各部の名称と働き 前面 MULTI ACCESS VIDEO AND AUDIO SERVER MAV-1000 POWER POWER インジケーター 〜 C SYSTEM SYSTEM インジケーター POWER スイッチ 〜 POWER A POWER B POWER C POWER ( 電源 インジケーター 〜 POWER ( 電源 スイッチ 〜 それぞれ対応する電源スイ ッチがONになる と緑色に点灯します。 本機の電源を入/切します。 スイ ッチが 「 」 側のと き電源がONに...
Page 9
後面 冷却ファン VS-BUS 端子 !º STATUS OUTPUT 端子 REF. VIDEO 端子と !¡ RS-232C 端子 Ω終端スイッチ TIME CODE INPUT TIME CODE INPUT 端子 REF. VIDEO VS-BUS STATUS OUTPUT RS-232C ETHER !™ ETHER 端子 SDI INPUT 7(SDDI) SDI INPUT 端子 SDI OUTPUT SDI OUTPUT 端子...
Page 15
WARNING AVERTISSEMENT: CET AVERTISSEMENT EST VALABLE POUR LES AUTRES PAYS. To prevent fire or shock hazard, do not expose the unit to rain or moisture. 1. Utilisez le cordon et la fiche d’alimentation avec prise de terre, approuvés et conformes à la réglementation relative To avoid electrical shock, do not open the cabinet.
Page 16
For the customers in the USA Attention – when the product is installed in rack: This equipment has been tested and found to comply with 1. Prevention against overloading of branch circuit the limits for a Class A digital device, pursuant to Part 15 of When this product is installed in a rack and is supplied the FCC Rules.
Overview High-speed input/output of AV files The MAV-1000 multi access video and audio server By installing the BKMA-1040 high-speed I/O can provide a highly flexible video-and-audio server processor board, input and output of AV files at high system with various channel configurations in...
Optional Boards BKMA-1010 I/O processor board Enables recording the SDI input signals (one-channel video and four-channel audio) on an HDD array unit and providing playback signals from the HDD array unit as SDI signals. BKMA-1020 input processor board Exclusive board for an input port, which enables recording the SDI input signals (one-channel video and four-channel audio) on an HDD array unit.
If they light in red with the power switches ON. there Be sure to set all three switches to ON. is a problem. In such a case, consult your Sony dealer. 2 SYSTEM (system status) indicator Lights in green when the server is operating normally.
Rear Panel Cooling fans 9 VS-BUS connector !º STATUS OUTPUT connector 1 REF. VIDEO connectors and !¡ RS-232C connector 75-ohm termination switch TIME CODE INPUT 2 TIME CODE INPUT connectors REF. VIDEO VS-BUS STATUS OUTPUT RS-232C ETHER !™ ETHER (Ethernet) connector SDI INPUT 7(SDDI) 3 SDI INPUT connectors...
Page 22
Location and Function of Parts 4 SDI OUTPUT (serial digital video/audio output) !™ ETHER (Ethernet) connector (10BASE-T, connectors 1 to 8 (BNC type) RJ-45 modular jack, conforming to Ethernet Output the serial digital video/audio signals. IEE802.3) Connect it to the Ethernet connector of the host Notes computer.
Connections Connect the HDD array units as shown below. MAV-1000 Multi access video/audio server MAV-S1000 or MAV-S1010 HDD array unit (for video) TIME CODE INPUT REF. VIDEO VS-BUS STATUS OUTPUT RS-232C BNC cables ⁄AC IN ⁄AC IN ETHER SDI INPUT...
Specifications Chroma level cont. –∞ to +3 dB (in approx. 0.0035 General dB steps) (in playback) Chroma phase cont. ±30° (in approx. 0.23° steps) Power requirements AC 100 to 240 V ±10%, (in playback) 50/60 Hz Black level cont. ±210 mV (in approx. 3.1 mV Current consumption 14.5 to 6.0 A (with eight BKMA- steps) (in playback) 1010 boards installed)
Page 25
SBX OUTPUT Serial bus extension output BNC type (5 for video, 1 for audio) 270 Mbits/s, 75 ohms REF. VIDEO Reference video input (Analog) BNC type (1 input, 1 loop- through output) Black burst signal, 0.3 Vp-p, 75 ohms, or Composite video signal, 1 Vp-p, 75 ohms, with a 75-ohm termination switch...
Page 27
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...