Profile Settings - D-Link DNH-100 User Manual

Nuclias connect

Hide thumbs Also See for DNH-100:

Table of Contents

Nuclias Connect Software User Manual

Nuclias Connect Configuration

Nuclias

Configuration

Profile Settings

The Profile Settings function allows for the management of existing networks. Navigate to Configuration > Profile Settings

to view existing sites. Select a site followed by an available network to view all settings that are available for editing: SSID,

VLAN, Bandwidth Optimization, RF Optimization, Schedule, Device Setting, Performance, WLAN Partition, and Wireless

Resources.

Once a network is selected the following screen will appear. The upload configuration function is available on the Profile

Settings > [Site] > [Network] page.

For any updates to site or network configuration to take effect, the configuration must be uploaded to the access point. Under

the Upload Configuration frame, click the Time Start drop-down menu and select the time (Immediate or Select Time) to

update the configuration to the access point.

If Select Time is selected, set the day and time to upload the configuration. Once the Time Start is defined, click Apply to initiate

the process.

Under the Run Status frame, the status of the upload configuration function will be reported. Once an update is complete, the

results will be displayed in the Results frame.

Page 22

Table of Contents