDUCTOR 1uH (S350:US,CND,E92,MX) 1-162-964-11 CERAMIC CHIP 0.001uF 1-410-509-11 INDUCTOR...
  • Page 59 CFD-S350/S350L TUNER (S350L) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-162-970-11 CERAMIC CHIP 0.01uF 1-162-964-11 CERAMIC CHIP 0.001uF 1-162-910-11 CERAMIC CHIP 0.25PF 50V 1-162-964-11 CERAMIC CHIP 0.001uF < FILTER > 1-162-915-11 CERAMIC CHIP 10PF 0.5PF...
  • Page 60 CFD-S350/S350L Ver. 1.8 TUNER (S350L) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-833-11 METAL CHIP 1/10W MISCELLANEOUS 1-216-833-11 METAL CHIP 1/10W *************** 1-216-853-11 METAL CHIP 470K 1/10W 1-216-845-11 METAL CHIP 100K 1/10W 1-962-805-11 CABLE, FLEXIBLE FLAT (16 CORE)
  • Page 61 CFD-S350/S350L US Model Canadian Model SERVICE MANUAL E Model Australian Model CFD-S350 Ver. 1.9 2007.09 AEP Model UK Model CFD-S350L SUPPLEMENT-1 File this supplement with the service manual. Subject: Change of tape mechanism This model is using four kinds of tape mechanisms.
  • Page 62 CFD-S350/S350L Ver. 1.9 IDENTIFICATION MF-S200//C MF-S200//C1 MF-S350V//C...
  • Page 63 CFD-S350/S350L Ver. 1.9 TAPE MECHANISM SECTION (MF-S200//C) not supplied M801 not supplied not supplied not supplied HRP301 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-237-718-01 LEVER REC 3-237-719-02 CHASSIS, TC 3-245-709-21 SCREW A-3013-956-A MF-S200//C 1-831-926-11 CABLE, FLEXIBLE FLAT (11 CORE) (S350)
  • Page 64 CFD-S350/S350L Ver. 1.9 TAPE MECHANISM SECTION (MF-S200//C1) M801 not supplied not supplied not supplied not supplied HRP301 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-237-718-01 LEVER REC 3-252-614-01 CHASSIS, TC 3-245-709-21 SCREW A-1159-075-A MF-S200//C1 1-831-926-11 CABLE, FLEXIBLE FLAT (11 CORE) (S350)
  • Page 65 CFD-S350/S350L Ver. 1.9 TAPE MECHANISM SECTION (MF-S350V//C) HRP301 HE301 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-237-718-01 LEVER, REC * 255 A-1115-411-A TC BOARD, COMPLETE (S350) 3-254-022-01 SCREW 3-252-614-01 CHASSIS, TC 1-831-926-11 CABLE, FLEXIBLE FLAT (11 CORE) (S350)
  • Page 66 CFD-S350/S350L REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2005.02 2005.03...

This manual is also suitable for:

Cfd-s350l

Table of Contents