Advertisement
Quick Links
Instruction Manual
Thank you for purchasing our product.
Before installing of this product, please read the service and the wiring manual of the vehicle
as well as this instruction manual.
Also please keep this manual as long as this product is used or hand it to new owner when you
sell the vehicle or this product.
Please read carefully and understand the contents befor installing
Request
■
Note on How to use this product and installation procedure are explained in detail in this manual.
■
Please keep this manual in the vehicle to be able to check anytime.
■
This product consists of all parts which are listed on this manual. In case any parts are missing, please contact the shop you purchased.
■
BLITZ Co.,Ltd will not be responsible for any breakage and malfunctions caused in installing this product with a vehicle installed with a third party s
product(s) and with a reconstructed vehicle.
■
BLITZ Co.,Ltd will not be responsible of any breakage, malfunctions and liabilities caused by wrong installation and usage.
■
This product and its accessories may be changed without announcement for improvements.
■
This product purposes is only for the engine after idling. Please do not use it for other purpose.
！
Danger
■
Please install this product at the shop with a mechanic who has a technical knowledge about this product.
■
Please turn off the engine while installed. If not, you may suffer from carbon monoxide poisoning.
■
Please lock the tires before installing this product.
■
When you modify the safety harness of Engine, brake, Air bag or any related to the driving, Please be careful not to connect wrong harness.
Also please check if the power harness has a 30A fuse or less.
Using more than ３０Ａ may cause a fire.
■
Do not mis‑wire the harness. It may cause a malfunction and/or fire.
■
Please disconnect the ground from the battery while installing this product to avoid a fire by an electric short, breakage of
electronic part(s) and/or burn(s)
■
Please connect the harness to the safety circuit. If ignoring the connection to the parking brake or connecting to the ground directly may
cause of a breakage or serious accident.
！
Warning
■
Please do not touch the Exhaust manifold, Radiator, or Engine unit when it is hot as it would cause of severe burn.
■
Please pay attention to infant, kids or animal. It would cause of accident by swallowing the small parts.
■
When you take a ruggage in or out from the trunk, please be careful that your clothes may burn or melt by touching the tail pipe.
■
Please do not attach the controller unit at the location where it prevents the driving or the safety device such as an air bag.
■
Please do not damage any wiring(s) and/or piping(s) from the engine room while installing this product.
It would cause a fire by an electric short, breakage to the engine, vehicle and/or to the electronic part(s).
■
Please do not leave the vehicle while after idling.
！
Caution
■
Please do not drop this device before installation or installing by force. It would cause a malfunction or a breakage of the device.
■
This device is made for 12V ground vehicle. Please do not install at other vehicle.
■
Please use insulating tape for unused connector to avoid shortage.
■
Please do not use the harness which is not listed on the attachement set or carefully use after checking if it is strong enough.
■
The harness must be avoid to install spark signal, radio, HID, Navigation/TV system, and heated location such as near turbo device
causing malfunction by noise or heat.
■
Try not to bend harness near sensor and connector when installing.
■
To disconnect, completely detatch from the connector and not to pull harness itself.
■ Wipe off with soft clothes to clean the device. Do not rub strongly with the cleaner causing the device malfunction.
Request
■
Do not throw away the original detached components from the vehicle. Please keep the components securely.
We are not liable from any damages caused to the components while installing. Please be extra careful through the installation.
■
When disconnect the battery, it might cause memory loss. Follow the each vehicle instruction throughly to re‑memory after installing.
We are not liable from any memory loss.
■
Please perform regular maintenance and be extra cautious. This product's durability and components are thoroughly tested, however, depending on
the vehicle's driven condition and/or climate, the durability may decrease.
■Do not install this product at a location where it could get wet and/or highly heated. It might cause malfunction, electrocution, fire, breakage and/or burns to the products.
To install
！
Warning
■
Ask for a professional or a technician to perform the installation of this products.
■
Do not gaze the devices when you driving.
■
Park the vehicle at safe location to set the device.
■
Do not misuse, abuse, alter, decomposit the device. It causes device malfunction or accident and the warranty will be voided.
■
When malfunction occurred, (got wet/stench/smoke/strange meter movement), stop using this device immediately and contact to
the seller or installer. If you continue to use, it causes accident or vehicle fire, or severe damage.
！
Caution
■
We are not liable from any damages by using this devices or caused by the components.
■
Do not put excessive force, especially the connector. To disconnect, completely detach from the connector and not to pull the harness.
Request
■Displayed data is for reference. Follow the vehicle's genuine meter when driving.
Explanation of the mark in the content
Ignore these indications may cause serious injuries or even death to the
！
Danger
indivisual and/or to a third party.
Ignore these indications may cause serious injuries or injuries to the
！
Caution
indivisual and/or to the third party.
Ignore these indications may cause injuries or minor injuries to the
！
indivisual and/or to the third party. I may also cause malfunctions and
Attention
breakages to the product and/or to the vehicle.
Ignoring these indications may not lead 100% potential of this product
and/or cause of system failure.
Request
e
､
−１−
Please wear the gloves and goggle
to protect your eyes and hands.
Advertisement
Summary of Contents for FATT Advance Plus
- Page 1 Please wear the gloves and goggle to protect your eyes and hands. Explanation of the mark in the content Ignore these indications may cause serious injuries or even death to the ！ Danger indivisual and/or to a third party. Instruction Manual Ignore these indications may cause serious injuries or injuries to the ！ Caution indivisual and/or to the third party. Ignore these indications may cause injuries or minor injuries to the ！ indivisual and/or to the third party. I may also cause malfunctions and Attention Thank you for purchasing our product. breakages to the product and/or to the vehicle. Before installing of this product, please read the service and the wiring manual of the vehicle Ignoring these indications may not lead 100% potential of this product as well as this instruction manual. and/or cause of system failure. Request Also please keep this manual as long as this product is used or hand it to new owner when you sell the vehicle or this product. Please read carefully and understand the contents befor installing e Request ■ Note on How to use this product and installation procedure are explained in detail in this manual. ■ Please keep this manual in the vehicle to be able to check anytime. ■...
- Page 2 Equipment parts list ※Size is roughly estimated. Also Contents may change without notice. DISPLAY MODE １ ２ 3P Cross harness Main Unit Main Harness x 1（0.1m) ×1（ 1.0m) Controller Harness ×1（ 1.4m) （Sensor harness 0.4m) Attachment set ×1 Tie band/ Electro tap/ Double side adhesive) （ Instruction manual ×1 Specification This device is for the purpose of protect engine by after idling. Optional harness is required when installing. (Available separately) Slim and compact design are used on the controller. ■ Matt black body color for premium look. Also TN LCD is used for the better visiblity. ■ Enable various display by combined with 7 Segments display and a bar graph. Simple operation with 3 buttons. ■ Separate type body are used for flexible installation. ■ Installed new developed algorithm for calculating the after idle time automatically. 3 types of mode「High/Standard/Low」 can be selected. ●AUTO MODE： ●MANUAL MODE: 2CH are available for setting up the MANUAL MODE. Enable to set maxmum 600 sec(10 Min) of the after idle time Safety kill switch is originally installed. In case that the hand brake is released during the after idling, the function kills the Engine by compulsion. ●SAFETY Function： By adding the boost sensor set BS‑01( Available Separately), enable to work as a boost gauge ●OPTION： Standard options for displaying the battery voltage, digital boost pressure. as well as the peak hold and warning function ...
- Page 3 OPERATION MANUAL LIST SETTING MANUAL Please read the operation manual list together. ※ ②TIMER MODE CHANGE: TIMER MODE can be selected in AH/AS/AL/M1/M2 ①Display Change: Display can change by pressing the UP button in order of VOLTAGE⇒ＢOOST⇒TIMER TIMER TIMER A‑H A‑H TIMER TIMER hkPa BATT Push Up or Down button to Hold P button to complete the setting Hold P button at Timer Display (2) BOOST (3) TURBO TIMER (1) VOLTAGE change the mode. （SET logo turns off） (SET logo flashes） ③Countdown time setting（Manual Mode）：Countdown time can be set manually (M1/M2) no matter how long you drive the vehicle. TIMER TIMER TIMER TIMER TIMER Hold P button to complete the setting. Press P button. Hold P Button at the Timer display Press Up or Down button to Press P button. (SET logo turns off） mode （M1/M2） （SET logo flashes） set the idle time （SET logo Flashes） （SET/M1 logo flashes） ④Count down time setting（Auto mode）：Countdown time can be set up as Aut ...
- Page 4 ⑤ENGINE TYPE Setting： Select g‑c for Gasoline Engine, select d‑c for Diesel Engine. TIMER TIMER TIMER TIMER Press P button to complete For Gasoline Engine For Diesel Engine Hold P+Down button at the setting. the Timer mode ⑥BACK LIGHT Setting : BATT BATT BATT Press Up or Down button Hold P+ Up button at Hold P button to complete the setting to set up the back light the Voltage mode. (SET logo flashes） ⑦BUZZER Volume Setting： BATT BATT BATT Press Up or Down button to Hold P button to complete the setting Hold P+ Down button set up the buzzer volume at the Voltage mode. (SET logo flashes） ⑧VOLTAGE WARNING setting： BATT BATT BATT Press Up or Down button to Hold P button at the Hold P button to complete the setting set up the warning level of ...