Related Manuals for Panasonic SB-PC40P
Summary of Contents for Panasonic SB-PC40P
- Page 1 ORDER NO. MD0512472C7 Speaker System SB-PC40P Colour (S)... Silver Type SPECIFICATIONS Specification...
-
Page 2: Assembling And Disassembling
Front Speaker : SB-PF40P-S Surround Speaker : SB-PS40P-S Center Speaker : SB-PC40P-S Subwoofer : SB-W40P-S Type 1 way, 2 speakers (Bass-ref.) Music Center : SA-HT40EE-S Speaker unit Impedance 6 System : SC-HT40EE-S Full range 6.5 cm (2- 1 / 2 ”) Cone type x 2... -
Page 3: Disassembly Flow Chart
3. Select items from the following index when checks or replacement are required. 4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary. Below is the list of disassembly sections - Disassembly of Front Panel Assembly - Disassembly of Woofer 1 - Disassembly of Woofer 2... - Page 4 Step 1: Remove 6 screws from the Rear Cabinet Assembly. Step 2: Insert an Allen key into the top hole of the Front Panel Assembly as arrow shown. 1.3. Disassembly of Woofer 1 Follow (step 1) to (step 2) of Item 1.2.
- Page 5 Step 1: Detach the (+) yellow and (-) blue wires from the Woofer 1. Step 2: Remove 4 screws from the Woofer 1. 1.4. Disassembly of Woofer 2 Follow (step 1) to (step 2) of Item 1.2.
- Page 6 Step 1: Detach the (+) white and (-) blue wires from the Woofer 2. Step 2: Remove 4 screws from the Woofer 2. 1.5. Disassembly of Network Assembly Follow (step 1) to (step 2) of Item 1.2. Follow (step 1) of Item 1.3. Follow (step 1) of Item 1.4.
- Page 7 Step 1: Remove glue from Cord Bush. Step 2: Remove Cord Bush by pushing out with an Allen key.
-
Page 8: Connection Of The Speaker Cables
Step 3: Hold the Rear Cabinet Assembly and remove Network assembly as arrow shown. 2. Connection of the Speaker Cables - Be sure to connect speaker cables before connecting the AC power supply cord. - The load impedance of any speaker used with this unit must be 6 - Be sure to connect the cable from the right speaker to the right terminal and the cable from the left speaker to the left terminal. - Page 9 negative (-) speaker wires. - Be sure to connect only positive (white) wires to positive (+) terminals and negative (blue) wires to negative (-) terminals. Incorrect connection can damage the speakers. Positioning for best effect How you set up your speakers can affect the bass and the sound field. Note the following points.
-
Page 10: Exploded View
Note that some experimentation can yield the smoothest low frequency performance. Placement near a corner can increase the apparent output level, but can result in unnatural bass. 3. Connection of Wiring Diagram 4. Exploded view 4.1. Cabinet Parts Location... - Page 11 4.2. Packaging Note: The diagram below shows the packaging for SB-FSC40P-S. Please also refer to Service Manual of SB-PS40P-S (MD0512474C1) for packaging.
-
Page 13: Replacement Parts List
SB-FSC40P-S consists of SB-PF40P-S (x2), SB-PS40P-S (x2) & SB-PC40P-S (x1). 5. Replacement Parts List Notes : - Important safety notice : When replacing any of these components, be sure to use only manufacturer’s specified parts shown in the parts list.