Page 1
Operating Instructions Functional Manual UHD LCD Display For business use TH-86EQ2W 86-inch model Model No. TH-75EQ2W 75-inch model TH-65EQ2W 65-inch model TH-55EQ2W 55-inch model TH-50EQ2W 50-inch model TH-43EQ2W 43-inch model Please read these instructions before operating your set *Actual resolution: English 3840 ×...
Dear Panasonic Customer Identifying Controls ........30 Display ·························································· 30 Welcome to the Panasonic family of customers. We hope that Remote Control Transmitter ······························· 32 you will have many years of enjoyment from your new LCD Basic Controls ..........33 Display.
Page 3
Using the simple drawing function ..... 143 Colour design settings ······································ 83 OSD settings ·················································· 83 Using Comparison mode ......144 Options ·························································· 84 Capturing a video ··········································· 144 Control settings ··············································· 84 Displaying a captured image ···························· 145 Information timing ············································ 85 Changing screen mode ···································...
Important Safety WARNING Instructions WARNING: To reduce the risk of electric shock, 1) Read these instructions. do not remove cover or back. 2) Keep these instructions. No user-serviceable parts inside. Refer servicing to qualified service personnel. 3) Heed all warnings. 4) Follow all instructions.
Any changes or modifications remain on the screen. However, it will disappear when not expressly approved by Panasonic Corp. of North a general moving picture is displayed for a while. America could void the user’s authority to operate Trademark Credits this device.
Important Safety IMPORTANT INFORMATION: Stability Hazard Never place a display in an unstable location. A Notice display may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using cabinets or stands recommended by the •...
Page 7
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug. Do not use any other type of mains lead except the one supplied with this display.
Safety Precautions Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to WARNING prevent them from being played with by young children, creating the potential risk of suffocation.
Page 9
Unplug the power supply plug from the wall outlet, • local Panasonic dealer. and then contact the dealer for repairs. Do not touch the power supply cord or the plug To cut off the power supply to this Display completely, •...
Page 10
Remove the batteries from the remote control CAUTION transmitter when not using for a long period of time. Do not place any objects on top of the Display. The battery may leak, heat, ignite or burst, resulting in • fire or damage to surrounding properties. Ventilation should not be impeded by covering the ventilation openings with items such as Remove exhausted batteries from the remote control...
Precautions for use About the screws used when using a wall hanging bracket that conforms to VESA standards Depth of screw hole Cautions when installing Screw for fixing the Display onto the wall- Do not set up the Display outdoors. hanging bracket (not supplied with the The Display is designed for indoor use.
Page 12
Make your password difficult to guess as much as • possible. Change your password periodically. • Panasonic Connect Co., Ltd. or its affiliate companies • will never ask for your password directly. Do not divulge your password in case you receive such inquiries.
● The part numbers of accessories are subject to Power supply cord change without notice. (The actual part number may TH-86EQ2W differ from the ones shown above.) (Approx. 2 m) ● In case you lost accessories, please purchase them ●...
Remote Control Batteries Attaching the Function Board When using a narrow-width function board, attach the Open the battery cover. supplied SLOT adaptor, and insert it to the expansion slot. Note ● Be sure to turn off the display unit and connected devices, remove the power plug from the socket, and disconnect the cables from the display.
Page 15
Using the screw removed in step 1, Remove the 2 screws, and then fix the function board to the SLOT remove the expansion slot cover or adaptor. function board from the display unit. To remove the function board, hold the handle of the function board and pull it out slowly in the arrow direction.
Page 16
Note ● When inserting the function board, be careful not to allow it to come into contact with the edge of the opening of the expansion slot. The display unit and the function board may be damaged. English...
Cautions when Kensington security moving 86-inch model 75-inch model 65-inch model The security slot of this unit is compatible with the Kensington security slot. 86-inch model 75-inch model 65-inch model The display has handles for carrying. Hold them when moving. Handle Note ●...
Eyebolt φ 41 mm 86-inch model 75-inch model or less The display has holes for attaching eyebolts (M10). When installing, use them to suspend the display. Use the eyebolt only for temporary suspension or movement for installation. This cannot be used for 12 mm to permanent hanging installation.
Connections 75-inch model 65-inch model 55-inch model 50-inch model 43-inch model Back of the unit AC cord connection and fixing / Cable fixing 86-inch model Back of the unit Insert the AC cord securely all the way seated on the back side of the unit. AC cord fixing AC cord (supplied) AC cord...
Page 20
Cable fixing 1. Attach the clamper Note Note ● 2 clampers are supplied with this unit. Fix the cables ● Wipe off dirt, such as dust, water and oil on the at location as shown below. attachment surface, and affix the clamper on the If you need more clampers, purchase them from your attachment surface by pushing it firmly.
Video equipment connection SERIAL IN: SERIAL Input Terminal USB-C HOST: USB-C terminal Control the Display by connecting Connect a PC or video equipment to PC. that has a USB-C terminal. Also, this can be used to supply power (see page 24) of up to 60 W to an external LAN: LAN Terminal...
HDMI IN 1, HDMI IN 2 and HDMI IN 3 Before connecting terminals connection ● Before connecting cables, carefully read the operating instructions for the external device to be connected. Note ● Turn off the power of all devices before connecting ●...
Pin assignments and signal names for HDMI PC IN terminal connection Terminal (Female) Pin No. Signal name (Male) T.M.D.S Data2 + T.M.D.S Data2 Shield Connect a cable which matches T.M.D.S Data2 - the audio output T.M.D.S Data1 + terminal on the T.M.D.S Data1 Shield computer.
Note SERIAL IN terminal connection ● Component video signal is supported with this The SERIAL terminal conforms to the RS-232C interface terminal (Mini D-sub 15P). specification, so that the Display can be controlled by a Select an input signal mode with [Setup] - [PC input computer which is connected to this terminal.
Page 25
“ER401” command back to the computer. ● When sending a command which does not require parameter, a colon (:) is not needed. ● Consult your local Panasonic dealer for detail instructions on command usage. For more details, visit the following web site. https://panasonic.net/cns/prodisplays/ English...
AUDIO OUT terminal connection IR IN / IR OUT terminal connection Connect the stereo mini plug (M3) cable from the IR Note OUT terminal of the first display to the IR IN terminal of ● Audio equipment and the cable shown are not the second display.
USB / USB DEVICE terminal connection Connect the USB memory (commercially available) to use “USB media player” or “Memory viewer”. (see page 115, 127) Connect a USB mouse to use the mouse annotation function (see page 152). Also, power is supplied when a separately sold stick PC, etc.
Depending on the USB memory device, the access • USB-C / USB DEVICE terminal indicator may remain blinking even when it is not connection being accessed, or the device is not equipped with an access indicator function, etc. In this case, The USB-C terminal of this unit supports multiple remove the USB memory device after confirming protocols and a maximum power supply of 60 W.
Page 29
USB-C cable (commercially available) USB cable (commercially available) USB peripheral device English...
Identifying Controls ● For the power button, the operation with [POWER button control setting] set to [Off] is described unless otherwise mentioned. (see page 86 [POWER button control setting]) Display 1 Power Indicator / Remote control sensor The Power Indicator will light. When the power of the unit is ON (Main Power On / Off button ( ): ON)
Page 31
6 <+ (Unit)> / <- (Unit)> Adjusts the volume. (see page 37) On the menu screen, switches settings or adjusts settings level. (see page 41) 7 < (Unit)> / < (Unit)> Selects the setting item on menu screen. (see page 8 <ENTER (Unit)>...
14 RECALL Remote Control Transmitter ● Displays the current setting status of Input mode, Aspect mode, etc. (see page 36) 15 RETURN ● Used to return to the previous menu. (see page 41) 16 FUNCTION ● Displays [Function button guide]. (see page 82) 17 OFF TIMER ●...
Basic Controls Connect the AC cord plug to the Display. (see page 19) Connect the plug to the socket outlet. Main Power On / Off button ( ) (Back of the unit) Note ● Main plug types vary between countries. The power plug shown at left may, therefore, not be Main power switch ( AC cord...
Page 34
Indicator - blue), press <Standby (ON/OFF) button>, could not use the Web Control function and for communication then the power will be turned off. control via a LAN (including Panasonic application software). ● Power Indicator: Orange or purple (standby) Password policy...
[SLOT]: Input signal of the function board [PC]* PC IN terminal, PC input [Screen Transfer]: Input that displays images transmitted via network using “Screen Transfer”, a dedicated application by Panasonic [USB]* : USB terminal, USB input [Internal Memory]* : Image input from the internal memory [MEMORY VIEWER]: USB terminal, “Memory viewer”...
RECALL Note ● Inputs set for [Input skip settings] or inputs when each It is possible to check the setting status of input label, function is disabled cannot be selected. (see page 61) picture mode, etc. ● Displays the signal name as set in [Input label]. (see Press <RECALL>.
Volume Adjustment OFF TIMER Press <VOL +> <VOL -> or <+ (Unit)> <- (Unit)> to The Display can be preset to switch to stand-by after a adjust volume. fixed period. (30 min, 60 min, 90 min) The setting switches each time <OFF TIMER> is pressed.
■ ASPECT Controls List of Aspect Modes Aspect Description mode Press <ASPECT> or <ENTER (Unit)> repeatedly to Picture Enlarged screen move through the aspect options: Full Pictures are displayed filling the screen. Normal Pictures are displayed with the aspect ratio of input signals.
Page 39
Note ● This display incorporates several types of aspect mode select functions. If a mode whose aspect ratio is different from that of TV program content is selected, the on-screen appearance will differ from that of the original images. Note this point when selecting an aspect mode.
Digital ZOOM Exit the digital zoom mode. Press <RETURN> to exit the mode. The screen returns to the previous state just before entering the digital zoom mode, and the digital zoom Select the screen areas (25 areas) to zoom in, and operation guide display disappears.
On-Screen Menu Set. Press to set. Displays Display the menu screen. Remote Control INPUT MENU ENTER Press to set. Press to select. Exit from the menu. Unit INPUT MENU ENTER Press for several times. Press. Each time the button is pressed, the menu screen Press <RETURN>...
Page 42
Menu display list [Setup] menu ● Menu that cannot be adjusted is greyed out. (see page 52 ‒ 89) Adjustable menu changes depending on signal, input and menu setting. Setup Signal [Position] menu Power on settings (see page 43) Input search Failover/Failback Position Screensaver Default...
Adjusting Position Auto setup When inputting a PC signal, [H-position] / [V-position], [H-size] / [V-size], [Clock phase] and [Dot clock] are Press <POSITION> to display the automatically corrected. [Position] menu. This setting is enabled under the following condition: Position ● This setting is enabled when an analogue signal Default Default...
Page 44
Note [H-position] Adjust the horizontal position with ● In some cases, noise appears outside the area picture is displayed, but it is not a malfunction. ● [Clock phase] and [Dot clock] are enabled only when [PC input mode] is set to [PC] in PC IN input. [H-size] Adjust the horizontal size with [V-position] Adjust the vertical position with...
Picture Adjustments [Picture mode] This menu switches to easy-to- see pictures suitable to the picture source or environment where this Press <PICTURE> to display the unit is used. [Picture] menu. [Vivid signage]: Suitable for signage applications Picture featuring more vivid and sharper Default Default images in bright environments such...
Page 47
[Sharpness] Adjusts picture sharpness. 3 Select [Yes] with and press Less ↔ More <ENTER>. [Enhance level] Switches the effect range for Adjust colour temperature sharpness. [High]: Large effect Overwrite colour temperature “User1”? [Low]: Small effect [Gamma] Adjusts gamma. 4 Set each item on detail settings [2.0], [2.2], [2.4], [2.6], [DICOM]: screen.
Page 48
[Colour Adjusts the colour tone of R (red), [Dynamic Automatically adjusts the contrast by management] contrast] G (green), B (blue), complementary determining the changes in the use colours (cyan, magenta and yellow) of colours for images that constantly and the intermediate colours on the change, such as motion pictures.
Picture Profiles Overview of Picture Profiles Original picture Adjust picture. Up to 6 combinations of picture adjustment values (in the [Picture] menu) can be stored in the display memory (see page 46 ‒ 48) as profiles and applied as needed, for a convenient way to enjoy your preferred picture settings.
When you finished entering the profile Saving profiles name, select [Ok] with Follow these steps to save picture adjustment values as press <ENTER>. profiles. Specify the picture quality in the MY MEMORY1 █ [Picture] menu. (see page 46 ‒ 48) In the [Picture] menu, select [Memory save] with and press <ENTER>.
■ Renaming profiles When profile is being loaded, profile name is In the [Picture] menu, select [Memory displayed. edit] with and press <ENTER>. Memory save Full Memory load Memory name: MEMORY2 Memory edit Select [Memory name change] with and press <ENTER>. Note Memory edit ●...
Setup menu Signal Examples of [Signal] submenu screen When HDMI is selected Press <SETUP> to display the [Setup] menu. Signal YUV/RGB-in select Setup Cinema reality Signal Noise reduction Auto Power on settings MPEG noise reduction Input search Signal range Full(0-255) Failover/Failback Dynamic backlight control Screensaver...
Page 53
■ [MPEG noise reduction] When PC[YP ] is selected Reduces block noise and mosquito noise on MPEG Signal videos. Cinema reality [Off]: Noise reduction Auto MPEG noise reduction Disables [MPEG noise reduction]. Input level [Min], [Mid], [Max]: Dynamic backlight control Sets strength of [MPEG noise reduction].
Page 54
■ [Dynamic range] Note This menu is displayed in HDMI IN 1, HDMI IN 2 and ● The screen may become dark if menu operation or HDMI IN 3 inputs. input signal switching is performed while the on- screen menu is being displayed with this function set Switches the dynamic range.
● When [Maximum VOL function] is set to [On], the Power on settings volume cannot be set to the level higher than the level set for [Maximum VOL level]. Makes various settings at power-on. ■ [Power on settings] - submenu screen [Power ON screen delay] When multiple displays are installed and are turned Power on settings...
■ [Information(Colour design)] [Input search] - submenu screen Sets the display/non-display of the message notifying Input search [Colour design settings] is set to [Universal] when the Input search Custom power is turned on. 1st search input (None) [On]: 2nd search input (None) The message is displayed when the power is ■...
■ [Changing delay] Failover/Failback Sets the delay time until the input is switched during Automatically switches to the backup input if an [Input detection]. interruption of video occurs. [Off]: Switches the input if a signal is interrupted even for a very short period. Note 1 ‒...
Page 58
[Input change mode]: [On] detailed Main settings HDMI1 HDMI2 Switches to the backup input if an interruption of USB/ video occurs. HDMI3 Internal Memory Note USB-C ● This function will start operating once a video signal is SLOT detected by both the input in use for viewing and the HDMI1 backup input and the [Backup input change] item is HDMI2...
[Power management mode] is set to [Input To set interval of Screensaver • detection]. (see page 61) Select [Interval] in [Mode]. [SLOT power link] is set to [On]. (see page 88) • Set [Periodic time]. ● When set to the USB input, the unit determines video ●...
To turn the power off after Screensaver Input label Select [Standby after SCR saver] in [Mode]. This function can change the label of the Input signal to Set [Screensaver duration]. be displayed. ● Press once to change the time by 1 minute. [Input label] - submenu screen Keep pressing down to change the time by 15 minutes.
1-2 [Power management mode]: [Custom] Input skip settings The menu of the power consumption reduction For all inputs, this function sets whether to skip those is individually set. This setting is enabled when inputs when <INPUT> is pressed. [Power management mode] is set to [Custom]. [Input skip settings] - submenu screen 1-3 [Power management mode]: [Input Input skip settings...
Page 62
■ ■ [HDMI2 power management] [SLOT power management] When this function is set to [On], it operates under When this function is set to [On], it operates under the following conditions to turn the power on or off the following conditions to turn the power on or off automatically.
[Mode 2]: Audio input select If a video signal (synchronized signal) is detected at any of the input terminals for which the “Power [Audio input select] - submenu screen management” function is set to [On], the power Audio input select is turned “ON”, and the input is switched to the HDMI1 HDMI1...
Wireless presentation link This menu configures the settings for wireless presentation system connection. For details, refer to the operating instructions on the following support site. (https://panasonic.net/cns/prodisplays/wps2/) ■ [Webex link] Sets the link of a Webex device. [Off]: Does not link with a Webex device.
■ [SLOT] HDMI-CEC settings Displays the device to operate when HDMI-CEC Set for HDMI-CEC function. compatible device is connected to SLOT terminal. For details of HDMI-CEC function, refer to “Using HDMI- Note CEC function”. (see page 154) ● The setting item [SLOT] is displayed only when the [HDMI-CEC settings] - submenu screen function board is inserted into the SLOT.
USB media player (see page [Image select] 116)) Select the image to display. File and folder names are displayed on the file list [Default image]: Panasonic logo (blue background) with conditions as below. [User image]: Image registered by the user ‒ I f a file or folder is placed directly under the root Note directory of the USB device.
[Read user image] Note Register the image read from a USB memory device. ● When there is no [User image] that have been read, [Clear user image] is greyed out and cannot [Read user image] - submenu screen be selected. Read user image ●...
● When [Multi screen display] is set to [Off], adjust OSD language to the same angle of view for [Position] (see page 43). Then, set [Multi screen display] to [On]. Again, Select your preferred language. make fine adjustment of the angle of view for Selectable languages [Position].
Displays the entire image including the joint area. Note (Suitable when displaying character information ● [Video conference mode settings] and [Frame control] on PC.) cannot be used simultaneously. Only one of them can be used. Setting value: 100 ● When any of [1] to [4] is set, and signals over a vertical frequency of 60Hz are input, the unit may not perform control operation as intended.
Page 70
■ [Installation method] Note Sets the installation method of displays that make up ● [16:9 V fit] and [16:9 H fit] keep the aspect ratio 16:9 the portrait display. but [Full] doesn’t. [Portrait 1 screen]: Setting configuration of [Portrait ■ [Bezel adjustment] 1 screen] Adjusts the area of image hidden in the joint area on...
Whiteboard settings Video conference mode settings Configure settings for the WhiteBoard function. Shortens the delay time from input to video display to configure the setting suitable for a video conference [Whiteboard settings] sub menu dialog device connected externally . Accordingly, functions to change the picture size and position can no longer be Whiteboard used.
■ Customized setting for days of the week Set up timer 1 Set [Day] to [Custom]. Sets the program to turn the power on with the specified 2 While [Day] is selected, press <ENTER>. time and video input, or to turn the power off at the The [Day] screen appears.
● The upper limit of date and time that can be set is, Date and time Year 2035, Month 12, Day 31, Hour 23 and Minute Set date and time. ([- -] shows no programme is set.) [Date and time] - submenu screen ■...
● Depending on the network environment, Network settings synchronization may be largely lost. Set when networking with a computer. ● Synchronization is not possible if a router is placed between the displays with [Parent] and [Child] set. Note ● Synchronization is not possible via a wireless LAN. ●...
Page 75
■ [Network control] [Off]: Disables the notification. Set when controlling with the unit’s LAN terminal. [On]: [Off]: Enables the notification. Invalidates control with LAN terminal. [Notified IP address 1], [Notified IP address 2]: (In this case, the power consumption of Standby condition (when the power is turned off with the Set the IP address of the PC where the status of this remote control) will be slightly reduced.)
Page 76
■ [LAN setup] Select [Save] and press <ENTER>. Detailed network settings for the LAN can be configured. Save the current network Setup. Select [LAN setup] with and press <ENTER>. Note ● To use a DHCP server, make sure the DHCP LAN setup server is started.
Page 77
■ [Network status] ● Even if [DIGITAL LINK mode] is set to [Long reach], when the twisted pair cable transmitter Checks the current Network settings status. does not support the communication method of Network status [Long reach], it will not be connected properly. ●...
Page 78
[Protocol 2]: ● This function can only be selected when the Control with the sequence that is compatible with Panasonic device that supports DIGITAL LINK output Panasonic Projector. (ET-YFB100G, ET-YFB200G) is connected to a Note DIGITAL LINK IN terminal of DIGITAL LINK Terminal Board and its power is on.
■ [Video playback mode] USB media player settings Sets the video playback mode. Set for “USB media player”. If image disturbance occurs at the switching timing of For details of the function, refer to “USB media player” motion picture files during playback in [Standard] mode, (see page 115).
■ Play mode Select [Scenario file check] with and press <ENTER>. Specifies the playback mode operating with [Schedule play function]. To apply this setting to the schedule Scenario file check playback operation, restart this unit. Available Also, if the playback mode is specified for the schedule data of “Content Management Software”...
Automatically returns to the content display screen when the playback of the selected file has finished. ■ [Screen Transfer function] [Single]: Set the function to display images using Panasonic’s Plays the selected file repeatedly. dedicated application “Screen Transfer” to enable or [All]: disable.
For details, refer to the operating instructions on the ● Pressing the numeric button turns the power following support site. “ON”. (https://panasonic.net/cns/prodisplays/wps2/) [AV mute] [Wireless presentation settings] - sub menu screen ● Pressing the numeric button mutes the audio and pictures.
Note OSD settings ● When <FUNCTION> is pressed, [Function button Makes various settings for the on-screen menus. guide] will be displayed regardless of the [On] / [Off] settings. [OSD settings] - sub menu screen ■ To use shortcut (numeric buttons) OSD settings Press <FUNCTION>...
■ ■ [OSD transparency] [Security password] Sets the transparency rate of the on-screen display Set a password to protect the settings of this unit. background. Security password 0 to 100 Security password Password ■ ******** [OSD memory] Save Sets whether or not to hold the cursor position on the [Security password] menu screen.
■ ■ [Serial control] [Serial ID group] Selects the RS232-C control terminal. When controlling multiple displays simultaneously via serial communication, those displays are grouped as [SERIAL IN]: one. Controls using the SERIAL IN terminal of the A to G (7 groups) display.
■ [No signal warning timing] [Portrait]: The on-screen display rotates clockwise by 90 Set up the detecting time for no signal warning. degrees for easy view in the portrait setting. (Range: 01 ‒ 60, Interval: 1 minute) Power indicator ■ [No signal error] When set to [On], the display sends out the no signal error.
■ [LAN terminal setting] Note Selects a terminal for LAN control. ● The synchronized signal supports the following inputs only. [LAN terminal]: [PC]: HD/VD signal input only Controls from the LAN terminal of the main unit. [PC[YP ]]: Only the synchronized signal [DIGITAL LINK SLOT]: superimposed on Y signal input Controls from the LAN control terminal of the...
■ ■ [Button lock] [Controller user level] Limits operation of the buttons on the unit. Limits operation of the buttons on the remote control. [Off]: [Off]: All the buttons on main unit can be used. You can use all of the buttons on the remote control.
Page 89
■ [SLOT standby] Sets the power supply status for the SLOT when the unit is in standby mode. [Off]: The power is not supplied to the SLOT when the power is turned off by the remote control, etc. [On]: The power is supplied to the SLOT when the power is turned off by the remote control, etc.
Using Network ● When [Quick start] is set to [Off], the power can be turned off via network control even if [Network control] is set to [On]. However, the power cannot be turned Function on from standby state with the exception after a wake-up message (magic packet) is sent from the network equipment in the network.
Received data Control Command via LAN Last Control Control The communication differs whether [Setup] - [Network Data part terminal symbol symbol settings] - [LAN control protocol] is set to [Protocol 1] or symbol [Protocol 2]. Control command 1. When [LAN control protocol] is set (STX) (ETX) (CR)
Page 92
With some of the commands, a part of character string of the transmitted data may not be included in the received data. ● Consult your local Panasonic dealer for detail instructions on command usage. For more details, visit the following web site. https://panasonic.net/cns/prodisplays/...
The name selected in [Display name] is returned. 30: Shutter mode Off (picture and audio mute INF1? Manufacturer name query deactivated) Returns “Panasonic”. 31: Shutter mode On INF2? Model name query (picture and audio on Returns “55EQ2W”. mute) (Example: 55-inch EQ2W...
90 days after the installation to the computer has completed. 41: USB / Internal Memory ● For more details, visit the following web site. 42: MEMORY VIEWER https://panasonic.net/cns/prodisplays/ 51: Screen Transfer IRES ? Input signal resolution query ● About early warning function, visit the following web site.
Connecting with Using Web Browser Control You can use a Web browser to control the unit and set Note up a network and password. ● To use the network function, set each item in [Network settings] and be sure to set [Network Before Using Web Browser Control control] to [On].
● Depending on the browser, displayed operations may change. ● Under no circumstances, Panasonic Connect Co., Ltd. or its associated companies will ask customers their password directly. Even if you are asked directly, please do not reveal your password.
■ Network status page Operating with Web Browser Displays the current configuration information of the ■ network. Description of each section Click [Status] → [Network Status]. Displays the configuration details of wired LAN. ■ Input information page Page tab Click these to switch pages. Displays the input information of this unit.
Page 98
■ Detail control page Complete the detailed settings and click [Next]. The detailed functions of the unit can be performed. Click [Display control] → [Advanced control]. In this window, DNS server and HOSTNAME (up to 20 characters) settings can be made as well as address information set on the [LAN setup] menu of the display.
Page 99
[DIGITAL CERTIFICATE] Note Register the electronic certificate (extension: PFX) ● Date and time is displayed as [- -] when they are not for authentication. set. [CA CERTIFICATE] ● When [Network control] is set to [On] and it is in standby mode, date and time display will be blank Register the CA certificate (extension: CER) for and they cannot be set.
Page 100
■ ■ Command port set up page SNMP set up page Set the port number to be used with command control. Sets the various items for SNMP. Click [Detailed set up] → [Command port set up]. SNMP (Simple Network Management Protocol) is a protocol to manage devices connected to the network.
Page 101
For MIB (Management Information Base) of this unit, New password input field (re-enter for confirmation) see the web site below. Button for executing password change https://panasonic.net/cns/prodisplays ● For the settings of the SNMP manager, consult with the network administrator. English...
Page 102
Password change (user rights) About [PJLink] A user can change password only. Password input field Note ● You have to set only the password for PJLink. Current password input field ● Up to 16 characters can be used for a password. New password input field ●...
Page 103
■ [Certificate] page To perform the HTTPS communication or use the control system or application software of Crestron Electronics, Inc., it is necessary to install the certificate for authentication into the Display. Click [Detailed set up] → [Certificate]. [CRT Key generate] [Server Certificate] Generates the CRT (Certificate) key.
Page 104
Flow for setting The flow for setting differs depending on which certificate is to be used as the security certificate, either the server certificate or the self-signed certificate. Generate the CRT key. When using the server certificate When using the self-signed certificate Generate the signing request.
Page 105
Generating the CRT key Generate the CRT key used for encryption with the RSA (Rivest-Shamir-Adleman cryptosystem) public key encryption method. CRT key is a type of the private key. Click [Certificate] → [CRT Key generate] → [Execute]. The page to generate the CRT key is displayed. Click [Execute].
Page 106
Cancelling the update of the CRT key It is possible to return to the previously generated CRT key only once even if the CRT key is updated. Click [Certificate] → [CRT Key generate] → [Execute]. The page to generate the CRT key is displayed. Click [History].
Page 107
Generating the signing request When using the server certificate issued by the certification organization as a security certificate, generate a signing request necessary for application of issuing to the certification organization. Generate the signing request after generating the CRT key. Click [Certificate] →...
Page 108
Installing the certificate Install the server certificate and the intermediate certificate issued by the certification organization into the Display. Click [Generate] → [Server Certificate install] → [Browse]. A dialog to select the file is displayed. Select the server certificate file and click [Open]. If the intermediate certificate is issued from the certification organization together with the server certificate, proceed to Step 3).
Page 109
Generating the self-signed certificate When the server certificate issued by the certification organization is not to be used as the security certificate, it is possible to use the self-signed certificate generated in the Display. Generate the self-signed certificate after generating the CRT key.
Page 110
Confirming the information of the self-signed certificate Confirm the information of the self-signed certificate generated by the Display. Click [Certificate] → [Self-signed Certificate] → [Information] → [Confirm]. The information of the generated self-signed certificate is displayed. The details of each item are as follows. Item Details [Common Name]...
Page 111
■ [Crestron Connected] page Set the information required for connecting the control system of Crestron Electronics, Inc. to the Display, and the information to monitor/control the Display using the control system of Crestron Electronics, Inc. Click [Detailed set up] → [Crestron Connected]. [Control System] Configure the setting for the control system required to connect to the Display as a client.
Page 112
[Server] Configure the setting required to access the Display assigned to a server using the control system. [Use TLS] [User Name] Sets the secure communication. Enter the user name used for the connection authentication. (Up to 20 half-width characters) [Disable]: [Password] Performs the unsecured communication.
Page 113
[Auto Discovery] Set the standby process against the search protocol of the control system and the application software. [Auto Discovery] [Submit] [Disable]: Update the [Auto Discovery] setting. Disables the standby process. [Enable]: Enables the standby process and enables the automatic detection of the Display. English...
Page 114
LAN. ● Avoid operating the multiple Browser Remote Control ● For more details, visit the following web site. simultaneously. https://panasonic.net/cns/prodisplays/ ● The same operations are applicable to both administrator privileges and user privileges. ■ [Browser Remote Control] ●...
Using “USB media Single Media Player Files are played by a single unit. player” Note ● This section describes the function on the premise that a USB memory device connected to the USB memory terminal is used. When [Use memory select] is set to [Internal memory], the internal memory is used.
Motion pictures Preparation Extension Codec ■ Video Audio Supported device H.264/MPEG4 AAC-LC/LPCM/MP/ ● Commercially available USB memory devices are WMA Standard supported. (Those with security functions are not MPEG4 Visual supported. Operation is not guaranteed.) VC-1 Advanced ● USB memory devices other than those formatted in VC-1 Simple &...
Page 117
■ Scenario 8/11.025/12/16/ 8 – 320 32 – 384 The play order and time can be specified for a play file. 22.05/24/32/44.1/ Standard Save under the name (one-byte alphabetical characters) WMA 9 32 – 384 “scenario.dat” immediately below root in USB memory. WMA 10 Pro 32 –...
Group ID (for Multi Media Player) Single Media Player (Type 2) It is an ID used for grouping on a network during Multi Files will be played in the order they were listed in a Media Player conditions. scenario. Scenario, file list GroupID:Gxx : Group xx Scenario:...
Page 119
Setting example Setting example USB memory contents Parent side USB memory contents filelist.dat scenario.dat filelist.dat scenario.dat Introduction.jpg L_Introduction.jpg Contents_Video1.wmv L_Contents_Video1.wmv Contents_Video2.wmv L_Contents_Video2.wmv Contents_Video3.wmv L_Contents_Video3.wmv scenario.dat (scenario) scenario.dat (scenario) PHOTO_001:10 VIDEO_001:10 PHOTO_001:10 VIDEO_002:20 VIDEO_001:10 VIDEO_003: VIDEO_002:20 VIDEO_003: filelist.dat (file list) filelist.dat (file list) PHOTO_001:Introduction.jpg VIDEO_001:Contents_Video1.wmv GroupID:G01...
Page 120
Supplementary note Note The USB memory contents check does not determine ● While the menu screen is not displayed, you can whether or not a play file is playable. skip to the next playback file with , to the previous playback file with , or play back again from the If a file cannot be played while Media Player is active, beginning of the file with...
Network environment (Multi Media Starting / ending Media Player Player only) ■ For Single Media Player ■ Example of setting up LAN connection and Start IP address / Subnet mask 1. Insert the USB memory device for Media Player to the USB terminal on the side of the display. As mentioned below, connect several units together with LAN cables and set up IP addresses / Subnet masks so Note...
● Editing the playlist requires 2 MB or more of space in Resume Play function the USB memory device. After Media Player ends, the file to be played back next ● Use a USB memory device for which file reading and time varies depending on the setting of [USB media writing can be normally performed.
● 2. Play order / Play time setting screen When the content file is deleted with <4>, a confirmation screen is displayed before deletion. Arrange the selected content files in playback order, ● and set the playback time. If 999 content files already exist, another file cannot be added even if <1>...
Page 124
■ Schedule play mode Motion pictures When [USB media player] is set to [Enable] and Extension Codec [Schedule play function] is set to [Enable], this unit Video Audio H.264/MPEG4 AAC-LC/LPCM/MP3 enters schedule play mode, and the content is played back according to the set schedule. WMA Standard MPEG4 Visual If it entered schedule play mode at the time when the...
Page 125
■ Music playback ● If the unit enters the schedule standby mode after one minute before the power-on schedule, the power Music content is played back at the time set with the is not turned on at the specified time by the schedule schedule data.
Page 126
■ ■ Caption display Resume play A caption is displayed at the time set for the schedule Sets the operation when the schedule playback is data. restored again after schedule play mode is stopped once. Note When set to [On]: ●...
Using “Memory H.264/MPEG4 AAC-LC/HE-AAC/LPCM/ viewer” MPEG4 Visual VC-1 Advanced VC-1 Simple & Main H.265/HEVC The “Memory viewer” selects still pictures and motion wmv asf H.264/MPEG4 LPCM/MP3/ pictures stored in a USB memory device or internal WMA Standard/WMA9/ memory, and show them on the display. MPEG4 Visual WMA10 Pro VC-1 Advanced...
Page 128
● If the file name including the file path (folder Audio information) and extension has 248 one-byte Codec Sampling Bit rate (kbps) alphanumeric characters or more, the thumbnail is not frequency (kHz) displayed. (see page 129) 8/11.025/12/16/ 8 – 320 ●...
Displays the type of content, display order and Displaying the “Memory viewer” playback method with icons. screen Type of content Press <INPUT> to switch the input to [MEMORY VIEWER]. [Picture] [Picture / Video] Assigning [Input] function to the numeric buttons (<1> to <6>) can switch to [MEMORY VIEWER] with a single [Video] [Video / Music]...
<4> : Not used Playing the pictures <5> : Display / Hide the remote control operation guide. <6> : Not used Pressing <ENTER> during play stops the play temporarily. Press it again to restart the play. Pressing during play starts the play from the previous picture and pressing from the next picture.
Page 131
Press the remote control buttons to perform the following operations. Pressing <4> during play will rewind and <6> will fast forward the video. The speed changes in 2 steps each time you press the button, and returns to the normal play. : Skip to the previous file.
Using the WhiteBoard function Note ● To use the WhiteBoard function, an external touch panel or mouse is required. ● When using the WhiteBoard function, select [Setup] - [Whiteboard settings], and set [Whiteboard] to [On]. (see page ● When using a mouse, use click operation. ●...
Page 133
Zoom Sets zoom mode in which you can expand or shrink the image. App Launcher Starts up App Launcher on this unit. (see page 151) Volume level control / Mute You can adjust the volume level by clicking the buttons. Click to mute the sound;...
Using Built-in WhiteBoard The built-in WhiteBoard allows you to use the display as a whiteboard and perform pen drawing such as marking on an image. ■ About the built-in WhiteBoard To enable pen drawing, select [Setup] - [Whiteboard settings], and set [Whiteboard] to [On]. (see page 71) •...
Transparent mode (Drawing on video and still image) Drawing will be made on the image of the computer or HDMI input shown on the display. Switch to an input source. Start up WhiteBoard from Control menu. The display enters the transparent mode allowing you to draw on video or still image. Main menu Click the function button on the Main menu to switch between the modes.
Main menu Click the function button of the main menu to activate the desired function. The function buttons displayed differ depending on the mode. Display Main menu The main menu will appear on the side where you click shown in the right or left of the screen. Main menu Main menu Minimizes the menu.
Page 137
■ Setting menu The setting menu for the built-in applications including WhiteBoard is as follows. Guide text: Used to set the text displayed under the buttons on the Main menu. Page menu display position: Used to set the position at which the page menu is displayed. Displays distance/angle information when possible.: Used to set the display of information about the length (distance) and angle in line or figure drawing.
How to perform pen drawing Select a function in the main menu before starting drawing. Click a drawing button. Changing drawing settings Pen / Marker / Line / Shape / The colour and thickness of the Pen and Marker can be Stamp changed separately.
Page 139
Drop the mouse, and the lines of the traced part are erased by the object drawn. All are cleared. (By drawing object) Note ● It is not possible to delete only part of a drawing object. If you accidentally delete one, Click the [Undo] button on the menu to restore it.
Selecting the mode Click [Whiteboard] or [Transparent] on the main menu to switch the drawing mode. Transparent: Switches to transparent mode Whiteboard: Switches to WhiteBoard mode The input does not switch to [WHITEBOARD]. Note ● When the input is [WHITEBOARD], only the WhiteBoard mode can be used. It is not possible to change the mode. Saving pen drawings (File menu) Drawings can be saved in the internal memory or USB memory together with the background image, and read as a page.
Page 141
File menu operation The setting menu for WhiteBoard is illustrated below: New file (no change in advance) New file (drawing data changed) Select [New file] to create a new file. At that time, if any changes have been made on WhiteBoard in advance, a dialog prompting you to save the data will be displayed.
Read other file format Loads a file in a format other than the pwb format. Usable formats are “JPEG”, “PNG”, “SVG”, “PDF”, and folder (all loadable images in the folder are loaded). On the left pane, you can select capture data or USB memory for the location from which a file is loaded. When you select a file, the file name, format, and location are displayed at the lower right.
Using the simple drawing function In addition to the WhiteBoard function, this unit has a “simple drawing function” that allows you to make drawings easily with a pen or marker. ● It operates under the following conditions where WhiteBoard cannot be used: When USB input is active •...
Using Comparison mode Use the Comparison mode function to compare the image from the real projector with the data on the internal memory or USB memory. ■ About Comparison mode ● When starting this function, it is possible to automatically switch to the input to which a real projector is connected. (see page 137) ●...
Displaying a captured image Select a captured image and display it on the screen. Click the [Image list] button in the [Comparison mode] menu Click to display a list of captured images inside the menu. If you click the image part of the displayed image list, the image will be enlarged on the screen. If the displayed image list does not fit on the screen, use the up and down arrows to switch.
Selecting an image file for comparison Select an image file to compare. Click the [Folder] button in the [Comparison mode] menu The image file selection screen is displayed. At that time, the [Comparison mode] menu is disabled. The image file selection pane is displayed on the left side of the screen, and the image files of the selected folder are displayed on the right side.
Expanding / Shrinking the screen You can expand the screen display. A zoom icon is displayed when zooming is enabled. Zoom enabled / Magnification Note display ● Use “Expand/Shrink” button to zoom up/down the screen. ● Use the 4-way move button to move the image in that direction. Expand ●...
Drawing on screen Click the pen button in the Control menu while the comparison mode is set A simple drawing menu is displayed instead of the comparison mode menu. Note ● It is different from the drawing function of WhiteBoard. (Simple drawing function see page 143) Pen and marker can be selected for drawing.
Performing a capture operation Start “App Launcher” from the control menu. App Launcher Start [Capture] from App Launcher. Capture App will start. Click the Capture button (on the right or left) An image is captured according to the function. The capture function of this unit has the following two modes: Video only (left button): Captures only a video, not including drawings on WhiteBoard Screen shots are saved during zooming, simple drawing, screen splitting, or image display is active.
Using the video mask function Start “App Launcher” from the control menu. Start [Mask picture] from App Launcher. Two functions are available. Spotlight mode The entire screen is masked and a part is cut out in a square to show the image. You can move it by dragging and pinch the four corners to change the size.
Use various application functions This unit has various other built-in applications. A list is displayed on App Launcher. File Utility It exchanges data between the internal memory and USB memory. Selecting a function displays the screen for it. Copy whiteboard data file: Copies saved data on built-in WhiteBoard.
Using the WhiteBoard function (Mouse Annotation) Connecting a mouse to this unit enables operations of the WhiteBoard menu. Also, the zoom function can be operated using the mouse wheel. Note ● The WhiteBoard menu does not support vertical installation of the main unit and image rotation. Mouse menu When the mouse is connected, the setting menu is displayed by right-clicking.
Annotation A marker is drawn by moving the mouse while left-clicking. The drawn marker is erased after the time set on the menu has elapsed. All erasure after the set time A marker is drawn by moving the mouse while left- After drawing is complete, all drawing is erased clicking in [Annotation] operation state.
Using HDMI-CEC Interlocking devices function Performs the following interlocking operations by setting each item of [Link function] for [HDMI-CEC settings]. ■ [Display → Device] interlocking When set to [Power off] or [Power off / on]: The HDMI-CEC function enables the remote control •...
■ Menu operation of HDMI-CEC compatible Operating a device (using the remote devices control of this unit) When the setting menu of the HDMI-CEC compatible Display the operation screen in [Setup] - [HDMI-CEC device is displayed, it is possible to operate the menu settings] - [HDMI-CEC operation].
Using ARC function Switching audio output destination Performs the following operations by setting [ARC] ARC (Audio Return Channel) is a function that sends related items for [HDMI-CEC settings]. digital audio signals from an HDMI terminal. ■ [ARC]: [Auto] It is a function that enables the audio input into the HDMI terminal, audio input terminal, etc.
Using data cloning Content in the internal memory ■ Supported device ● Commercially available USB memory devices are Menu settings and adjusted values of a single display supported. (Those with security functions are not can be copied to multiple displays by using a USB supported.) memory or via LAN.
Select [Yes] with and press Copying the display data to the USB <ENTER>. memory Data copy to the USB memory starts. Insert the USB memory device to the USB terminal on the side of the Data to USB memory display. The data will be overwritten when any data exists originally.
Enter the cloning password, and then Copying data to other display via press <ENTER>. Data cloning screen is displayed. Display [Setup] menu pressing Select [USB memory → Display] with <SETUP>. and press <ENTER>. Select [Options] with and press Select copy type <ENTER>.
Page 160
Press <ENTER>. LAN data cloning Cloning finished. Select [Execute] with and press <ENTER>. LAN data cloning Status Display name IP address Execute EQ2-001 192.168. 0. 1 Select display EQ2-002 192.168. 0. 2 Write protect EQ2-004 192.168. 0. 4 EQ2-005 192.168. 0. 25 Status Display name IP address...
Changing the cloning password Changes the cloning password required to use the cloning function. Display [Setup] menu pressing <SETUP>. Select [Options] with and press <ENTER>. The following display appears. Options Display information Software licenses Cloning password USB data cloning LAN data cloning Output log data Security password Shipping...
USB memory Saving the LAN setting file to the USB memory device network settings Create the following files, and save them to the USB memory device. File name: th-55eq2_network.sh Using a USB memory device, the network setting can be Setting Example made for multiple displays.
Note ● Deleting the rows “S”, “G”, “P” or “E” will not overwrite the deleted setting items. The original setting contents are retained. ● When the row “I” is deleted, it will be set to [ON] automatically. ● Be sure to fill in the rows of the fixed character and IP address.
ID Remote Control Sets the units digit. ● The steps from 3 to 5 need to be done within 5 Function seconds. ● Adjustable ID number range is 0 ‒ 100. Example: To set the ID to “1”: After step 3, press <0> and • You can set the remote control ID when you want to use then <1>.
Entering characters Select Space key with , and press <ENTER>. MY █ Some settings require to enter characters. To enter text, select characters in the on-screen keyboard. Example: Entering profile names ([Memory save]) MEMORY1 █ – Delete All delete Cancel a/A/@ Space key As shown in step 3, select the characters to enter...
Preset Signals This unit can display the video signals shown in the table below. Scanning Plug and Play-supported signal* frequency Dot clock Corresponding Resolution frequency Format* HDMI USB-C signal (Dot) Horizontal Vertical (MHz) (kHz) (Hz) 60p* 480/60i 720 x 480i 15.73 59.94 13.50...
Page 167
Scanning Plug and Play-supported signal* frequency Dot clock Corresponding Resolution frequency Format* HDMI USB-C signal (Dot) Horizontal Vertical (MHz) (kHz) (Hz) 60p* 640 x 480/75 640 x 480 37.50 75.00 31.50 R/H/UC/DL 640 x 480/85 640 x 480 43.27 85.01 36.00 R/H/UC/DL 800 x 600/56 800 x 600...
Page 168
Scanning Plug and Play-supported signal* frequency Dot clock Corresponding Resolution frequency Format* HDMI USB-C signal (Dot) Horizontal Vertical (MHz) (kHz) (Hz) 60p* 1440 x 900/60 1 440 x 900 55.47 59.90 88.75 R/H/UC/DL 1440 x 900/60 1 440 x 900 55.92 60.00 106.47 R/H/UC/DL...
■ Shipping condition Unit Press <MENU (Unit)> for several times and display the [Setup] menu. It is possible to reset the following data to the factory Select [OSD language] with , and settings. then press and hold <ENTER (Unit)> Settings and set values of [Picture], [Sound], [Setup] and for more than 5 seconds.
Initialization Initializing the [Controller user When both main unit buttons and remote control buttons level] are disabled due to the [Button lock], [Controller user level] and [Controller ID function] settings, set all the values [Off] so that all the buttons are enabled again. Press <- (Unit)>...
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Check Picture Sound Electrical Appliances Cars / Motorcycles Fluorescent light Interference Noisy Sound Volume (Check whether the mute function has been activated on the remote control.) Normal Picture No Sound...
Page 172
Symptoms Check The image position has been adjusted in the [Position] menu. The top or bottom of the picture on the Adjust the position of the picture on the screen. screen is cut off. (see page 43, 44) There are areas at the top and bottom When using a video software program (such as a cinema size program) of the screen where picture is not with a screen wider than one in the 16:9 mode, blank areas separate from...
Page 173
LCD Display panel Symptoms Check The screen will darken slightly when photos, still images of a computer or The screen darkens slightly other pictures with minimal movements are shown for an extended period. when bright pictures with minimal This is done to reduce image retention on the screen and the shortening of movements are shown.
86-inch model 1 895.0 mm (W) × 1 065.9 mm (H) × 2 174.2 mm (diagonal) / 74.60” (W) × 41.96” (H) × 85.60” Model No. (diagonal) : TH-86EQ2W 86-inch model 75-inch model : TH-75EQ2W 75-inch model 1 649.6 mm (W) × 927.9 mm (H) × 1 892.7 mm (diagonal) / 64.94”...
Page 175
Mass AUDIO IN Stereo mini jack (M3) (φ3.5 mm) × 1, 0.5 Vrms 86-inch model Approx. 50.7 / 111.8 lbs net AUDIO OUT 75-inch model Stereo mini jack (M3) (φ3.5 mm) × 1, 0.5 Vrms Approx. 37.3 / 82.2 lbs net Output: Variable (-∞ ‒ 0 dB) 65-inch model (1 kHz 0 dB input, 10 kΩ load) Approx. 29.7 / 65.5 lbs net 55-inch model SERIAL IN Approx.
Page 176
Remote Control Transmitter Power source DC 3 V (battery (AAA/R03/LR03 type) × 2) Operating range Approx. 7 m (22.9 ft) (when operated directly in front of remote control sensor) Mass Approx. 63 / 2.22 oz (including batteries) Dimensions (W × H × D) 48 mm ×...
At least three (3) years from delivery of this product, Panasonic Connect Co., Ltd. will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright...
Page 178
Warranty Service purposes. Model Number Serial Number Panasonic Connect North America Unit of Panasonic Corporation of North America Executive Office : Two Riverfront Plaza, Newark, New Jersey 07102 Panasonic Canada Inc.